blob: 46dc9dbfabb447a33335dd9efe08e9e07e9b5d03 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <commonlib/helpers.h>
#include <console/console.h>
#include <device/mmio.h>
#include <device/pci_rom.h>
#include <device/resource.h>
#include <drivers/intel/gma/i915.h>
#include <drivers/intel/gma/i915_reg.h>
#include <intelblocks/graphics.h>
#include <soc/ramstage.h>
#include <soc/systemagent.h>
#include <types.h>
void graphics_soc_panel_init(struct device *dev)
{
struct soc_intel_skylake_config *conf = config_of(dev);
struct resource *mmio_res;
uint8_t *base;
u32 reg32;
if (!conf)
return;
mmio_res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (!mmio_res || !mmio_res->base)
return;
base = (void *)(uintptr_t)mmio_res->base;
reg32 = conf->gpu_pp_up_delay_ms * 10 << 16;
reg32 |= conf->gpu_pp_backlight_on_delay_ms * 10;
write32(base + PCH_PP_ON_DELAYS, reg32);
reg32 = conf->gpu_pp_down_delay_ms * 10 << 16;
reg32 |= conf->gpu_pp_backlight_off_delay_ms * 10;
write32(base + PCH_PP_OFF_DELAYS, reg32);
reg32 = read32(base + PCH_PP_DIVISOR);
reg32 &= ~0x1f;
reg32 |= (DIV_ROUND_UP(conf->gpu_pp_cycle_delay_ms, 100) + 1) & 0x1f;
write32(base + PCH_PP_DIVISOR, reg32);
/* So far all devices seem to use the PCH PWM function.
The CPU PWM registers are all zero after reset. */
if (conf->gpu_pch_backlight_pwm_hz) {
/* Reference clock is 24MHz. We can choose either a 16
or a 128 step increment. Use 16 if we would have less
than 100 steps otherwise. */
const unsigned int hz_limit = 24 * 1000 * 1000 / 128 / 100;
unsigned int pwm_increment, pwm_period;
u32 south_chicken1;
south_chicken1 = read32(base + SOUTH_CHICKEN1);
if (conf->gpu_pch_backlight_pwm_hz > hz_limit) {
pwm_increment = 16;
south_chicken1 &= ~1;
} else {
pwm_increment = 128;
south_chicken1 |= 1;
}
write32(base + SOUTH_CHICKEN1, south_chicken1);
pwm_period = 24 * 1000 * 1000 / pwm_increment
/ conf->gpu_pch_backlight_pwm_hz;
/* Start with a 50% duty cycle. */
write32(base + BLC_PWM_PCH_CTL2,
pwm_period << 16 | pwm_period / 2);
write32(base + BLC_PWM_PCH_CTL1,
!!conf->gpu_pch_backlight_polarity << 29 |
BLM_PCH_PWM_ENABLE);
}
}
const struct i915_gpu_controller_info *
intel_igd_get_controller_info(const struct device *device)
{
struct soc_intel_skylake_config *chip = device->chip_info;
return &chip->gfx;
}
/*
* Some VGA option roms are used for several chipsets but they only have one PCI ID in their
* header. If we encounter such an option rom, we need to do the mapping ourselves.
*/
u32 map_oprom_vendev(u32 vendev)
{
u32 new_vendev = vendev;
switch (vendev) {
case 0x80865916: /* PCI_DEVICE_ID_INTEL_KBL_GT2_SULTM */
case 0x80865917: /* PCI_DEVICE_ID_INTEL_KBL_GT2_SULTMR */
new_vendev = SA_IGD_OPROM_VENDEV;
break;
}
return new_vendev;
}
|
