path: root/src/southbridge/amd/cimx/sb800/late.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <amdblocks/acpimmio.h>
#include <device/mmio.h>
#include <device/device.h>
#include <device/pci.h>		/* device_operations */
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <bootstate.h>
#include <arch/ioapic.h>
#include <device/smbus.h>	/* smbus_bus_operations */
#include <pc80/mc146818rtc.h>
#include <pc80/i8254.h>
#include <pc80/i8259.h>
#include <console/console.h>	/* printk */
#include <acpi/acpi.h>
#include <device/pci_ehci.h>
#include "lpc.h"		/* lpc_read_resources */
#include "SBPLATFORM.h"		/* Platform Specific Definitions */
#include "cfg.h"		/* sb800 Cimx configuration */
#include "chip.h"		/* struct southbridge_amd_cimx_sb800_config */
#include "sb_cimx.h"		/* AMD CIMX wrapper entries */
#include "smbus.h"
#include "fan.h"
#include "pci_devs.h"
#include <southbridge/amd/common/amd_pci_util.h>

static AMDSBCFG sb_late_cfg; //global, init in sb800_cimx_config
static AMDSBCFG *sb_config = &sb_late_cfg;

/**
 * @brief Entry point of Southbridge CIMx callout
 *
 * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig)
 *
 * @param[in] func      Southbridge CIMx Function ID.
 * @param[in] data      Southbridge Input Data.
 * @param[in] config    Southbridge configuration structure pointer.
 *
 */
static u32 sb800_callout_entry(u32 func, u32 data, void *config)
{
	u32 ret = 0;
	printk(BIOS_DEBUG, "SB800 - Late.c - %s - Start.\n", __func__);
	switch (func) {
	case CB_SBGPP_RESET_ASSERT:
		break;

	case CB_SBGPP_RESET_DEASSERT:
		break;

	case IMC_FIRMWARE_FAIL:
		break;

	default:
		break;
	}

	printk(BIOS_DEBUG, "SB800 - Late.c - %s - End.\n", __func__);
	return ret;
}

#define HOST_CAP                  0x00 /* host capabilities */
#define HOST_CTL                  0x04 /* global host control */
#define HOST_IRQ_STAT             0x08 /* interrupt status */
#define HOST_PORTS_IMPL           0x0c /* bitmap of implemented ports */

#define HOST_CTL_AHCI_EN          (1 << 31) /* AHCI enabled */
static void ahci_raid_init(struct device *dev)
{
	u8 irq = 0;
	void *bar5;
	u32 caps, ports, val;

	val = pci_read_config16(dev, PCI_CLASS_DEVICE);
	if (val == PCI_CLASS_STORAGE_SATA) {
		printk(BIOS_DEBUG, "AHCI controller ");
	} else if (val == PCI_CLASS_STORAGE_RAID) {
		printk(BIOS_DEBUG, "RAID controller ");
	} else {
		printk(BIOS_WARNING, "device class:%x, neither in ahci or raid mode\n", val);
		return;
	}

	irq = pci_read_config8(dev, PCI_INTERRUPT_LINE);
	bar5 = (void *)(uintptr_t)pci_read_config32(dev, PCI_BASE_ADDRESS_5);
	printk(BIOS_DEBUG, "IOMEM base: %p, IRQ: 0x%X\n", bar5, irq);

	caps = read32(bar5 + HOST_CAP);
	caps = (caps & 0x1F) + 1;
	ports= read32(bar5 + HOST_PORTS_IMPL);
	printk(BIOS_DEBUG, "Number of Ports: 0x%x, Port implemented(bit map): 0x%x\n", caps, ports);

	/* make sure ahci is enabled */
	val = read32(bar5 + HOST_CTL);
	if (!(val & HOST_CTL_AHCI_EN)) {
		write32(bar5 + HOST_CTL, val | HOST_CTL_AHCI_EN);
	}

	dev->command |= PCI_COMMAND_MASTER;
	pci_write_config8(dev, PCI_COMMAND, dev->command);
	printk(BIOS_DEBUG, "AHCI/RAID controller initialized\n");
}

static void lpc_init(struct device *dev)
{
	printk(BIOS_DEBUG, "SB800 - Late.c - %s - Start.\n", __func__);

	cmos_check_update_date();

