1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/pci_def.h>
#include <device/device.h>
/* warning: Porting.h includes an open #pragma pack(1) */
#include <Porting.h>
#include <AGESA.h>
#include <amdlib.h>
#include <northbridge/amd/pi/dimmSpd.h>
/*-----------------------------------------------------------------------------
*
* readSmbusByteData - read a single SPD byte from any offset
*/
static int readSmbusByteData(int iobase, int address, char *buffer, int offset)
{
unsigned int status;
UINT64 limit;
address |= 1; // set read bit
__outbyte(iobase + 0, 0xFF); // clear error status
__outbyte(iobase + 1, 0x1F); // clear error status
__outbyte(iobase + 3, offset); // offset in eeprom
__outbyte(iobase + 4, address); // slave address and read bit
__outbyte(iobase + 2, 0x48); // read byte command
// time limit to avoid hanging for unexpected error status (should never happen)
limit = __rdtsc() + 2000000000 / 10;
for (;;)
{
status = __inbyte(iobase);
if (__rdtsc() > limit) break;
if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
if ((status & 1) == 1) continue; // HostBusy set, keep waiting
break;
}
buffer [0] = __inbyte(iobase + 5);
if (status == 2) status = 0; // check for done with no errors
return status;
}
/*-----------------------------------------------------------------------------
*
* readSmbusByte - read a single SPD byte from the default offset
* this function is faster function readSmbusByteData
*/
static int readSmbusByte(int iobase, int address, char *buffer)
{
unsigned int status;
UINT64 limit;
__outbyte(iobase + 0, 0xFF); // clear error status
__outbyte(iobase + 2, 0x44); // read command
// time limit to avoid hanging for unexpected error status
limit = __rdtsc() + 2000000000 / 10;
for (;;)
{
status = __inbyte(iobase);
if (__rdtsc() > limit) break;
if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
if ((status & 1) == 1) continue; // HostBusy set, keep waiting
break;
}
buffer [0] = __inbyte(iobase + 5);
if (status == 2) status = 0; // check for done with no errors
return status;
}
/*---------------------------------------------------------------------------
*
* readspd - Read one or more SPD bytes from a DIMM.
* Start with offset zero and read sequentially.
* Optimization relies on autoincrement to avoid
* sending offset for every byte.
* Reads 128 bytes in 7-8 ms at 400 KHz.
*/
static int readspd(int iobase, int SmbusSlaveAddress, char *buffer, int count)
{
int index, error;
printk(BIOS_SPEW, "-------------READING SPD-----------\n");
printk(BIOS_SPEW, "iobase: 0x%08X, SmbusSlave: 0x%08X, count: %d\n",
iobase, SmbusSlaveAddress, count);
/* read the first byte using offset zero */
error = readSmbusByteData(iobase, SmbusSlaveAddress, buffer, 0);
if (error) {
printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
return error;
}
/* read the remaining bytes using auto-increment for speed */
for (index = 1; index < count; index++)
{
error = readSmbusByte(iobase, SmbusSlaveAddress, &buffer [index]);
if (error) {
printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
return error;
}
}
printk(BIOS_SPEW, "\n");
printk(BIOS_SPEW, "-------------FINISHED READING SPD-----------\n");
return 0;
}
static void setupFch(int ioBase)
{
pm_write16(0x2c, ioBase | 1);
__outbyte(ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
}
int hudson_readSpd(int spdAddress, char *buf, size_t len)
{
int ioBase = 0xB00;
setupFch(ioBase);
return readspd(ioBase, spdAddress, buf, len);
}
|
