1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/device.h>
#include <device/pci.h>
#include <fsp/api.h>
#include <fsp/util.h>
#include <gpio.h>
#include <intelblocks/acpi.h>
#include <intelblocks/cfg.h>
#include <intelblocks/cse.h>
#include <intelblocks/irq.h>
#include <intelblocks/itss.h>
#include <intelblocks/p2sb.h>
#include <intelblocks/pcie_rp.h>
#include <intelblocks/systemagent.h>
#include <intelblocks/tcss.h>
#include <intelblocks/xdci.h>
#include <soc/intel/common/reset.h>
#include <soc/intel/common/vbt.h>
#include <soc/iomap.h>
#include <soc/itss.h>
#include <soc/p2sb.h>
#include <soc/pci_devs.h>
#include <soc/pcie.h>
#include <soc/ramstage.h>
#include <soc/soc_chip.h>
#include <soc/tcss.h>
#if CONFIG(HAVE_ACPI_TABLES)
const char *soc_acpi_name(const struct device *dev)
{
if (dev->path.type == DEVICE_PATH_DOMAIN)
return "PCI0";
if (dev->path.type == DEVICE_PATH_USB) {
switch (dev->path.usb.port_type) {
case 0:
/* Root Hub */
return "RHUB";
case 2:
/* USB2 ports */
switch (dev->path.usb.port_id) {
case 0: return "HS01";
case 1: return "HS02";
case 2: return "HS03";
case 3: return "HS04";
case 4: return "HS05";
case 5: return "HS06";
case 6: return "HS07";
case 7: return "HS08";
case 8: return "HS09";
case 9: return "HS10";
}
break;
case 3:
/* USB3 ports */
switch (dev->path.usb.port_id) {
case 0: return "SS01";
case 1: return "SS02";
case 2: return "SS03";
case 3: return "SS04";
}
break;
}
printk(BIOS_DEBUG, "dev->path.type=%x\n", dev->path.usb.port_type);
return NULL;
}
if (dev->path.type != DEVICE_PATH_PCI) {
printk(BIOS_DEBUG, "dev->path.type=%x\n", dev->path.type);
return NULL;
}
switch (dev->path.pci.devfn) {
case PCI_DEVFN_ROOT: return "MCHC";
case PCI_DEVFN_IGD: return "GFX0";
case PCI_DEVFN_TCSS_XHCI: return "TXHC";
case PCI_DEVFN_TCSS_XDCI: return "TXDC";
case PCI_DEVFN_TCSS_DMA0: return "TDM0";
case PCI_DEVFN_TCSS_DMA1: return "TDM1";
case PCI_DEVFN_TBT0: return "TRP0";
case PCI_DEVFN_TBT1: return "TRP1";
case PCI_DEVFN_TBT2: return "TRP2";
case PCI_DEVFN_TBT3: return "TRP3";
case PCI_DEVFN_IPU: return "IPU0";
case PCI_DEVFN_ISH: return "ISHB";
case PCI_DEVFN_XHCI: return "XHCI";
case PCI_DEVFN_I2C0: return "I2C0";
case PCI_DEVFN_I2C1: return "I2C1";
case PCI_DEVFN_I2C2: return "I2C2";
case PCI_DEVFN_I2C3: return "I2C3";
case PCI_DEVFN_I2C4: return "I2C4";
case PCI_DEVFN_I2C5: return "I2C5";
case PCI_DEVFN_SATA: return "SATA";
case PCI_DEVFN_PCIE1: return "RP01";
case PCI_DEVFN_PCIE2: return "RP02";
case PCI_DEVFN_PCIE3: return "RP03";
case PCI_DEVFN_PCIE4: return "RP04";
case PCI_DEVFN_PCIE5: return "RP05";
case PCI_DEVFN_PCIE6: return "RP06";
case PCI_DEVFN_PCIE7: return "RP07";
case PCI_DEVFN_PCIE8: return "RP08";
case PCI_DEVFN_PCIE9: return "RP09";
case PCI_DEVFN_PCIE10: return "RP10";
case PCI_DEVFN_PCIE11: return "RP11";
case PCI_DEVFN_PCIE12: return "RP12";
case PCI_DEVFN_PMC: return "PMC";
case PCI_DEVFN_UART0: return "UAR0";
case PCI_DEVFN_UART1: return "UAR1";
case PCI_DEVFN_UART2: return "UAR2";
case PCI_DEVFN_GSPI0: return "SPI0";
case PCI_DEVFN_GSPI1: return "SPI1";
case PCI_DEVFN_GSPI2: return "SPI2";
/* Keeping ACPI device name coherent with ec.asl */
case PCI_DEVFN_ESPI: return "LPCB";
case PCI_DEVFN_HDA: return "HDAS";
case PCI_DEVFN_SMBUS: return "SBUS";
case PCI_DEVFN_GBE: return "GLAN";
}
printk(BIOS_DEBUG, "Missing ACPI Name for PCI: 00:%02x.%01x\n",
PCI_SLOT(dev->path.pci.devfn), PCI_FUNC(dev->path.pci.devfn));
return NULL;
}
#endif
/* SoC routine to fill GPIO PM mask and value for GPIO_MISCCFG register */
