1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _BAYTRAIL_IOSF_H_
#define _BAYTRAIL_IOSF_H_
#include <stdint.h>
#include <baytrail/pci_devs.h>
/*
* The Bay Trail SoC has a message network called IOSF Sideband. The access
* routines are through 3 registers in PCI config space of 00:00.0:
* MCR - control register
* MDR - data register
* MCRX - control register extension
* The extension register is only used for addresses that don't fit into the
* 8 bit register address.
*/
#ifndef PCI_DEV
#define PCI_DEV(SEGBUS, DEV, FN) ( \
(((SEGBUS) & 0xFFF) << 20) | \
(((DEV) & 0x1F) << 15) | \
(((FN) & 0x07) << 12))
#endif
#define IOSF_PCI_DEV PCI_DEV(0,SOC_DEV,SOC_FUNC)
#define MCR_REG 0xd0
#define IOSF_OPCODE(x) ((x) << 24)
#define IOSF_PORT(x) ((0xff & (x)) << 16)
#define IOSF_REG(x) ((0xff & (x)) << 8)
#define IOSF_REG_UPPER(x) (((~0xff) & (x)))
#define IOSF_BYTE_EN_0 0x10
#define IOSF_BYTE_EN_1 0x20
#define IOSF_BYTE_EN_2 0x40
#define IOSF_BYTE_EN_3 0x80
#define IOSF_BYTE_EN \
(IOSF_BYTE_EN_0 | IOSF_BYTE_EN_1 | IOSF_BYTE_EN_2 | IOSF_BYTE_EN_3)
#define MDR_REG 0xd4
#define MCRX_REG 0xd8
uint32_t iosf_bunit_read(int reg);
void iosf_bunit_write(int reg, uint32_t val);
uint32_t iosf_dunit_read(int reg);
void iosf_dunit_write(int reg, uint32_t val);
/* Some registers are per channel while the gloals live in dunit 0 */
uint32_t iosf_dunit_ch0_read(int reg);
uint32_t iosf_dunit_ch1_read(int reg);
uint32_t iosf_punit_read(int reg);
uint32_t iosf_lpss_read(int reg);
void iosf_lpss_write(int reg, uint32_t val);
/* IOSF ports. */
#define IOSF_PORT_AUNIT 0x00 /* IO Arbiter unit */
#define IOSF_PORT_SYSMEMC 0x01 /* System Memory Controller */
#define IOSF_PORT_BUNIT 0x03 /* System Memroy Arbiter/Bunit */
#define IOSF_PORT_DUNIT_CH1 0x07 /* DUNIT Channel 1 */
#define IOSF_PORT_USBPHY 0x43 /* USB PHY */
#define IOSF_PORT_USHPHY 0x61 /* USB XHCI PHY */
#define IOSF_PORT_LPSS 0xa0 /* LPSS - Low Power Subsystem */
/* Read and write opcodes differ per port. */
#define IOSF_OP_READ_SYSMEMC 0x10
#define IOSF_OP_WRITE_SYSMEMC (IOSF_OP_READ_SYSMEMC | 1)
#define IOSF_OP_READ_BUNIT 0x10
#define IOSF_OP_WRITE_BUNIT (IOSF_OP_READ_BUNIT | 1)
#define IOSF_OP_READ_LPSS 0x06
#define IOSF_OP_WRITE_LPSS (IOSF_OP_READ_LPSS | 1)
/*
* BUNIT Registers.
*/
#define BNOCACHE 0x23
/* BMBOUND has a 128MiB granularity. Highest address is 0xf8000000. */
#define BUNIT_BMBOUND 0x25
/* BMBOUND_HI describes the available ram above 4GiB. It has a
* 256MiB granularity. Physical address bits 35:28 are compared with 31:24
* bits in the BMBOUND_HI register. Also note that since BMBOUND has 128MiB
* granularity care needs to be taken with the e820 map to account for a hole
* in the ram. */
#define BUNIT_BMBOUND_HI 0x26
#define BUNIT_MMCONF_REG 0x27
/* The SMMRR registers define the SMM region in MiB granularity. */
#define BUNIT_SMRRL 0x2e
#define BUNIT_SMRRH 0x2f
# define BUNIT_SMRR_ENABLE (1 << 31)
/*
* DUNIT Registers.
