1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bootstate.h>
#include <console/console.h>
#include <device/mmio.h>
#include <device/device.h>
#include <device/pci_ops.h>
#include <intelblocks/pmc.h>
#include <intelblocks/pmclib.h>
#include <intelblocks/rtc.h>
#include <reg_script.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include "chip.h"
void pmc_set_disb(void)
{
/* Set the DISB after DRAM init */
u32 disb_val;
#if defined(__SIMPLE_DEVICE__)
pci_devfn_t dev = PCH_DEV_PMC;
#else
struct device *dev = PCH_DEV_PMC;
#endif
disb_val = pci_read_config32(dev, GEN_PMCON_A);
disb_val |= DISB;
/* Don't clear bits that are write-1-to-clear */
disb_val &= ~(GBL_RST_STS | MS4V);
pci_write_config32(dev, GEN_PMCON_A, disb_val);
}
/*
* Set which power state system will be after reapplying
* the power (from G3 State)
*/
void pmc_soc_set_afterg3_en(const bool on)
{
uint8_t reg8;
#if defined(__SIMPLE_DEVICE__)
const pci_devfn_t dev = PCH_DEV_PMC;
#else
const struct device *const dev = PCH_DEV_PMC;
#endif
reg8 = pci_read_config8(dev, GEN_PMCON_B);
if (on)
reg8 &= ~SLEEP_AFTER_POWER_FAIL;
else
reg8 |= SLEEP_AFTER_POWER_FAIL;
pci_write_config8(dev, GEN_PMCON_B, reg8);
}
#if ENV_RAMSTAGE
/* Fill up PMC resource structure */
int pmc_soc_get_resources(struct pmc_resource_config *cfg)
{
cfg->pwrmbase_offset = PWRMBASE;
cfg->pwrmbase_addr = PCH_PWRM_BASE_ADDRESS;
cfg->pwrmbase_size = PCH_PWRM_BASE_SIZE;
cfg->abase_offset = ABASE;
cfg->abase_addr = ACPI_BASE_ADDRESS;
cfg->abase_size = ACPI_BASE_SIZE;
return 0;
}
static const struct reg_script pch_pmc_misc_init_script[] = {
/* SLP_S4=4s, SLP_S3=50ms, disable SLP_X stretching after SUS loss. */
REG_PCI_RMW16(GEN_PMCON_B,
~(S4MAW_MASK | SLP_S3_MIN_ASST_WDTH_MASK),
S4MAW_4S | SLP_S3_MIN_ASST_WDTH_50MS |
DIS_SLP_X_STRCH_SUS_UP),
/* Enable SCI and clear SLP requests. */
REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN),
REG_SCRIPT_END
};
static const struct reg_script pmc_write1_to_clear_script[] = {
REG_PCI_OR32(GEN_PMCON_A, 0),
REG_PCI_OR32(GEN_PMCON_B, 0),
REG_PCI_OR32(GEN_PMCON_B, 0),
REG_RES_OR32(PWRMBASE, GBLRST_CAUSE0, 0),
REG_RES_OR32(PWRMBASE, GBLRST_CAUSE1, 0),
REG_SCRIPT_END
};
static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
{
uint32_t reg;
uint8_t *pmcbase = pmc_mmio_regs();
printk(BIOS_DEBUG, "%sabling Deep S%c\n",
enable ? "En" : "Dis", sx + '0');
reg = read32(pmcbase + offset);
if (enable)
reg |= mask;
else
reg &= ~mask;
write32(pmcbase + offset, reg);
}
static void config_deep_s5(int on_ac, int on_dc)
{
/* Treat S4 the same as S5. */
config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac);
config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc);
config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac);
config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc);
}
static void config_deep_s3(int on_ac, int on_dc)
{
config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac);
config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc);
}
static void config_deep_sx(uint32_t deepsx_config)
{
uint32_t reg;
uint8_t *pmcbase = pmc_mmio_regs();
reg = read32(pmcbase + DSX_CFG);
reg &= ~DSX_CFG_MASK;
reg |= deepsx_config;
write32(pmcbase + DSX_CFG, reg);
}
void pmc_soc_init(struct device *dev)
{
const config_t *config = config_of(dev);
rtc_init();
pmc_set_power_failure_state(true);
pmc_gpe_init();
/* Note that certain bits may be cleared from running script as
* certain bit fields are write 1 to clear. */
reg_script_run_on_dev(dev, pch_pmc_misc_init_script);
pmc_set_acpi_mode();
config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc);
config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc);
config_deep_sx(config->deep_sx_config);
/* Clear registers that contain write-1-to-clear bits. */
reg_script_run_on_dev(dev, pmc_write1_to_clear_script);
}
static void pm1_enable_pwrbtn_smi(void *unused)
{
/*
* Enable power button SMI only before jumping to payload. This ensures
* that:
* 1. Power button SMI is enabled only after coreboot is done.
* 2. On resume path, power button SMI is not enabled and thus avoids
* any shutdowns because of power button presses due to power button
* press in resume path.
*/
pmc_update_pm1_enable(PWRBTN_EN);
}
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, pm1_enable_pwrbtn_smi, NULL);
/*
* Check if WAKE# pin is enabled based on DSX_EN_WAKE_PIN setting in
* deep_sx_config. If WAKE# pin is not enabled, then PCI Express Wake Disable
* bit needs to be set in PM1_EN to avoid unnecessary wakes caused by WAKE#
* pin.
*/
static void pm1_handle_wake_pin(void *unused)
{
const config_t *conf = config_of_soc();
/* If WAKE# pin is enabled, bail out early. */
if (conf->deep_sx_config & DSX_EN_WAKE_PIN)
return;
pmc_update_pm1_enable(PCIEXPWAK_DIS);
}
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, pm1_handle_wake_pin, NULL);
BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_EXIT, pm1_handle_wake_pin, NULL);
#endif
|
