1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdint.h>
#include <stdlib.h>
#include <device/mmio.h>
#include <console/console.h>
#include <spi_flash.h>
#include <spi-generic.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <Proc/Fch/FchPlatform.h>
#define SPI_REG_OPCODE 0x0
#define SPI_REG_CNTRL01 0x1
#define SPI_REG_CNTRL02 0x2
#define CNTRL02_FIFO_RESET (1 << 4)
#define CNTRL02_EXEC_OPCODE (1 << 0)
#define SPI_REG_CNTRL03 0x3
#define CNTRL03_SPIBUSY (1 << 7)
#define SPI_REG_FIFO 0xc
#define SPI_REG_CNTRL11 0xd
#define CNTRL11_FIFOPTR_MASK 0x07
#if CONFIG(SOUTHBRIDGE_AMD_AGESA_YANGTZE)
#define AMD_SB_SPI_TX_LEN 64
#else
#define AMD_SB_SPI_TX_LEN 8
#endif
static uintptr_t spibar;
static inline uint8_t spi_read(uint8_t reg)
{
return read8((void *)(spibar + reg));
}
static inline void spi_write(uint8_t reg, uint8_t val)
{
write8((void *)(spibar + reg), val);
}
static void reset_internal_fifo_pointer(void)
{
uint8_t reg8;
do {
reg8 = spi_read(SPI_REG_CNTRL02);
reg8 |= CNTRL02_FIFO_RESET;
spi_write(SPI_REG_CNTRL02, reg8);
} while (spi_read(SPI_REG_CNTRL11) & CNTRL11_FIFOPTR_MASK);
}
static void execute_command(void)
{
uint8_t reg8;
reg8 = spi_read(SPI_REG_CNTRL02);
reg8 |= CNTRL02_EXEC_OPCODE;
spi_write(SPI_REG_CNTRL02, reg8);
while ((spi_read(SPI_REG_CNTRL02) & CNTRL02_EXEC_OPCODE) &&
(spi_read(SPI_REG_CNTRL03) & CNTRL03_SPIBUSY));
}
void spi_init(void)
{
struct device *dev;
dev = pcidev_on_root(0x14, 3);
spibar = pci_read_config32(dev, 0xA0) & ~0x1F;
}
static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
size_t bytesout, void *din, size_t bytesin)
{
/* First byte is cmd which can not be sent through FIFO. */
u8 cmd = *(u8 *)dout++;
u8 readoffby1;
size_t count;
bytesout--;
/*
* Check if this is a write command attempting to transfer more bytes
* than the controller can handle. Iterations for writes are not
* supported here because each SPI write command needs to be preceded
* and followed by other SPI commands, and this sequence is controlled
* by the SPI chip driver.
*/
if (bytesout > AMD_SB_SPI_TX_LEN) {
printk(BIOS_DEBUG, "FCH SPI: Too much to write. Does your SPI chip driver use"
" spi_crop_chunk()?\n");
return -1;
}
readoffby1 = bytesout ? 0 : 1;
#if CONFIG(SOUTHBRIDGE_AMD_AGESA_YANGTZE)
spi_write(0x1E, 5);
spi_write(0x1F, bytesout); /* SpiExtRegIndx [5] - TxByteCount */
spi_write(0x1E, 6);
spi_write(0x1F, bytesin); /* SpiExtRegIndx [6] - RxByteCount */
#else
u8 readwrite = (bytesin + readoffby1) << 4 | bytesout;
spi_write(SPI_REG_CNTRL01, readwrite);
#endif
spi_write(SPI_REG_OPCODE, cmd);
reset_internal_fifo_pointer();
for (count = 0; count < bytesout; count++, dout++) {
spi_write(SPI_REG_FIFO, *(uint8_t *)dout);
}
reset_internal_fifo_pointer();
execute_command();
reset_internal_fifo_pointer();
/* Skip the bytes we sent. */
for (count = 0; count < bytesout; count++) {
spi_read(SPI_REG_FIFO);
}
for (count = 0; count < bytesin; count++, din++) {
*(uint8_t *)din = spi_read(SPI_REG_FIFO);
}
return 0;
}
int chipset_volatile_group_begin(const struct spi_flash *flash)
{
if (!CONFIG(HUDSON_IMC_FWM))
return 0;
ImcSleep(NULL);
return 0;
}
int chipset_volatile_group_end(const struct spi_flash *flash)
{
if (!CONFIG(HUDSON_IMC_FWM))
return 0;
ImcWakeup(NULL);
return 0;
}
static int xfer_vectors(const struct spi_slave *slave,
struct spi_op vectors[], size_t count)
{
return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer);
}
static const struct spi_ctrlr spi_ctrlr = {
.xfer_vector = xfer_vectors,
.max_xfer_size = AMD_SB_SPI_TX_LEN,
.flags = SPI_CNTRLR_DEDUCT_CMD_LEN,
};
const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
{
.ctrlr = &spi_ctrlr,
.bus_start = 0,
.bus_end = 0,
},
};
const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
|