*/
#define DRP 0x00
# define DRP_DIMM0_RANK0_EN (0x01 << 0)
# define DRP_DIMM0_RANK1_EN (0x01 << 1)
# define DRP_DIMM1_RANK0_EN (0x01 << 2)
# define DRP_DIMM1_RANK1_EN (0x01 << 3)
# define DRP_RANK_MASK (DRP_DIMM0_RANK0_EN | DRP_DIMM0_RANK1_EN | \
DRP_DIMM1_RANK0_EN | DRP_DIMM1_RANK1_EN)
#define DTR0 0x01
# define DTR0_SPEED_MASK 0x03
# define DTR0_SPEED_800 0x00
# define DTR0_SPEED_1066 0x01
# define DTR0_SPEED_1333 0x02
# define DTR0_SPEED_1600 0x03
/*
* LPSS Registers
*/
#define LPSS_SIO_DMA1_CTL 0x280
#define LPSS_I2C1_CTL 0x288
#define LPSS_I2C2_CTL 0x290
#define LPSS_I2C3_CTL 0x298
#define LPSS_I2C4_CTL 0x2a0
#define LPSS_I2C5_CTL 0x2a8
#define LPSS_I2C6_CTL 0x2b0
#define LPSS_I2C7_CTL 0x2b8
#define LPSS_SIO_DMA2_CTL 0x240
#define LPSS_PWM1_CTL 0x248
#define LPSS_PWM2_CTL 0x250
#define LPSS_HSUART1_CTL 0x258
#define LPSS_HSUART2_CTL 0x260
#define LPSS_SPI_CTL 0x268
# define LPSS_CTL_ACPI_INT_EN (1 << 21)
# define LPSS_CTL_PCI_CFG_DIS (1 << 20)
# define LPSS_CTL_SNOOP (1 << 18)
# define LPSS_CTL_NOSNOOP (1 << 19)
# define LPSS_CTL_PM_CAP_PRSNT (1 << 1)
/*
* SCC Registers
*/
#define SCC_SD_CTL 0x504
#define SCC_SDIO_CTL 0x508
#define SCC_MMC_CTL 0x50c
# define SCC_CTL_PCI_CFG_DIS (1 << 0)
# define SCC_CTL_ACPI_INT_EN (1 << 1)
/*
* CCU Registers
*/
#define PLT_CLK_CTRL_0 0x3c
#define PLT_CLK_CTRL_1 0x40
#define PLT_CLK_CTRL_2 0x44
#define PLT_CLK_CTRL_3 0x48
#define PLT_CLK_CTRL_4 0x4c
#define PLT_CLK_CTRL_5 0x50
# define PLT_CLK_CTRL_19P2MHZ_FREQ (0 << 1)
# define PLT_CLK_CTRL_25MHZ_FREQ (1 << 1)
# define PLT_CLK_CTRL_SELECT_FREQ (1 << 0)
/*
* USBPHY Registers
*/
#define USBPHY_COMPBG 0x7f04
#define USBPHY_PER_PORT_LANE0 0x4100
#define USBPHY_PER_PORT_RCOMP_HS_PULLUP0 0x4122
#define USBPHY_PER_PORT_LANE1 0x4200
#define USBPHY_PER_PORT_RCOMP_HS_PULLUP1 0x4222
#define USBPHY_PER_PORT_LANE2 0x4300
#define USBPHY_PER_PORT_RCOMP_HS_PULLUP2 0x4322
#define USBPHY_PER_PORT_LANE3 0x4400
#define USBPHY_PER_PORT_RCOMP_HS_PULLUP3 0x4422
/*
* USHPHY Registers
*/
#define USHPHY_CDN_PLL_CONTROL 0x03c0
#define USHPHY_CDN_VCO_START_CAL_POINT 0x0054
#define USHPHY_CCDRLF 0x8040
#define USHPHY_PEAKING_AMP_CONFIG_DIAG 0x80a8
#define USHPHY_OFFSET_COR_CONFIG_DIAG 0x80b0
#define USHPHY_VGA_GAIN_CONFIG_DIAG 0x8080
#define USHPHY_REE_DAC_CONTROL 0x80b8
#define USHPHY_CDN_U1_POWER_STATE_DEF 0x0000
#endif /* _BAYTRAIL_IOSF_H_ */
|
