1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
|
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <device/smbus.h>
#include <pc80/mc146818rtc.h>
#include <bitops.h>
#include <arch/io.h>
#include "amd8111.h"
#include "amd8111_smbus.h"
#define PREVIOUS_POWER_STATE 0x43
#define MAINBOARD_POWER_OFF 0
#define MAINBOARD_POWER_ON 1
#define SLOW_CPU_OFF 0
#define SLOW_CPU__ON 1
#ifndef MAINBOARD_POWER_ON_AFTER_POWER_FAIL
#define MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
#endif
static int lsmbus_recv_byte(device_t dev)
{
unsigned device;
struct resource *res;
device = dev->path.i2c.device;
res = find_resource(get_pbus_smbus(dev)->dev, 0x58);
return do_smbus_recv_byte(res->base, device);
}
static int lsmbus_send_byte(device_t dev, uint8_t val)
{
unsigned device;
struct resource *res;
device = dev->path.i2c.device;
res = find_resource(get_pbus_smbus(dev)->dev, 0x58);
return do_smbus_send_byte(res->base, device, val);
}
static int lsmbus_read_byte(device_t dev, uint8_t address)
{
unsigned device;
struct resource *res;
device = dev->path.i2c.device;
res = find_resource(get_pbus_smbus(dev)->dev, 0x58);
return do_smbus_read_byte(res->base, device, address);
}
static int lsmbus_write_byte(device_t dev, uint8_t address, uint8_t val)
{
unsigned device;
struct resource *res;
device = dev->path.i2c.device;
res = find_resource(get_pbus_smbus(dev)->dev, 0x58);
return do_smbus_write_byte(res->base, device, address, val);
}
#if HAVE_ACPI_TABLES == 1
unsigned pm_base;
#endif
static void acpi_init(struct device *dev)
{
uint8_t byte;
uint16_t word;
uint16_t pm10_bar;
uint32_t dword;
int on;
#if 0
printk_debug("ACPI: disabling NMI watchdog.. ");
byte = pci_read_config8(dev, 0x49);
pci_write_config8(dev, 0x49, byte | (1<<2));
byte = pci_read_config8(dev, 0x41);
pci_write_config8(dev, 0x41, byte | (1<<6)|(1<<2));
/* added from sourceforge */
byte = pci_read_config8(dev, 0x48);
pci_write_config8(dev, 0x48, byte | (1<<3));
printk_debug("done.\n");
printk_debug("ACPI: Routing IRQ 12 to PS2 port.. ");
word = pci_read_config16(dev, 0x46);
pci_write_config16(dev, 0x46, word | (1<<9));
printk_debug("done.\n");
#endif
/* To enable the register 0xcf9 in the IO space
* bit [D5] is set in the amd8111 configuration register.
* The config. reg. is devBx41. Register 0xcf9 allows
* hard reset capability to the system. For the ACPI
* reset.reg values in fadt.c to work this register
* must be enabled.
*/
byte = pci_read_config8(dev, 0x41);
pci_write_config8(dev, 0x41, byte | (1<<6)|(1<<5));
/* power on after power fail */
on = MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
get_option(&on, "power_on_after_fail");
byte = pci_read_config8(dev, PREVIOUS_POWER_STATE);
byte &= ~0x40;
if (!on) {
byte |= 0x40;
}
pci_write_config8(dev, PREVIOUS_POWER_STATE, byte);
printk_info("set power %s after power fail\n", on?"on":"off");
/* switch serial irq logic from quiet mode to continuous
* mode for Winbond W83627HF Rev. 17
*/
byte = pci_read_config8(dev, 0x4a);
pci_write_config8(dev, 0x4a, byte | (1<<6));
/* Throttle the CPU speed down for testing */
on = SLOW_CPU_OFF;
get_option(&on, "slow_cpu");
if(on) {
pm10_bar = (pci_read_config16(dev, 0x58)&0xff00);
outl(((on<<1)+0x10) ,(pm10_bar + 0x10));
dword = inl(pm10_bar + 0x10);
on = 8-on;
printk_debug("Throttling CPU %2d.%1.1d percent.\n",
(on*12)+(on>>1),(on&1)*5);
}
#if HAVE_ACPI_TABLES == 1
pm_base = pci_read_config16(dev, 0x58) & 0xff00;
printk_debug("pm_base: 0x%04x\n",pm_base);
#endif
}
static void acpi_read_resources(device_t dev)
{
struct resource *resource;
/* Handle the generic bars */
pci_dev_read_resources(dev);
/* Add the ACPI/SMBUS bar */
resource = new_resource(dev, 0x58);
resource->base = 0;
resource->size = 256;
resource->align = log2(256);
resource->gran = log2(256);
resource->limit = 65536;
resource->flags = IORESOURCE_IO;
resource->index = 0x58;
}
static void acpi_enable_resources(device_t dev)
{
uint8_t byte;
/* Enable the generic pci resources */
pci_dev_enable_resources(dev);
/* Enable the ACPI/SMBUS Bar */
byte = pci_read_config8(dev, 0x41);
byte |= (1 << 7);
pci_write_config8(dev, 0x41, byte);
/* Set the class code */
pci_write_config32(dev, 0x60, 0x06800000);
}
static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
pci_write_config32(dev, 0x7c,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
static struct smbus_bus_operations lops_smbus_bus = {
.recv_byte = lsmbus_recv_byte,
.send_byte = lsmbus_send_byte,
.read_byte = lsmbus_read_byte,
.write_byte = lsmbus_write_byte,
};
static struct pci_operations lops_pci = {
.set_subsystem = lpci_set_subsystem,
};
static struct device_operations acpi_ops = {
.read_resources = acpi_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = acpi_enable_resources,
.init = acpi_init,
.scan_bus = scan_static_bus,
/* We don't need amd8111_enable, chip ops takes care of it.
* It could be useful if these devices were not
* enabled by default.
*/
// .enable = amd8111_enable,
.ops_pci = &lops_pci,
.ops_smbus_bus = &lops_smbus_bus,
};
static const struct pci_driver acpi_driver __pci_driver = {
.ops = &acpi_ops,
.vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_8111_ACPI,
};
|
