1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef _HUDSON_EARLY_SETUP_C_
#define _HUDSON_EARLY_SETUP_C_
#include <stdint.h>
#include <amdblocks/acpimmio.h>
#include <device/pci_ops.h>
#include <console/console.h>
#include "hudson.h"
void hudson_pci_port80(void)
{
u8 byte;
pci_devfn_t dev;
/* P2P Bridge */
dev = PCI_DEV(0, 0x14, 4);
/* Chip Control: Enable subtractive decoding */
byte = pci_read_config8(dev, 0x40);
byte |= 1 << 5;
pci_write_config8(dev, 0x40, byte);
/* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */
byte = pci_read_config8(dev, 0x4B);
byte |= 1 << 7;
pci_write_config8(dev, 0x4B, byte);
/* The same IO Base and IO Limit here is meaningful because we set the
* bridge to be subtractive. During early setup stage, we have to make
* sure that data can go through port 0x80.
*/
/* IO Base: 0xf000 */
byte = pci_read_config8(dev, 0x1C);
byte |= 0xF << 4;
pci_write_config8(dev, 0x1C, byte);
/* IO Limit: 0xf000 */
byte = pci_read_config8(dev, 0x1D);
byte |= 0xF << 4;
pci_write_config8(dev, 0x1D, byte);
/* PCI Command: Enable IO response */
byte = pci_read_config8(dev, 0x04);
byte |= 1 << 0;
pci_write_config8(dev, 0x04, byte);
/* LPC controller */
dev = PCI_DEV(0, 0x14, 3);
byte = pci_read_config8(dev, 0x4A);
byte &= ~(1 << 5); /* disable lpc port 80 */
pci_write_config8(dev, 0x4A, byte);
}
void hudson_lpc_port80(void)
{
u8 byte;
/* Enable port 80 LPC decode in pci function 3 configuration space. */
const pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
byte = pci_read_config8(dev, 0x4a);
byte |= 1 << 5; /* enable port 80 */
pci_write_config8(dev, 0x4a, byte);
}
void hudson_lpc_decode(void)
{
u32 tmp;
/* Enable LPC controller */
pm_write8(0xec, pm_read8(0xec) | 0x01);
const pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
/* Serial port enumeration on Hudson:
* PORT0 - 0x3f8
* PORT1 - 0x2f8
* PORT5 - 0x2e8
* PORT7 - 0x3e8
*/
tmp = DECODE_ENABLE_SERIAL_PORT0 | DECODE_ENABLE_SERIAL_PORT1
| DECODE_ENABLE_SERIAL_PORT5 | DECODE_ENABLE_SERIAL_PORT7;
pci_write_config32(dev, LPC_IO_PORT_DECODE_ENABLE, tmp);
}
#endif /* _HUDSON_EARLY_SETUP_C_ */
|
