1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
|
/*
* Copyright 2005 AMD
* by yinghai.lu@amd.com
*/
#include <console/console.h>
#include <device/device.h>
#include <delay.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <arch/io.h>
#include "bcm5785.h"
static void sata_init(struct device *dev)
{
uint8_t byte;
uint8_t *base;
uint8_t *mmio;
struct resource *res;
unsigned int mmio_base;
volatile unsigned int *mmio_reg;
int i;
if(!(dev->path.pci.devfn & 7)) { // only set it in Func0
byte = pci_read_config8(dev, 0x78);
byte |= (1<<7);
pci_write_config8(dev, 0x78, byte);
res = find_resource(dev, 0x24);
base = res->base;
mmio_base = base;
mmio_base &= 0xfffffffc;
mmio_reg = (unsigned int *)( mmio_base + 0x10f0 );
* mmio_reg = 0x40000001;
mmio_reg = ( unsigned int *)( mmio_base + 0x8c );
* mmio_reg = 0x00ff2007;
mdelay( 10 );
* mmio_reg = 0x78592009;
mdelay( 10 );
* mmio_reg = 0x00082004;
mdelay( 10 );
* mmio_reg = 0x00002004;
mdelay( 10 );
//init PHY
printk_debug("init PHY...\n");
for(i=0; i<4; i++) {
mmio = base + 0x100 * i;
byte = readb(mmio + 0x40);
printk_debug("port %d PHY status = %02x\r\n", i, byte);
if(byte & 0x4) {// bit 2 is set
byte = readb(mmio+0x48);
writeb(byte | 1, mmio + 0x48);
writeb(byte & (~1), mmio + 0x48);
byte = readb(mmio + 0x40);
printk_debug("after reset port %d PHY status = %02x\r\n", i, byte);
}
}
}
}
static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
pci_write_config32(dev, 0x40,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
static struct pci_operations lops_pci = {
.set_subsystem = lpci_set_subsystem,
};
static struct device_operations sata_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
// .enable = bcm5785_enable,
.init = sata_init,
.scan_bus = 0,
.ops_pci = &lops_pci,
};
static const struct pci_driver sata0_driver __pci_driver = {
.ops = &sata_ops,
.vendor = PCI_VENDOR_ID_SERVERWORKS,
.device = PCI_DEVICE_ID_SERVERWORKS_BCM5785_SATA,
};
|
