blob: d303c4f6dfe8292f14ccad203a79b1d3267b9e0f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef HUDSON_H
#define HUDSON_H
#include <types.h>
#include <device/device.h>
/* Offsets from ACPI_MMIO_BASE
* This is defined by AGESA, but we don't include AGESA headers to avoid
* polluting the namespace.
*/
#define PM_MMIO_BASE 0xfed80300
/* Power management index/data registers */
#define BIOSRAM_INDEX 0xcd4
#define BIOSRAM_DATA 0xcd5
#define PM_INDEX 0xcd6
#define PM_DATA 0xcd7
#define PM2_INDEX 0xcd0
#define PM2_DATA 0xcd1
#define PM_ACPI_MMIO_EN 0x24
#define PM_SERIRQ_CONF 0x54
#define PM_EVT_BLK 0x60
#define PM1_CNT_BLK 0x62
#define PM_TMR_BLK 0x64
#define PM_CPU_CTRL 0x66
#define PM_GPE0_BLK 0x68
#define PM_ACPI_SMI_CMD 0x6A
#define PM_ACPI_CONF 0x74
#define PM_PMIO_DEBUG 0xD2
#define PM_MANUAL_RESET 0xD3
#define PM_HUD_SD_FLASH_CTRL 0xE7
#define PM_YANG_SD_FLASH_CTRL 0xE8
#define PM_PCIB_CFG 0xEA
#define HUDSON_ACPI_IO_BASE CONFIG_HUDSON_ACPI_IO_BASE
#define ACPI_PM_EVT_BLK (HUDSON_ACPI_IO_BASE + 0x00) /* 4 bytes */
#define ACPI_PM1_CNT_BLK (HUDSON_ACPI_IO_BASE + 0x04) /* 2 bytes */
#define ACPI_PM_TMR_BLK (HUDSON_ACPI_IO_BASE + 0x18) /* 4 bytes */
#define ACPI_GPE0_BLK (HUDSON_ACPI_IO_BASE + 0x10) /* 8 bytes */
#define ACPI_CPU_CONTROL (HUDSON_ACPI_IO_BASE + 0x08) /* 6 bytes */
#define ACPI_SMI_CTL_PORT 0xb2
#define ACPI_SMI_CMD_CST_CONTROL 0xde
#define ACPI_SMI_CMD_PST_CONTROL 0xad
#define ACPI_SMI_CMD_DISABLE 0xbe
#define ACPI_SMI_CMD_ENABLE 0xef
#define ACPI_SMI_CMD_S4_REQ 0xc0
#define REV_HUDSON_A11 0x11
#define REV_HUDSON_A12 0x12
#define SPIROM_BASE_ADDRESS_REGISTER 0xA0
#define ROUTE_TPM_2_SPI BIT(3)
#define SPI_ROM_ENABLE 0x02
#define SPI_BASE_ADDRESS 0xFEC10000
#define LPC_IO_PORT_DECODE_ENABLE 0x44
#define DECODE_ENABLE_PARALLEL_PORT0 BIT(0)
#define DECODE_ENABLE_PARALLEL_PORT1 BIT(1)
#define DECODE_ENABLE_PARALLEL_PORT2 BIT(2)
#define DECODE_ENABLE_PARALLEL_PORT3 BIT(3)
#define DECODE_ENABLE_PARALLEL_PORT4 BIT(4)
#define DECODE_ENABLE_PARALLEL_PORT5 BIT(5)
#define DECODE_ENABLE_SERIAL_PORT0 BIT(6)
#define DECODE_ENABLE_SERIAL_PORT1 BIT(7)
#define DECODE_ENABLE_SERIAL_PORT2 BIT(8)
#define DECODE_ENABLE_SERIAL_PORT3 BIT(9)
#define DECODE_ENABLE_SERIAL_PORT4 BIT(10)
#define DECODE_ENABLE_SERIAL_PORT5 BIT(11)
#define DECODE_ENABLE_SERIAL_PORT6 BIT(12)
#define DECODE_ENABLE_SERIAL_PORT7 BIT(13)
#define DECODE_ENABLE_AUDIO_PORT0 BIT(14)
#define DECODE_ENABLE_AUDIO_PORT1 BIT(15)
#define DECODE_ENABLE_AUDIO_PORT2 BIT(16)
#define DECODE_ENABLE_AUDIO_PORT3 BIT(17)
#define DECODE_ENABLE_MIDI_PORT0 BIT(18)
#define DECODE_ENABLE_MIDI_PORT1 BIT(19)
#define DECODE_ENABLE_MIDI_PORT2 BIT(20)
#define DECODE_ENABLE_MIDI_PORT3 BIT(21)
#define DECODE_ENABLE_MSS_PORT0 BIT(22)
#define DECODE_ENABLE_MSS_PORT1 BIT(23)
#define DECODE_ENABLE_MSS_PORT2 BIT(24)
#define DECODE_ENABLE_MSS_PORT3 BIT(25)
#define DECODE_ENABLE_FDC_PORT0 BIT(26)
