1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <device/pci_ids.h>
#include <soc/pci_devs.h>
#include <soc/reg_access.h>
/* USB Phy Registers */
#define USB2_GLOBAL_PORT 0x4001
#define USB2_PLL1 0x7F02
#define USB2_PLL2 0x7F03
#define USB2_COMPBG 0x7F04
/* EHCI Packet Buffer OUT/IN Thresholds, values in number of DWORDs */
#define EHCI_OUT_THRESHOLD_VALUE 0x7f
#define EHCI_IN_THRESHOLD_VALUE 0x7f
/* Platform init USB device interrupt masks */
#define V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG (0x0000007f)
#define V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG \
(B_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG_OUT_EP_MASK \
| B_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG_IN_EP_MASK)
/* In order to configure the USB PHY to use clk120 (ickusbcoreclk) as PLL
* reference clock and Port2 as a USB device port, the following sequence must
* be followed
*/
static const struct reg_script ehci_init_script[] = {
/* Set packet buffer OUT/IN thresholds */
REG_MMIO_RMW32(R_IOH_EHCI_INSNREG01,
~(B_IOH_EHCI_INSNREG01_OUT_THRESHOLD_MASK
| B_IOH_EHCI_INSNREG01_IN_THRESHOLD_MASK),
(EHCI_OUT_THRESHOLD_VALUE
<< B_IOH_EHCI_INSNREG01_OUT_THRESHOLD_BP)
| (EHCI_IN_THRESHOLD_VALUE
<< B_IOH_EHCI_INSNREG01_IN_THRESHOLD_BP)),
/* Sighting #4930631 PDNRESCFG [8:7] of USB2_GLOBAL_PORT = 11b.
* For port 0 & 1 as host and port 2 as device.
*/
REG_USB_RXW(USB2_GLOBAL_PORT, ~(BIT8 | BIT7 | BIT1), (BIT8 | BIT7)),
/*
* Sighting #4930653 Required BIOS change on Disconnect vref to change
* to 600mV.
*/
REG_USB_RXW(USB2_COMPBG, ~(BIT10 | BIT9 | BIT8 | BIT7),
(BIT10 | BIT7)),
/* Sideband register write to USB AFE (Phy)
* (pllbypass) to bypass/Disable PLL before switch
*/
REG_USB_OR(USB2_PLL2, BIT29),
/* Sideband register write to USB AFE (Phy)
* (coreclksel) to select 120MHz (ickusbcoreclk) clk source.
* (Default 0 to select 96MHz (ickusbclk96_npad/ppad))
*/
REG_USB_OR(USB2_PLL1, BIT1),
/* Sideband register write to USB AFE (Phy)
* (divide by 8) to achieve internal 480MHz clock
* for 120MHz input refclk. (Default: 4'b1000 (divide by 10) for 96MHz)
*/
REG_USB_RXW(USB2_PLL1, ~(BIT6 | BIT5 | BIT4 | BIT3), BIT6),
/* Sideband register write to USB AFE (Phy)
* Clear (pllbypass)
*/
REG_USB_AND(USB2_PLL2, ~BIT29),
/* Sideband register write to USB AFE (Phy)
* Set (startlock) to force the PLL FSM to restart the lock
* sequence due to input clock/freq switch.
*/
REG_USB_OR(USB2_PLL2, BIT24),
REG_SCRIPT_END
};
static const struct reg_script usb_device_port_init_script[] = {
/* Mask and clear controller interrupts */
REG_MMIO_WRITE32(R_IOH_USBDEVICE_D_INTR_MSK_UDC_REG,
V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG),
REG_MMIO_WRITE32(R_IOH_USBDEVICE_D_INTR_UDC_REG,
V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG),
/* Mask and clear end point interrupts */
REG_MMIO_WRITE32(R_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG,
V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG),
REG_MMIO_WRITE32(R_IOH_USBDEVICE_EP_INTR_UDC_REG,
V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG),
REG_SCRIPT_END
};
static void init(struct device *dev)
{
if ((dev->path.pci.devfn & 7) == EHCI_FUNC) {
printk(BIOS_INFO, "Initializing USB PLLs\n");
reg_script_run_on_dev(dev, ehci_init_script);
} else {
printk(BIOS_INFO, "Initializing USB device port\n");
reg_script_run_on_dev(dev, usb_device_port_init_script);
}
}
static struct device_operations device_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = init,
};
static const struct pci_driver driver __pci_driver = {
.ops = &device_ops,
.vendor = PCI_VID_INTEL,
.device = EHCI_DEVID,
};
|