	/* Initialize the real time clock.
	 * The 0 argument tells cmos_init not to
	 * update CMOS unless it is invalid.
	 * 1 tells cmos_init to always initialize the CMOS.
	 */
	cmos_init(0);

	setup_i8259(); /* Initialize i8259 pic */
	setup_i8254(); /* Initialize i8254 timers */

	printk(BIOS_DEBUG, "SB800 - Late.c - %s - End.\n", __func__);
}

static const char *lpc_acpi_name(const struct device *dev)
{
	if (dev->path.type != DEVICE_PATH_PCI)
		return NULL;

	switch (dev->path.pci.devfn) {
	/* DSDT: acpi/lpc.asl */
	case LPC_DEVFN:
		return "LIBR";
	}

	return NULL;
}

static struct device_operations lpc_ops = {
	.read_resources = lpc_read_resources,
	.set_resources = lpc_set_resources,
	.enable_resources = pci_dev_enable_resources,
#if CONFIG(HAVE_ACPI_TABLES)
	.write_acpi_tables = acpi_write_hpet,
#endif
	.init = lpc_init,
	.scan_bus = scan_static_bus,
	.ops_pci = &pci_dev_ops_pci,
	.acpi_name = lpc_acpi_name,
};

static const struct pci_driver lpc_driver __pci_driver = {
	.ops = &lpc_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_LPC,
};

static struct device_operations sata_ops = {
	.read_resources = pci_dev_read_resources,
	.set_resources = pci_dev_set_resources,
	.enable_resources = pci_dev_enable_resources,
	.init = ahci_raid_init,
	.ops_pci = &pci_dev_ops_pci,
};

static const struct pci_driver ahci_driver __pci_driver = {
	.ops = &sata_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_SATA_AHCI,
};

static const struct pci_driver raid_driver __pci_driver = {
	.ops = &sata_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_SATA_RAID,
};
static const struct pci_driver raid5_driver __pci_driver = {
	.ops = &sata_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_SATA_RAID5,
};

static struct device_operations usb_ops = {
	.read_resources = pci_ehci_read_resources,
	.set_resources = pci_dev_set_resources,
	.enable_resources = pci_dev_enable_resources,
	.ops_pci = &pci_dev_ops_pci,
};

/*
 * The pci id of USB ctrl 0 and 1 are the same.
 */
static const struct pci_driver usb_ohci123_driver __pci_driver = {
	.ops = &usb_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_USB_18_0, /* OHCI-USB1, OHCI-USB2, OHCI-USB3 */
};

static const struct pci_driver usb_ehci123_driver __pci_driver = {
	.ops = &usb_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_USB_18_2, /* EHCI-USB1, EHCI-USB2, EHCI-USB3 */
};

static const struct pci_driver usb_ohci4_driver __pci_driver = {
	.ops = &usb_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_USB_20_5, /* OHCI-USB4 */
};

static struct device_operations azalia_ops = {
	.read_resources = pci_dev_read_resources,
	.set_resources = pci_dev_set_resources,
	.enable_resources = pci_dev_enable_resources,
	.ops_pci = &pci_dev_ops_pci,
};

static const struct pci_driver azalia_driver __pci_driver = {
	.ops = &azalia_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_HDA,
};

static struct device_operations gec_ops = {
	.read_resources = pci_dev_read_resources,
	.set_resources = pci_dev_set_resources,
	.enable_resources = pci_dev_enable_resources,
	.ops_pci = &pci_dev_ops_pci,
};

static const struct pci_driver gec_driver __pci_driver = {
	.ops = &gec_ops,
	.vendor = PCI_VID_ATI,
	.device = PCI_DID_ATI_SB800_GEC,
};

/**
 *  Fill build time defaults.
 */
static void sb800_init(void *chip_info)
{
	printk(BIOS_DEBUG, "SB800: %s\n", __func__);
	sb_config->StdHeader.CALLBACK.CalloutPtr = sb800_callout_entry;
	sb800_cimx_config(sb_config);

