1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
|
/*
* This file is part of the coreboot project.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/mmio.h>
#include <console/console.h>
#include <delay.h>
#include <soc/clock.h>
#include <soc/iomap.h>
#include <soc/usb.h>
#define CRPORT_TX_OVRD_DRV_LO 0x1002
#define CRPORT_RX_OVRD_IN_HI 0x1006
#define CRPORT_TX_ALT_BLOCK 0x102d
static u32 *const tcsr_usb_sel = (void *)0x1a4000b0;
struct usb_qc_phy {
u32 ipcat;
u32 ctrl;
u32 general_cfg;
u32 ram1;
u32 hs_phy_ctrl;
u32 param_ovrd;
u32 chrg_det_ctrl;
u32 chrg_det_output;
u32 alt_irq_en;
u32 hs_phy_irq_stat;
u32 cgctl;
u32 dbg_bus;
u32 ss_phy_ctrl;
u32 ss_phy_param1;
u32 ss_phy_param2;
u32 crport_data_in;
u32 crport_data_out;
u32 crport_cap_addr;
u32 crport_cap_data;
u32 crport_ack_read;
u32 crport_ack_write;
};
check_member(usb_qc_phy, crport_ack_write, 0x50);
static struct usb_qc_phy * const usb_host1_phy = (void *)USB_HOST1_PHY_BASE;
static struct usb_qc_phy * const usb_host2_phy = (void *)USB_HOST2_PHY_BASE;
struct usb_dwc3 {
u32 sbuscfg0;
u32 sbuscfg1;
u32 txthrcfg;
u32 rxthrcfg;
u32 ctl;
u32 evten;
u32 sts;
u8 reserved0[4];
u32 snpsid;
u32 gpio;
u32 uid;
u32 uctl;
u64 buserraddr;
u64 prtbimap;
u8 reserved1[32];
u32 dbgfifospace;
u32 dbgltssm;
u32 dbglnmcc;
u32 dbgbmu;
u32 dbglspmux;
u32 dbglsp;
u32 dbgepinfo0;
u32 dbgepinfo1;
u64 prtbimap_hs;
u64 prtbimap_fs;
u8 reserved2[112];
u32 usb2phycfg;
u8 reserved3[60];
u32 usb2i2cctl;
u8 reserved4[60];
u32 usb2phyacc;
u8 reserved5[60];
u32 usb3pipectl;
u8 reserved6[60];
};
check_member(usb_dwc3, usb3pipectl, 0x1c0);
static struct usb_dwc3 * const usb_host1_dwc3 = (void *)USB_HOST1_DWC3_BASE;
static struct usb_dwc3 * const usb_host2_dwc3 = (void *)USB_HOST2_DWC3_BASE;
static void setup_dwc3(struct usb_dwc3 *dwc3)
{
write32(&dwc3->usb3pipectl,
0x1 << 31 | /* assert PHY soft reset */
0x1 << 25 | /* (default) U1/U2 exit fail -> recovery? */
0x1 << 24 | /* (default) activate PHY low power states */
0x1 << 19 | /* (default) PHY low power delay value */
0x1 << 18 | /* (default) activate PHY low power delay */
0x1 << 1 | /* (default) Tx deemphasis value */
0x1 << 0); /* (default) elastic buffer mode */
write32(&dwc3->usb2phycfg,
0x1 << 31 | /* assert PHY soft reset */
0x9 << 10 | /* (default) PHY clock turnaround 8-bit UTMI+ */
0x1 << 8 | /* (default) enable PHY sleep in L1 */
0x1 << 6); /* (default) enable PHY suspend */
write32(&dwc3->ctl,
0x2 << 19 | /* (default) suspend clock scaling */
0x1 << 16 | /* retry SS three times before HS downgrade */
0x1 << 12 | /* port capability HOST */
0x1 << 11 | /* assert core soft reset */
0x1 << 10 | /* (default) sync ITP to refclk */
0x1 << 2); /* U2 exit after 8us LFPS (instead of 248ns) */
write32(&dwc3->uctl,
0x32 << 22 | /* (default) reference clock period in ns */
0x1 << 15 | /* (default) XHCI compliant device addressing */
0x10 << 0); /* (default) devices time out after 32us */
udelay(5);