#define DECODE_ENABLE_FDC_PORT1 BIT(27)
#define DECODE_ENABLE_GAME_PORT BIT(28)
#define DECODE_ENABLE_KBC_PORT BIT(29)
#define DECODE_ENABLE_ACPIUC_PORT BIT(30)
#define DECODE_ENABLE_ADLIB_PORT BIT(31)
#define LPC_IO_OR_MEM_DECODE_ENABLE 0x48
#define LPC_WIDEIO2_ENABLE BIT(25)
#define LPC_WIDEIO1_ENABLE BIT(24)
#define LPC_WIDEIO0_ENABLE BIT(2)
#define LPC_WIDEIO_GENERIC_PORT 0x64
#define LPC_ALT_WIDEIO_RANGE_ENABLE 0x74
#define LPC_ALT_WIDEIO2_ENABLE BIT(3)
#define LPC_ALT_WIDEIO1_ENABLE BIT(2)
#define LPC_ALT_WIDEIO0_ENABLE BIT(0)
#define LPC_TRUSTED_PLATFORM_MODULE 0x7c
#define TPM_12_EN BIT(0)
#define TPM_LEGACY_EN BIT(2)
#define LPC_WIDEIO2_GENERIC_PORT 0x90
#define SPI_CNTRL0 0x00
#define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18))
/* Nominal is 16.7MHz on older devices, 33MHz on newer */
#define SPI_READ_MODE_NOM 0x00000000
#define SPI_READ_MODE_DUAL112 ( BIT(29) )
#define SPI_READ_MODE_QUAD114 ( BIT(29) | BIT(18))
#define SPI_READ_MODE_DUAL122 (BIT(30) )
#define SPI_READ_MODE_QUAD144 (BIT(30) | BIT(18))
#define SPI_READ_MODE_NORMAL66 (BIT(30) | BIT(29) )
/* Nominal and SPI_READ_MODE_FAST_HUDSON1 are the only valid choices for H1 */
#define SPI_READ_MODE_FAST_HUDSON1 ( BIT(18))
#define SPI_READ_MODE_FAST (BIT(30) | BIT(29) | BIT(18))
#define SPI_ARB_ENABLE BIT(19)
#define SPI_CNTRL1 0x0c
/* Use SPI_SPEED_16M-SPI_SPEED_66M below for hudson and bolton */
#define SPI_CNTRL1_SPEED_MASK (BIT(15) | BIT(14) | BIT(13) | BIT(12))
#define SPI_NORM_SPEED_SH 12
#define SPI_FAST_SPEED_SH 8
#define SPI100_ENABLE 0x20
#define SPI_USE_SPI100 BIT(0)
#define SPI100_SPEED_CONFIG 0x22
#define SPI_SPEED_66M (0x0)
#define SPI_SPEED_33M ( BIT(0))
#define SPI_SPEED_22M ( BIT(1) )
#define SPI_SPEED_16M ( BIT(1) | BIT(0))
#define SPI_SPEED_100M (BIT(2) )
#define SPI_SPEED_800K (BIT(2) | BIT(0))
#define SPI_NORM_SPEED_NEW_SH 12
#define SPI_FAST_SPEED_NEW_SH 8
#define SPI_ALT_SPEED_NEW_SH 4
#define SPI_TPM_SPEED_NEW_SH 0
#define SPI100_HOST_PREF_CONFIG 0x2c
#define SPI_RD4DW_EN_HOST BIT(15)
static inline int hudson_sata_enable(void)
{
/* True if IDE or AHCI. */
return (CONFIG_HUDSON_SATA_MODE == 0) || (CONFIG_HUDSON_SATA_MODE == 2);
}
static inline int hudson_ide_enable(void)
{
/* True if IDE or LEGACY IDE. */
return (CONFIG_HUDSON_SATA_MODE == 0) || (CONFIG_HUDSON_SATA_MODE == 3);
}
void hudson_lpc_port80(void);
void hudson_lpc_decode(void);
void hudson_pci_port80(void);
void hudson_clk_output_48Mhz(void);
void hudson_read_mode(u32 mode);
void hudson_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm);
void hudson_disable_4dw_burst(void);
void hudson_set_readspeed(u16 norm, u16 fast);
void lpc_wideio_512_window(uint16_t base);
void lpc_wideio_16_window(uint16_t base);
void hudson_tpm_decode_spi(void);
void configure_hudson_uart(void);
void hudson_enable(struct device *dev);
void s3_resume_init_data(void *FchParams);
#endif /* HUDSON_H */
|