	/* Initially enable all GPP ports 0 to 3 */
	abcfg_reg(0xc0, 0x01FF, 0x0F4);
}

/**
 * South Bridge CIMx ramstage entry point wrapper.
 */
void sb_Before_Pci_Init(void)
{
	printk(BIOS_DEBUG, "SB800: %s\n", __func__);
	sb_config->StdHeader.Func = SB_BEFORE_PCI_INIT;
	AmdSbDispatcher(sb_config);
}

void sb_After_Pci_Init(void)
{
	printk(BIOS_DEBUG, "SB800: %s\n", __func__);
	sb_config->StdHeader.Func = SB_AFTER_PCI_INIT;
	AmdSbDispatcher(sb_config);
}

void sb_Mid_Post_Init(void)
{
	printk(BIOS_DEBUG, "SB800: %s\n", __func__);
	sb_config->StdHeader.Func = SB_MID_POST_INIT;
	AmdSbDispatcher(sb_config);
}

void sb_Late_Post(void)
{
	printk(BIOS_DEBUG, "SB800: %s\n", __func__);
	sb_config->StdHeader.Func = SB_LATE_POST_INIT;
	AmdSbDispatcher(sb_config);
}

void sb_Before_Pci_Restore_Init(void)
{
	printk(BIOS_DEBUG, "SB800: %s\n", __func__);
	sb_config->StdHeader.Func = SB_BEFORE_PCI_RESTORE_INIT;
	AmdSbDispatcher(sb_config);
}

void sb_After_Pci_Restore_Init(void)
{
	printk(BIOS_DEBUG, "SB800: %s\n", __func__);
	sb_config->StdHeader.Func = SB_AFTER_PCI_RESTORE_INIT;
	AmdSbDispatcher(sb_config);
}

/*
 * Update the PCI devices with a valid IRQ number
 * that is set in the mainboard PCI_IRQ structures.
 */
static void set_pci_irqs(void *unused)
{
	/* Write PCI_INTR regs 0xC00/0xC01 */
	write_pci_int_table();

	/* Write IRQs for all devicetree enabled devices */
	write_pci_cfg_irqs();
}

/*
 * Hook this function into the PCI state machine
 * on entry into BS_DEV_ENABLE.
 */
BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, set_pci_irqs, NULL);

/**
 * @brief SB Cimx entry point sbBeforePciInit wrapper
 */
static void sb800_enable(struct device *dev)
{
	struct southbridge_amd_cimx_sb800_config *sb_chip =
		(struct southbridge_amd_cimx_sb800_config *)(dev->chip_info);

	switch (dev->path.pci.devfn) {
	case PCI_DEVFN(0x11, 0): /* 0:11.0  SATA */
		if (dev->enabled) {
			sb_config->SATAMODE.SataMode.SataController = CIMX_OPTION_ENABLED;
			if (sb_chip->boot_switch_sata_ide == 1)
				sb_config->SATAMODE.SataMode.SataIdeCombMdPriSecOpt = 0; //0 -IDE as primary.
			else if (sb_chip->boot_switch_sata_ide == 0)
				sb_config->SATAMODE.SataMode.SataIdeCombMdPriSecOpt = 1; //1 -IDE as secondary.
		} else {
			sb_config->SATAMODE.SataMode.SataController = CIMX_OPTION_DISABLED;
		}
		break;

	case PCI_DEVFN(0x14, 0): /* 0:14:0 SMBUS */
		/* Assign the ioapic ID the next available number after the processor core local APIC IDs */
		setup_ioapic(VIO_APIC_VADDR, CONFIG_MAX_CPUS);
		break;

	case PCI_DEVFN(0x14, 1): /* 0:14:1 IDE */
		break;

	case PCI_DEVFN(0x14, 2): /* 0:14:2 HDA */
		if (dev->enabled) {
			if (sb_config->AzaliaController == AZALIA_DISABLE) {
				sb_config->AzaliaController = AZALIA_AUTO;
			}
		} else {
			sb_config->AzaliaController = AZALIA_DISABLE;
		}
		break;

