1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <device/mmio.h>
#include <delay.h>
#include <device/azalia_device.h>
#include "chip.h"
#include "pch.h"
static int codec_detect(u8 *base)
{
u8 reg8;
if (azalia_exit_reset(base) < 0)
goto no_codec;
/* Write back the value once reset bit is set. */
write16(base + HDA_GCAP_REG, read16(base + HDA_GCAP_REG));
/* Read in Codec location (BAR + 0xe)[2..0] */
reg8 = read8(base + HDA_STATESTS_REG);
reg8 &= 0x0f;
if (!reg8)
goto no_codec;
return reg8;
no_codec:
/* Codec not found, put HDA back in reset */
azalia_enter_reset(base);
printk(BIOS_DEBUG, "Azalia: No codec!\n");
return 0;
}
static void azalia_init(struct device *dev)
{
u8 *base;
struct resource *res;
u32 codec_mask;
u32 reg32;
res = probe_resource(dev, PCI_BASE_ADDRESS_0);
if (!res)
return;
// NOTE this will break as soon as the Azalia gets a bar above 4G.
// Is there anything we can do about it?
base = res2mmio(res, 0, 0);
printk(BIOS_DEBUG, "Azalia: base = %p\n", base);
if (RCBA32(CIR31) & (1 << 31)) {
reg32 = pci_read_config32(dev, 0x120);
reg32 &= 0xf8ffff01;
reg32 |= (1 << 24); // 2 << 24 for server
reg32 |= RCBA32(CIR31) & 0xfe;
pci_write_config32(dev, 0x120, reg32);
pci_or_config16(dev, 0x78, 1 << 11);
} else
printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");
pci_and_config32(dev, 0x114, ~0xfe);
// Set VCi enable bit
pci_or_config32(dev, 0x120, 1 << 31);
// Enable HDMI codec:
pci_or_config32(dev, 0xc4, 1 << 1);
pci_or_config8(dev, 0x43, 1 << 6);
/* Additional programming steps */
pci_or_config32(dev, 0xc4, 1 << 13);
pci_or_config32(dev, 0xc4, 1 << 10);
pci_and_config32(dev, 0xd0, ~(1 << 31));
if (dev->device == 0x1e20) {
/* Additional step on Panther Point */
pci_or_config32(dev, 0xc4, 1 << 17);
}
/* Set Bus Master */
pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER);
pci_write_config8(dev, 0x3c, 0x0a); // unused?
/* Codec Initialization Programming Sequence */
/* Take controller out of reset */
reg32 = read32(base + HDA_GCTL_REG);
reg32 |= HDA_GCTL_CRST;
write32(base + HDA_GCTL_REG, reg32);
/* Wait 1ms */
udelay(1000);
// Select Azalia mode. This needs to be controlled via devicetree.cb
pci_or_config8(dev, 0x40, 1); // Audio Control
// Docking not supported
pci_and_config8(dev, 0x4d, (u8)~(1 << 7)); // Docking Status
codec_mask = codec_detect(base);
if (codec_mask) {
printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
azalia_codecs_init(base, codec_mask);
}
/* Enable dynamic clock gating */
pci_update_config8(dev, 0x43, ~0x07, (1 << 2) | (1 << 0));
}
static const char *azalia_acpi_name(const struct device *dev)
{
return "HDEF";
}
struct device_operations bd82x6x_azalia_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = azalia_init,
.ops_pci = &pci_dev_ops_pci,
.acpi_name = azalia_acpi_name,
};
|
