1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/pci_ops.h>
#include <device/device.h>
#include <device/pci_def.h>
#include <intelblocks/cse.h>
#include <intelblocks/dmi.h>
#include <intelblocks/fast_spi.h>
#include <intelblocks/gspi.h>
#include <intelblocks/itss.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/p2sb.h>
#include <intelblocks/pcr.h>
#include <intelblocks/pmclib.h>
#include <intelblocks/rtc.h>
#include <soc/bootblock.h>
#include <soc/iomap.h>
#include <soc/p2sb.h>
#include <soc/pch.h>
#include <soc/pci_devs.h>
#include <soc/pcr_ids.h>
#include <soc/pm.h>
#include <soc/pmc.h>
#include "../chip.h"
#define PCR_DMI_ACPIBA 0x27B4
#define PCR_DMI_ACPIBDID 0x27B8
#define PCR_DMI_PMBASEA 0x27AC
#define PCR_DMI_PMBASEC 0x27B0
void bootblock_pch_early_init(void)
{
/*
* Perform P2SB configuration before any another controller initialization as the
* controller might want to perform PCR settings.
*/
p2sb_enable_bar();
p2sb_configure_hpet();
fast_spi_early_init(SPI_BASE_ADDRESS);
}
static void soc_config_acpibase(void)
{
uint32_t reg32;
/* Disable ABASE in PMC Device first before changing Base Address */
reg32 = pci_read_config32(PCH_DEV_PMC, ACTL);
pci_write_config32(PCH_DEV_PMC, ACTL, reg32 & ~ACPI_EN);
/* Program ACPI Base */
pci_write_config32(PCH_DEV_PMC, ABASE, ACPI_BASE_ADDRESS);
/* Enable ACPI in PMC */
pci_write_config32(PCH_DEV_PMC, ACTL, reg32 | ACPI_EN);
/*
* Program "ACPI Base Address" PCR[DMI] + 27B4h[23:18, 15:2, 0]
* to [0x3F, PMC PCI Offset 40h bit[15:2], 1]
*/
reg32 = ((0x3f << 18) | ACPI_BASE_ADDRESS | 1);
pcr_write32(PID_DMI, PCR_DMI_ACPIBA, reg32);
if (CONFIG(SKYLAKE_SOC_PCH_H))
pcr_write32(PID_DMI, PCR_DMI_ACPIBDID, 0x23a8);
else
pcr_write32(PID_DMI, PCR_DMI_ACPIBDID, 0x23a0);
}
static void soc_config_pwrmbase(void)
{
uint32_t reg32;
/* Disable PWRMBASE in PMC Device first before changing Base address */
reg32 = pci_read_config32(PCH_DEV_PMC, ACTL);
pci_write_config32(PCH_DEV_PMC, ACTL, reg32 & ~PWRM_EN);
/* Program PWRM Base */
pci_write_config32(PCH_DEV_PMC, PWRMBASE, PCH_PWRM_BASE_ADDRESS);
/* Enable PWRM in PMC */
pci_write_config32(PCH_DEV_PMC, ACTL, reg32 | PWRM_EN);
/*
* Program "PM Base Address Memory Range Base" PCR[DMI] + 27ACh[15:0]
* to the same value programmed in PMC PCI Offset 48h bit[31:16],
* this has an implication of making sure the PWRMBASE to be
* 64KB aligned.
*
* Program "PM Base Address Memory Range Limit" PCR[DMI] + 27ACh[31:16]
* to the value programmed in PMC PCI Offset 48h bit[31:16], this has an
* implication of making sure the memory allocated to PWRMBASE to be
* 64KB in size.
*/
pcr_write32(PID_DMI, PCR_DMI_PMBASEA,
((PCH_PWRM_BASE_ADDRESS & 0xFFFF0000) |
(PCH_PWRM_BASE_ADDRESS >> 16)));
if (CONFIG(SKYLAKE_SOC_PCH_H))
pcr_write32(PID_DMI, PCR_DMI_PMBASEC, 0x800023a8);
else
pcr_write32(PID_DMI, PCR_DMI_PMBASEC, 0x800023a0);
}
void pch_early_iorange_init(void)
{
uint16_t io_enables = LPC_IOE_SUPERIO_2E_2F | LPC_IOE_KBC_60_64 |
LPC_IOE_EC_62_66;
const config_t *config = config_of_soc();
if (config->lpc_ioe) {
io_enables = config->lpc_ioe & 0x3f0f;
lpc_set_fixed_io_ranges(config->lpc_iod, 0x1377);
} else {
/* IO Decode Range */
if (CONFIG(DRIVERS_UART_8250IO))
lpc_io_setup_comm_a_b();
}
/* IO Decode Enable */
lpc_enable_fixed_io_ranges(io_enables);
/* Program generic IO Decode Range */
pch_enable_lpc();
}
void bootblock_pch_init(void)
{
/*
* Enabling ABASE for accessing PM1_STS, PM1_EN, PM1_CNT,
* GPE0_STS, GPE0_EN registers.
*/
soc_config_acpibase();
/*
* Enabling PWRM Base for accessing
* Global Reset Cause Register.
*/
soc_config_pwrmbase();
/* Set up GPE configuration */
pmc_gpe_init();
enable_rtc_upper_bank();
/* initialize Heci interface */
heci_init(HECI1_BASE_ADDRESS);
gspi_early_bar_init();
}
|
