1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
* Copyright (C) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/acpigen.h>
#include "chip.h"
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
#include <arch/io.h>
#include <arch/ioapic.h>
#include <arch/acpi.h>
#include <cpu/cpu.h>
#include <cpu/x86/smm.h>
#include <cbmem.h>
#include <intelblocks/itss.h>
#include <intelblocks/pcr.h>
#include <reg_script.h>
#include <string.h>
#include <soc/acpi.h>
#include <soc/gpio.h>
#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/nvs.h>
#include <soc/pch.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include <soc/pmc.h>
#include <soc/ramstage.h>
#include <soc/pcr_ids.h>
#if IS_ENABLED(CONFIG_CHROMEOS)
#include <vendorcode/google/chromeos/chromeos.h>
#endif
static void pch_enable_ioapic(struct device *dev)
{
u32 reg32;
/* PCH-LP has 120 redirection entries */
const int redir_entries = 120;
set_ioapic_id((void *)IO_APIC_ADDR, 0x02);
/* affirm full set of redirection table entries ("write once") */
reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01);
reg32 &= ~0x00ff0000;
reg32 |= (redir_entries - 1) << 16;
io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32);
/*
* Select Boot Configuration register (0x03) and
* use Processor System Bus (0x01) to deliver interrupts.
*/
io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01);
}
/*
* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
* 0x00 - 0000 = Reserved
* 0x01 - 0001 = Reserved
* 0x02 - 0010 = Reserved
* 0x03 - 0011 = IRQ3
* 0x04 - 0100 = IRQ4
* 0x05 - 0101 = IRQ5
* 0x06 - 0110 = IRQ6
* 0x07 - 0111 = IRQ7
* 0x08 - 1000 = Reserved
* 0x09 - 1001 = IRQ9
* 0x0A - 1010 = IRQ10
* 0x0B - 1011 = IRQ11
* 0x0C - 1100 = IRQ12
* 0x0D - 1101 = Reserved
* 0x0E - 1110 = IRQ14
* 0x0F - 1111 = IRQ15
* PIRQ[n]_ROUT[7] - PIRQ Routing Control
* 0x80 - The PIRQ is not routed.
*/
static void pch_pirq_init(device_t dev)
{
device_t irq_dev;
config_t *config = dev->chip_info;
uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG];
pch_interrupt_routing[0] = config->pirqa_routing;
pch_interrupt_routing[1] = config->pirqb_routing;
pch_interrupt_routing[2] = config->pirqc_routing;
pch_interrupt_routing[3] = config->pirqd_routing;
pch_interrupt_routing[4] = config->pirqe_routing;
pch_interrupt_routing[5] = config->pirqf_routing;
pch_interrupt_routing[6] = config->pirqg_routing;
pch_interrupt_routing[7] = config->pirqh_routing;
itss_irq_init(pch_interrupt_routing);
for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
u8 int_pin = 0, int_line = 0;
if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
continue;
int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
switch (int_pin) {
case 1: /* INTA# */
int_line = config->pirqa_routing;
break;
case 2: /* INTB# */
int_line = config->pirqb_routing;
break;
case 3: /* INTC# */
int_line = config->pirqc_routing;
break;
case 4: /* INTD# */
int_line = config->pirqd_routing;
break;
}
if (!int_line)
continue;
pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
}
}
static const struct reg_script pch_misc_init_script[] = {
/* Setup NMI on errors, disable SERR */
REG_IO_RMW8(0x61, ~0xf0, (1 << 2)),
/* Disable NMI sources */
REG_IO_OR8(0x70, (1 << 7)),
/* Enable BIOS updates outside of SMM */
REG_PCI_RMW8(0xdc, ~(1 << 5), 0),
/* Setup SERIRQ, enable continuous mode */
REG_PCI_OR8(SERIRQ_CNTL, (1 << 7) | (1 << 6)),
#if !IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE)
REG_PCI_RMW8(SERIRQ_CNTL, ~(1 << 6), 0),
#endif
/* Enable CLKRUN_EN for power gating LPC */
REG_PCI_OR8(PCCTL, (CLKRUN_EN)),
REG_SCRIPT_END
};
static void clock_gate_8254(struct device *dev)
{
config_t *config = dev->chip_info;
if (!config->clock_gate_8254)
return;
itss_clock_gate_8254();
}
static void lpc_init(struct device *dev)
{
/* Legacy initialization */
isa_dma_init();
reg_script_run_on_dev(dev, pch_misc_init_script);
/* Interrupt configuration */
pch_enable_ioapic(dev);
pch_pirq_init(dev);
setup_i8259();
i8259_configure_irq_trigger(9, 1);
clock_gate_8254(dev);
}
static void pch_lpc_add_mmio_resources(device_t dev)
{
u32 reg;
struct resource *res;
/*
* As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve
* certain memory range as reserved range for BIOS usage.