	case PCI_DEVFN(0x14, 3): /* 0:14:3 LPC */
		/* Initialize the fans */
#if CONFIG(SB800_IMC_FAN_CONTROL)
		init_sb800_IMC_fans(dev);
#elif CONFIG(SB800_MANUAL_FAN_CONTROL)
		init_sb800_MANUAL_fans(dev);
#endif
		break;

	case PCI_DEVFN(0x14, 4): /* 0:14:4 PCI */
		/* PcibConfig [PM_Reg: EAh], PCIDisable [Bit0]
		 * 'PCIDisable' set to 0 to enable P2P bridge.
		 * 'PCIDisable' set to 1 to disable P2P bridge and enable PCI interface pins
		 *              to function as GPIO {GPIO 35:0}.
		 */
		if (!sb_chip->disconnect_pcib && dev->enabled)
			pm_write8(0xea, pm_read8(0xea) & 0xfe);
		else
			pm_write8(0xea, (pm_read8(0xea) & 0xfe) | 1);
		break;

	case PCI_DEVFN(0x14, 6): /* 0:14:6 GEC */
		if (dev->enabled) {
			sb_config->GecConfig = 0;
		} else {
			sb_config->GecConfig = 1;
		}
		break;

	case PCI_DEVFN(0x15, 0): /* 0:15:0 PCIe PortA */
		{
			struct device *device;
			for (device = dev; device; device = device->sibling) {
				if ((device->path.pci.devfn & ~3) != PCI_DEVFN(0x15,0)) break;
				sb_config->PORTCONFIG[device->path.pci.devfn & 3].PortCfg.PortPresent = device->enabled;
			}

			/*
			 * GPP_CFGMODE_X4000: PortA Lanes[3:0]
			 * GPP_CFGMODE_X2200: PortA Lanes[1:0], PortB Lanes[3:2]
			 * GPP_CFGMODE_X2110: PortA Lanes[1:0], PortB Lane2, PortC Lane3
			 * GPP_CFGMODE_X1111: PortA Lanes0, PortB Lane1, PortC Lane2, PortD Lane3
			 */
			sb_config->GppLinkConfig = sb_chip->gpp_configuration;
		}
		break;

	case PCI_DEVFN(0x12, 0): /* 0:12:0 OHCI-USB1 */
		sb_config->USBMODE.UsbMode.Ohci1 = dev->enabled;
		break;
	case PCI_DEVFN(0x12, 2): /* 0:12:2 EHCI-USB1 */
		sb_config->USBMODE.UsbMode.Ehci1 = dev->enabled;
		break;
	case PCI_DEVFN(0x13, 0): /* 0:13:0 OHCI-USB2 */
		sb_config->USBMODE.UsbMode.Ohci2 = dev->enabled;
		break;
	case PCI_DEVFN(0x13, 2): /* 0:13:2 EHCI-USB2 */
		sb_config->USBMODE.UsbMode.Ehci2 = dev->enabled;
		break;
	case PCI_DEVFN(0x14, 5): /* 0:14:5 OHCI-USB4 */
		sb_config->USBMODE.UsbMode.Ohci4 = dev->enabled;
		break;
	case PCI_DEVFN(0x16, 0): /* 0:16:0 OHCI-USB3 */
		sb_config->USBMODE.UsbMode.Ohci3 = dev->enabled;
		break;
	case PCI_DEVFN(0x16, 2): /* 0:16:2 EHCI-USB3 */
		sb_config->USBMODE.UsbMode.Ehci3 = dev->enabled;

		/* FIXME: Find better callsites for these.
		 * call the CIMX entry at the last sb800 device,
		 * so make sure the mainboard devicetree is complete
		 */
		if (!acpi_is_wakeup_s3())
			sb_Before_Pci_Init();
		else
			sb_Before_Pci_Restore_Init();
		break;

	default:
		break;
	}
}

struct chip_operations southbridge_amd_cimx_sb800_ops = {
	CHIP_NAME("ATI SB800")
	.init = sb800_init,
	.enable_dev = sb800_enable,
};