1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/pci_def.h>
#include <device/device.h>
#include <stdlib.h>
#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
/* warning: Porting.h includes an open #pragma pack(1) */
#include <vendorcode/amd/include/Porting.h>
#include "AGESA.h"
#include "chip.h"
#include "smbus_spd.h"
#include <northbridge/amd/agesa/dimmSpd.h>
/* uncomment for source level debug - GDB gets really confused otherwise. */
//#pragma optimize ("", off)
/**
* Read a single SPD byte. If the first byte is being read, set up the
* address and offset. Following bytes auto increment.
*/
static UINT8 readSmbusByte(UINT16 iobase, UINT8 address, char *buffer,
int offset, int initial_offset)
{
unsigned int status = -1;
UINT64 time_limit;
/* clear status register */
__outbyte(iobase + SMBUS_STATUS_REG, 0x1E);
if (offset == initial_offset) {
/* Clear slave status, set offset, set slave address and start reading */
__outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x3E);
__outbyte(iobase + SMBUS_CONTROL_REG, offset);
__outbyte(iobase + SMBUS_HOST_CMD_REG, address | READ_BIT);
__outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_BYTE_COMMAND);
} else {
/* Issue read command - auto increments to next byte */
__outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_COMMAND);
}
/* time limit to avoid hanging for unexpected error status */
time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
while (__rdtsc() <= time_limit) {
status = __inbyte(iobase + SMBUS_STATUS_REG);
if ((status & SMBUS_INTERRUPT_MASK) == 0)
continue; /* SMBusInterrupt not set, keep waiting */
if ((status & HOSTBUSY_MASK) != 0)
continue; /* HostBusy set, keep waiting */
break;
}
if (status != STATUS__COMPLETED_SUCCESSFULLY)
return AGESA_ERROR;
buffer[0] = __inbyte(iobase + SMBUS_DATA0_REG);
return AGESA_SUCCESS;
}
static void writePmReg(UINT8 reg, UINT8 data)
{
__outbyte(PMIO_INDEX_REG, reg);
__outbyte(PMIO_DATA_REG, data);
}
static void setupFch(UINT16 ioBase)
{
/* set up SMBUS - Set to SMBUS 0 & set base address */
/* For SB800 & Hudson1 to SB900 & Hudson 2/3 */
writePmReg(SMBUS_BAR_HIGH_BYTE, ioBase >> 8);
writePmReg(SMBUS_BAR_LOW_BYTE, (ioBase & 0xe0) | 1);
/* set SMBus clock to 400 KHz */
__outbyte(ioBase + SMBUS_CLOCK_REG, SMBUS_FREQUENCY_CONST / 400000);
}
/**
* Read one or more SPD bytes from a DIMM.
* Start with offset zero and read sequentially.
* Reads 128 bytes in 7-8 ms at 400 KHz.
*/
static UINT8 readspd(UINT16 iobase, UINT8 SmbusSlaveAddress, char *buffer,
UINT16 count)
{
UINT16 index;
UINT8 status;
UINT8 initial_offset = 0;
setupFch(iobase);
for (index = initial_offset; index < count; index++) {
status = readSmbusByte(iobase, SmbusSlaveAddress, &buffer[index], index,
initial_offset);
if (status != AGESA_SUCCESS)
return status;
}
return status;
}
int smbus_readSpd(int spdAddress, char *buf, size_t len)
{
int ioBase = SMBUS0_BASE_ADDRESS;
setupFch (ioBase);
return readspd (ioBase, spdAddress, buf, len);
}
|