clrbits32(&dwc3->ctl, 0x1 << 11); /* deassert core soft reset */
clrbits32(&dwc3->usb2phycfg, 0x1 << 31); /* PHY soft reset */
clrbits32(&dwc3->usb3pipectl, 0x1 << 31); /* PHY soft reset */
}
static void setup_phy(struct usb_qc_phy *phy)
{
write32(&phy->ss_phy_ctrl,
0x1 << 24 | /* Indicate VBUS power present */
0x1 << 8 | /* Enable USB3 ref clock to prescaler */
0x1 << 7 | /* assert SS PHY reset */
0x19 << 0); /* (default) reference clock multiplier */
write32(&phy->hs_phy_ctrl,
0x1 << 26 | /* (default) unclamp DPSE/DMSE VLS */
0x1 << 25 | /* (default) select freeclk for utmi_clk */
0x1 << 24 | /* (default) unclamp DMSE VLS */
0x1 << 21 | /* (default) enable UTMI clock */
0x1 << 20 | /* set OTG VBUS as valid */
0x1 << 18 | /* use ref clock from core */
0x1 << 17 | /* (default) unclamp DPSE VLS */
0x1 << 11 | /* force xo/bias/pll to stay on in suspend */
0x1 << 9 | /* (default) unclamp IDHV */
0x1 << 8 | /* (default) unclamp VLS (again???) */
0x1 << 7 | /* (default) unclamp HV VLS */
0x7 << 4 | /* select frequency (no idea which one) */
0x1 << 1); /* (default) "retention enable" */
write32(&phy->ss_phy_param1,
0x6e << 20 | /* full TX swing amplitude */
0x20 << 14 | /* (default) 6dB TX deemphasis */
0x17 << 8 | /* 3.5dB TX deemphasis */
0x9 << 3); /* (default) LoS detector level */
write32(&phy->general_cfg, 0x1 << 2); /* set XHCI 1.00 compliance */
udelay(5);
clrbits32(&phy->ss_phy_ctrl, 0x1 << 7); /* deassert SS PHY reset */
}
static void crport_handshake(void *capture_reg, void *acknowledge_bit, u32 data)
{
int usec = 100;
if (capture_reg)
write32(capture_reg, data);
write32(acknowledge_bit, 0x1 << 0);
while (read32(acknowledge_bit) && --usec)
udelay(1);
if (!usec)
printk(BIOS_ERR, "CRPORT handshake timed out (0x%08x)\n", data);
}
static void crport_write(struct usb_qc_phy *phy, u16 addr, u16 data)
{
crport_handshake(&phy->crport_data_in, &phy->crport_cap_addr, addr);
crport_handshake(&phy->crport_data_in, &phy->crport_cap_data, data);
crport_handshake(NULL, &phy->crport_ack_write, 0);
}
static void tune_phy(struct usb_qc_phy *phy)
{
crport_write(phy, CRPORT_RX_OVRD_IN_HI,
0x1 << 11 | /* Set RX_EQ override? */
0x4 << 8 | /* Set RX_EQ to 4? */
0x1 << 7); /* Enable RX_EQ override */
crport_write(phy, CRPORT_TX_OVRD_DRV_LO,
0x1 << 14 | /* Enable amplitude (override?) */
0x17 << 7 | /* Set TX deemphasis to 23 */
0x6e << 0); /* Set amplitude to 110 */
crport_write(phy, CRPORT_TX_ALT_BLOCK,
0x1 << 7); /* ALT block? ("partial RX reset") */
}
void setup_usb_host1(void)
{
printk(BIOS_INFO, "Setting up USB HOST1 controller...\n");
setbits32(tcsr_usb_sel, 1 << 0); /* Select DWC3 controller */
setup_phy(usb_host1_phy);
setup_dwc3(usb_host1_dwc3);
tune_phy(usb_host1_phy);
}
void setup_usb_host2(void)
{
printk(BIOS_INFO, "Setting up USB HOST2 controller...\n");
setbits32(tcsr_usb_sel, 1 << 1); /* Select DWC3 controller */
setup_phy(usb_host2_phy);
setup_dwc3(usb_host2_dwc3);
tune_phy(usb_host2_phy);
}
|
