1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
|
/* SPDX-License-Identifier: GPL-2.0-only */
#define PORTSCN_OFFSET 0x480
#define PORTSCXUSB3_OFFSET 0x540
#define WAKE_ON_CONNECT_DISCONNECT_ENABLE 0x6000000
#define RO_BITS_OFF_MASK ~0x80FE0012
/*
* USB Port Wake Enable (UPWE) on usb attach/detach
* Arg0 - Port Number
* Arg1 - Port 1 Status and control offset
* Arg2 - xHCI Memory-mapped address
*/
Method (UPWE, 3, Serialized)
{
Local0 = Arg1 + ((Arg0 - 1) * 0x10)
/* Map ((XMEM << 16) + Local0 in PSCR */
OperationRegion (PSCR, SystemMemory,
Add (ShiftLeft (Arg2, 16), Local0), 0x10)
Field (PSCR, DWordAcc, NoLock, Preserve)
{
PSCT, 32,
}
Local0 = PSCT
/*
* And port status/control reg with RO and RWS bits
* RO bits: 0, 2:3, 10:13, 24, 28:30
* RWS bits: 5:9, 14:16, 25:27
*/
Local0 = Local0 & RO_BITS_OFF_MASK
/* Set WCE and WDE bits */
Local0 = Local0 | WAKE_ON_CONNECT_DISCONNECT_ENABLE
PSCT = Local0
}
/*
* USB Wake Enable Setup (UWES)
* Arg0 - Port enable bitmap
* Arg1 - Port 1 Status and control offset
* Arg2 - xHCI Memory-mapped address
*/
Method (UWES, 3, Serialized)
{
Local0 = Arg0
While (One) {
FindSetRightBit (Local0, Local1)
If (Local1 == Zero) {
Break
}
UPWE (Local1, Arg1, Arg2)
/*
* Clear the lowest set bit in Local0 since it was
* processed.
*/
Local0 = Local0 & (Local0 - 1)
}
}
/* XHCI Controller 0:14.0 */
Device (XHCI)
{
Name (_ADR, 0x00140000)
Name (_PRW, Package () { GPE0_PME_B0, 3 })
Method (_DSW, 3)
{
PMEE = Arg0
UWES ((\U2WE & 0x3FF), PORTSCN_OFFSET, XMEM)
UWES ((\U3WE & 0x3F ), PORTSCXUSB3_OFFSET, XMEM)
}
Name (_S3D, 3) /* D3 supported in S3 */
Name (_S4D, 3) /* D3 supported in S4 */
Name (_S0W, 3) /* D3 can wake device in S0 */
Name (_S3W, 3) /* D3 can wake system from S3 */
Name (_S4W, 3) /* D3 can wake system from S4 */
OperationRegion (XPRT, PCI_Config, 0x00, 0x100)
Field (XPRT, AnyAcc, NoLock, Preserve)
{
DVID, 16, /* VENDORID */
Offset (0x10),
, 16,
XMEM, 16, /* MEM_BASE */
Offset (0x50), /* XHCLKGTEN */
, 2,
STGE, 1, /* SS Link Trunk clock gating enable */
Offset (0x74),
D0D3, 2, /* POWERSTATE */
, 6,
PMEE, 1, /* PME_EN */
, 6,
PMES, 1, /* PME_STS */
Offset (0xA2),
, 2,
D3HE, 1, /* D3_hot_en */
}
OperationRegion (XREG, SystemMemory,
Add (ShiftLeft (XMEM, 16), 0x8000), 0x200)
Field (XREG, DWordAcc, Lock, Preserve)
{
Offset (0x1c4), /* USB2PMCTRL */
, 2,
UPSW, 2, /* U2PSUSPGP */
}
Method (_PSC, 0, Serialized)
{
Return (^D0D3)
}
Method (_PS0, 0, Serialized)
{
If (^DVID != 0xFFFF) {
If (!((^XMEM == 0xFFFF) || (^XMEM == 0x0000))) {
/* Disable d3hot and SS link trunk clock gating */
^D3HE = 0
^STGE = 0
/* If device is in D3, set back to D0 */
If (^D0D3 == 3) {
Local0 = 0
^D0D3 = Local0
Local0 = ^D0D3
}
/* Disable USB2 PHY SUS Well Power Gating */
^UPSW = 0
/*
* Apply USB2 PHPY Power Gating workaround if needed.
*/
If (^^PMC.UWAB) {
/* Write to MTPMC to have PMC disable power gating */
^^PMC.MPMC = 1
/* Wait for PCH_PM_STS.MSG_FULL_STS to be 0 */
Local0 = 10
While (^^PMC.PMFS) {
If (!Local0) {
Break
}
Local0--
Sleep (10)
}
}
}
}
}
Method (_PS3, 0, Serialized)
{
If (^DVID != 0xFFFF) {
If (!((^XMEM == 0xFFFF) || (^XMEM == 0x0000))) {
/* Clear PME Status */
^PMES = 1
/* Enable PME */
^PMEE= 1
/* If device is in D3, set back to D0 */
If (^D0D3 == 3) {
Local0 = 0
^D0D3 = Local0
Local0 = ^D0D3
}
/* Enable USB2 PHY SUS Well Power Gating in D0/D0i2/D0i3/D3 */
^UPSW = 3
/* Enable d3hot and SS link trunk clock gating */
^D3HE = 1
^STGE = 1
/* Now put device in D3 */
Local0 = 3
^D0D3 = Local0
Local0 = ^D0D3
/*
* Apply USB2 PHPY Power Gating workaround if needed.
* This code assumes XDCI is disabled, if it is enabled
* then this must also check if it is in D3 state too.
*/
If (^^PMC.UWAB) {
/* Write to MTPMC to have PMC enable power gating */
^^PMC.MPMC = 3
/* Wait for PCH_PM_STS.MSG_FULL_STS to be 0 */
Local0 = 10
While (^^PMC.PMFS) {
If (!Local0) {
Break
}
Local0--
Sleep (10)
}
}
}
}
}
/* Root Hub for Skylake-LP PCH */
Device (RHUB)
{
Name (_ADR, Zero)
// GPLD: Generate Port Location Data (PLD)
Method (GPLD, 1, Serialized)
{
Name (PCKG, Package (0x01)
{
Buffer (0x10) {}
})
// REV: Revision 0x02 for ACPI 5.0
CreateField (DerefOf (Index (PCKG, Zero)), Zero, 0x07, REV)
REV = 0x02
// VISI: Port visibility to user per port
CreateField (DerefOf (Index (PCKG, Zero)), 0x40, One, VISI)
VISI = Arg0
Return (PCKG)
}
/* USB2 */
Device (HS01) { Name (_ADR, 1) }
Device (HS02) { Name (_ADR, 2) }
Device (HS03) { Name (_ADR, 3) }
Device (HS04) { Name (_ADR, 4) }
Device (HS05) { Name (_ADR, 5) }
Device (HS06) { Name (_ADR, 6) }
Device (HS07) { Name (_ADR, 7) }
Device (HS08) { Name (_ADR, 8) }
Device (HS09) { Name (_ADR, 9) }
Device (HS10) { Name (_ADR, 10) }
/* USBr */
Device (USR1) { Name (_ADR, 11) }
Device (USR2) { Name (_ADR, 12) }
/* USB3 */
Device (SS01) { Name (_ADR, 13) }
Device (SS02) { Name (_ADR, 14) }
Device (SS03) { Name (_ADR, 15) }
Device (SS04) { Name (_ADR, 16) }
Device (SS05) { Name (_ADR, 17) }
Device (SS06) { Name (_ADR, 18) }
}
}
|
