1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
|
/*
* This file is part of the coreboot project.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/cache.h>
#include <console/console.h>
#include <device/mmio.h>
#include <device/device.h>
#include <ec/google/chromeec/ec.h>
#include <soc/dp.h>
#include <soc/fimd.h>
#include <soc/cpu.h>
#include <soc/clk.h>
#include <stddef.h>
#include <string.h>
#include "chip.h"
static unsigned int cpu_id;
static unsigned int cpu_rev;
static void set_cpu_id(void)
{
u32 pro_id = (read32((void *)EXYNOS5_PRO_ID) & 0x00FFF000) >> 12;
switch (pro_id) {
case 0x200:
/* Exynos4210 EVT0 */
cpu_id = 0x4210;
cpu_rev = 0;
break;
case 0x210:
/* Exynos4210 EVT1 */
cpu_id = 0x4210;
break;
case 0x412:
/* Exynos4412 */
cpu_id = 0x4412;
break;
case 0x520:
/* Exynos5250 */
cpu_id = 0x5250;
break;
case 0x420:
/* Exynos5420 */
cpu_id = 0x5420;
break;
}
}
/* we distinguish a display port device from a raw graphics device
* because there are dramatic differences in startup depending on
* graphics usage. To make startup fast and easier to understand and
* debug we explicitly name this common case. The alternate approach,
* involving lots of machine and callbacks, is hard to debug and
* verify.
*/
static void exynos_displayport_init(struct device *dev, u32 lcdbase,
unsigned long fb_size)
{
struct soc_samsung_exynos5420_config *conf = dev->chip_info;
/* put these on the stack. If, at some point, we want to move
* this code to a pre-ram stage, it will be much easier.
*/
struct exynos5_fimd_panel panel;
memset(&panel, 0, sizeof(panel));
panel.is_dp = 1; /* Display I/F is eDP */
/* while it is true that we did a memset to zero,
* we leave some 'set to zero' entries here to make
* it clear what's going on. Graphics is confusing.
*/
panel.is_mipi = 0;
panel.fixvclk = 0;
panel.ivclk = 0;
panel.clkval_f = conf->clkval_f;
panel.upper_margin = conf->upper_margin;
panel.lower_margin = conf->lower_margin;
panel.vsync = conf->vsync;
panel.left_margin = conf->left_margin;
panel.right_margin = conf->right_margin;
panel.hsync = conf->hsync;
panel.xres = conf->xres;
panel.yres = conf->yres;
printk(BIOS_SPEW, "LCD framebuffer @%p\n", (void *)(lcdbase));
memset((void *)lcdbase, 0, fb_size); /* clear the framebuffer */
/*
* We need to clean and invalidate the framebuffer region and disable
* caching as well. We assume that our dcache <--> memory address
* space is identity-mapped in 1MB chunks, so align accordingly.
*
* Note: We may want to do something clever to ensure the framebuffer
* region is aligned such that we don't change dcache policy for other
* stuff inadvertently.
*/
uint32_t lower = ALIGN_DOWN(lcdbase, MiB);
uint32_t upper = ALIGN_UP(lcdbase + fb_size, MiB);
dcache_clean_invalidate_by_mva((void *)lower, upper - lower);
mmu_config_range(lower / MiB, (upper - lower) / MiB, DCACHE_OFF);
mmio_resource(dev, 1, lcdbase/KiB, DIV_ROUND_UP(fb_size, KiB));
}
static void tps65090_thru_ec_fet_disable(int index)
{
uint8_t value = 0;
if (google_chromeec_i2c_xfer(0x48, 0xe + index, 1, &value, 1, 0)) {
printk(BIOS_ERR,
"Error sending i2c pass through command to EC.\n");
return;
}
}
static void cpu_enable(struct device *dev)
{
unsigned long fb_size = FB_SIZE_KB * KiB;
u32 lcdbase = get_fb_base_kb() * KiB;
ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB - FB_SIZE_KB);
mmio_resource(dev, 1, lcdbase / KiB, DIV_ROUND_UP(fb_size, KiB));
/*
* Disable LCD FETs before we do anything with the display.
* FIXME(dhendrix): This is a gross hack and should be done
* elsewhere (romstage?).
*/
tps65090_thru_ec_fet_disable(1);
tps65090_thru_ec_fet_disable(6);
exynos_displayport_init(dev, lcdbase, fb_size);
set_cpu_id();
}
static void cpu_init(struct device *dev)
{
printk(BIOS_INFO, "CPU: S5P%X @ %ldMHz\n",
cpu_id, get_arm_clk() / 1000000);
}
static struct device_operations cpu_ops = {
.read_resources = DEVICE_NOOP,
.set_resources = DEVICE_NOOP,
.enable_resources = cpu_enable,
.init = cpu_init,
.scan_bus = 0,
};
static void enable_exynos5420_dev(struct device *dev)
{
dev->ops = &cpu_ops;
}
struct chip_operations soc_samsung_exynos5420_ops = {
CHIP_NAME("SOC Samsung Exynos 5420")
.enable_dev = enable_exynos5420_dev,
};
|
