1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
/*
* This file is part of the coreboot project.
*
* Copyright 2014 Rockchip Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.
*/
#include <arch/cache.h>
#include <arch/io.h>
#include <console/console.h>
#include <device/device.h>
#include <delay.h>
#include <edid.h>
#include <gpio.h>
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <soc/addressmap.h>
#include <soc/clock.h>
#include <soc/display.h>
#include <soc/edp.h>
#include <soc/hdmi.h>
#include <soc/gpio.h>
#include <soc/grf.h>
#include <soc/soc.h>
#include <soc/vop.h>
#include "chip.h"
void rk_display_init(device_t dev, u32 lcdbase,
unsigned long fb_size)
{
struct edid edid;
struct soc_rockchip_rk3288_config *conf = dev->chip_info;
uint32_t lower = ALIGN_DOWN(lcdbase, MiB);
uint32_t upper = ALIGN_UP(lcdbase + fb_size, MiB);
printk(BIOS_SPEW, "LCD framebuffer @%p\n", (void *)(lcdbase));
memset((void *)lcdbase, 0, fb_size); /* clear the framebuffer */
dcache_clean_invalidate_by_mva((void *)lower, upper - lower);
mmu_config_range(lower / MiB, (upper - lower) / MiB, DCACHE_OFF);
switch (conf->vop_mode) {
case HDMI_MODE:
rkclk_configure_hdmi();
rkclk_configure_vop_aclk(conf->vop_id, 384 * MHz);
rk_hdmi_init(conf->vop_id);
if (rk_hdmi_get_edid(&edid)) {
printk(BIOS_WARNING, "can not get edid\n");
return;
}
break;
case EDP_MODE:
default:
rkclk_configure_edp();
rkclk_configure_vop_aclk(conf->vop_id, 192 * MHz);
rk_edp_init(conf->vop_id);
if (rk_edp_get_edid(&edid)) {
printk(BIOS_WARNING, "can not get edid\n");
return;
}
break;
}
if (rkclk_configure_vop_dclk(conf->vop_id, edid.pixel_clock * KHz)) {
printk(BIOS_WARNING, "config vop err\n");
return;
}
edid.framebuffer_bits_per_pixel = conf->framebuffer_bits_per_pixel;
edid.bytes_per_line = edid.ha * conf->framebuffer_bits_per_pixel / 8;
edid.x_resolution = edid.ha;
edid.y_resolution = edid.va;
rkvop_mode_set(conf->vop_id, &edid, conf->vop_mode);
rkvop_enable(conf->vop_id, lcdbase, &edid);
switch (conf->vop_mode) {
case HDMI_MODE:
if (rk_hdmi_enable(&edid)) {
printk(BIOS_WARNING, "hdmi enable err\n");
return;
}
/*
* HACK: if we do remove this delay, HDMI TV may not show
* anythings. So we make an delay here, ensure TV have
* enough time to respond.
*/
mdelay(2000);
break;
case EDP_MODE:
default:
if (rk_edp_enable()) {
printk(BIOS_WARNING, "edp enable err\n");
return;
}
mainboard_power_on_backlight();
break;
}
set_vbe_mode_info_valid(&edid, (uintptr_t)lcdbase);
}
|