static void soc_fill_gpio_pm_configuration(void)
{
uint8_t value[TOTAL_GPIO_COMM];
const config_t *config = config_of_soc();
if (config->gpio_override_pm)
memcpy(value, config->gpio_pm, sizeof(value));
else
memset(value, MISCCFG_GPIO_PM_CONFIG_BITS, sizeof(value));
gpio_pm_configure(value, TOTAL_GPIO_COMM);
}
void soc_init_pre_device(void *chip_info)
{
config_t *config = config_of_soc();
/* Validate TBT image authentication */
config->tbt_authentication = ioe_p2sb_sbi_read(PID_IOM,
IOM_CSME_IMR_TBT_STATUS) & TBT_VALID_AUTHENTICATION;
/* Perform silicon specific init. */
fsp_silicon_init();
/* Display FIRMWARE_VERSION_INFO_HOB */
fsp_display_fvi_version_hob();
soc_fill_gpio_pm_configuration();
/* Swap enabled PCI ports in device tree if needed. */
pcie_rp_update_devicetree(get_pcie_rp_table());
/*
* Earlier when coreboot used to send EOP at late as possible caused
* issue of delayed response from CSE since CSE was busy loading payload.
* To resolve the issue, EOP should be sent earlier than current sequence
* in the boot sequence at BS_DEV_INIT.
*
* Intel CSE team recommends to send EOP close to FW init (between FSP-S
* exit and current boot sequence) to reduce message response time from
* CSE hence moving sending EOP to earlier stage.
*/
if (CONFIG(SOC_INTEL_CSE_SEND_EOP_EARLY) ||
CONFIG(SOC_INTEL_CSE_SEND_EOP_ASYNC)) {
printk(BIOS_INFO, "Sending EOP early from SoC\n");
cse_send_end_of_post();
}
}
static void cpu_fill_ssdt(const struct device *dev)
{
if (!generate_pin_irq_map())
printk(BIOS_ERR, "Failed to generate ACPI _PRT table!\n");
generate_cpu_entries(dev);
}
static void cpu_set_north_irqs(struct device *dev)
{
irq_program_non_pch();
}
static struct device_operations pci_domain_ops = {
.read_resources = &pci_domain_read_resources,
.set_resources = &pci_domain_set_resources,
.scan_bus = &pci_domain_scan_bus,
#if CONFIG(HAVE_ACPI_TABLES)
.acpi_name = &soc_acpi_name,
.acpi_fill_ssdt = ssdt_set_above_4g_pci,
#endif
};
static struct device_operations cpu_bus_ops = {
.read_resources = noop_read_resources,
.set_resources = noop_set_resources,
.enable_resources = cpu_set_north_irqs,
#if CONFIG(HAVE_ACPI_TABLES)
.acpi_fill_ssdt = cpu_fill_ssdt,
#endif
};
static void soc_enable(struct device *dev)
{
/*
* Set the operations if it is a special bus type or a hidden PCI
* device.
*/
if (dev->path.type == DEVICE_PATH_DOMAIN)
dev->ops = &pci_domain_ops;
else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER)
dev->ops = &cpu_bus_ops;
else if (dev->path.type == DEVICE_PATH_PCI &&
dev->path.pci.devfn == PCI_DEVFN_PMC)
dev->ops = &pmc_ops;
else if (dev->path.type == DEVICE_PATH_PCI &&
dev->path.pci.devfn == PCI_DEVFN_P2SB)
dev->ops = &soc_p2sb_ops;
else if (dev->path.type == DEVICE_PATH_PCI &&
dev->path.pci.devfn == PCI_DEVFN_IOE_P2SB)
dev->ops = &ioe_p2sb_ops;
else if (dev->path.type == DEVICE_PATH_GPIO)
block_gpio_enable(dev);
}
static void soc_init_final_device(void *chip_info)
{
uint32_t reset_status = fsp_get_pch_reset_status();
if (reset_status == FSP_SUCCESS)
return;
/* Handle any pending reset request from previously executed FSP APIs */
fsp_handle_reset(reset_status);
/* Control shouldn't return here */
die_with_post_code(POSTCODE_HW_INIT_FAILURE,
"Failed to handle the FSP reset request with error 0x%08x\n", reset_status);
}
struct chip_operations soc_intel_meteorlake_ops = {
CHIP_NAME("Intel Meteorlake")
.enable_dev = &soc_enable,
.init = &soc_init_pre_device,
.final = &soc_init_final_device,
};
|