* For this SOC, the range will be from 0FD000000h till FE7FFFFFh"
* Hence, use FD000000h as PCR_BASE
*/
const u32 default_decode_base = CONFIG_PCR_BASE_ADDRESS;
res = new_resource(dev, PCI_BASE_ADDRESS_0);
res->base = default_decode_base;
res->size = 0 - default_decode_base;
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
IORESOURCE_FIXED | IORESOURCE_RESERVE;
/* Check LPC Memory Decode register. */
reg = pci_read_config32(dev, LGMR);
if (reg & 1) {
reg &= ~0xffff;
if (reg < default_decode_base) {
res = new_resource(dev, LGMR);
res->base = reg;
res->size = 16 * 1024;
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
IORESOURCE_FIXED | IORESOURCE_RESERVE;
}
}
}
/* Default IO range claimed by the LPC device. The upper bound is exclusive. */
#define LPC_DEFAULT_IO_RANGE_LOWER 0
#define LPC_DEFAULT_IO_RANGE_UPPER 0x1000
static inline int pch_io_range_in_default(u16 base, u16 size)
{
/* Does it start above the range? */
if (base >= LPC_DEFAULT_IO_RANGE_UPPER)
return 0;
/*
* Is it entirely contained?
* Since LPC_DEFAULT_IO_RANGE_LOWER is Zero,
* it need not be checked against lower base.
*/
if ((base + size) < LPC_DEFAULT_IO_RANGE_UPPER)
return 1;
/* This will return not in range for partial overlaps. */
return 0;
}
/*
* Note: this function assumes there is no overlap with the default LPC device's
* claimed range: LPC_DEFAULT_IO_RANGE_LOWER -> LPC_DEFAULT_IO_RANGE_UPPER.
*/
static void pch_lpc_add_io_resource(device_t dev, u16 base, u16 size, int index)
{
struct resource *res;
if (pch_io_range_in_default(base, size))
return;
res = new_resource(dev, index);
res->base = base;
res->size = size;
res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}
static void pch_lpc_add_gen_io_resources(device_t dev, int reg_value, int index)
{
/*
* Check if the register is enabled. If so and the base exceeds the
* device's deafult claim range add the resoure.
*/
if (reg_value & 1) {
u16 base = reg_value & 0xfffc;
u16 size = (0x3 | ((reg_value >> 16) & 0xfc)) + 1;
pch_lpc_add_io_resource(dev, base, size, index);
}
}
static void pch_lpc_add_io_resources(device_t dev)
{
struct resource *res;
config_t *config = dev->chip_info;
/* Add the default claimed IO range for the LPC device. */
res = new_resource(dev, 0);
res->base = LPC_DEFAULT_IO_RANGE_LOWER;
res->size = LPC_DEFAULT_IO_RANGE_UPPER - LPC_DEFAULT_IO_RANGE_LOWER;
res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
/* LPC Generic IO Decode range. */
pch_lpc_add_gen_io_resources(dev, config->gen1_dec, LPC_GEN1_DEC);
pch_lpc_add_gen_io_resources(dev, config->gen2_dec, LPC_GEN2_DEC);
pch_lpc_add_gen_io_resources(dev, config->gen3_dec, LPC_GEN3_DEC);
pch_lpc_add_gen_io_resources(dev, config->gen4_dec, LPC_GEN4_DEC);
}
static void pch_lpc_read_resources(device_t dev)
{
global_nvs_t *gnvs;
/* Get the normal PCI resources of this device. */
pci_dev_read_resources(dev);
/* Add non-standard MMIO resources. */
pch_lpc_add_mmio_resources(dev);
/* Add IO resources. */
pch_lpc_add_io_resources(dev);
/* Allocate ACPI NVS in CBMEM */
gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(global_nvs_t));
if (!acpi_is_wakeup_s3() && gnvs)
memset(gnvs, 0, sizeof(global_nvs_t));
}
static struct device_operations device_ops = {
.read_resources = &pch_lpc_read_resources,
.set_resources = &pci_dev_set_resources,
.enable_resources = &pci_dev_enable_resources,
.acpi_inject_dsdt_generator = southcluster_inject_dsdt,
.write_acpi_tables = southcluster_write_acpi_tables,
.init = &lpc_init,
.scan_bus = &scan_lpc_bus,
.ops_pci = &soc_pci_ops,
};
static const unsigned short pci_device_ids[] = {
PCI_DEVICE_ID_INTEL_SPT_LP_SAMPLE,
PCI_DEVICE_ID_INTEL_SPT_LP_U_BASE,
PCI_DEVICE_ID_INTEL_SPT_LP_U_PREMIUM,
PCI_DEVICE_ID_INTEL_SPT_LP_Y_PREMIUM,
PCI_DEVICE_ID_INTEL_KBP_H_QM170,
PCI_DEVICE_ID_INTEL_KBP_H_PREMIUM,
PCI_DEVICE_ID_INTEL_KBP_H_C236,
PCI_DEVICE_ID_INTEL_KBP_LP_SUPER_SKU,
PCI_DEVICE_ID_INTEL_KBP_LP_U_PREMIUM,
PCI_DEVICE_ID_INTEL_KBP_LP_Y_PREMIUM,
PCI_DEVICE_ID_INTEL_SPT_LP_Y_PREMIUM_HDCP22,
PCI_DEVICE_ID_INTEL_SPT_LP_U_PREMIUM_HDCP22,
0
};
static const struct pci_driver pch_lpc __pci_driver = {
.ops = &device_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.devices = pci_device_ids,
};
|