1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <commonlib/helpers.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <fsp/soc_binding.h>
#include <gpio.h>
#include <soc/bootblock.h>
#include <soc/uart.h>
static uint16_t legacy_uart_ioadr_tab[] = {0x3F8, 0x2F8, 0x3E8, 0x2E8};
#define ELEM_OF_UART_TAB ARRAY_SIZE(legacy_uart_ioadr_tab)
static void pci_early_hsuart_device_probe(u8 bus, u8 dev, u8 func,
u32 mmio_base)
{
register uint16_t reg16;
pci_devfn_t uart_dev = PCI_DEV(bus, dev, func);
/* We're using MMIO for HSUARTs. This section is needed for logging
* from FSP only
*/
/* Decode IOBASE at IOBA (BAR0). */
reg16 = pci_read_config16(uart_dev, PCI_BASE_ADDRESS_0) | mmio_base;
pci_write_config16(uart_dev, PCI_BASE_ADDRESS_0, reg16);
#if (CONFIG(NON_LEGACY_UART_MODE))
/* Decode MMIO at MEMBA (BAR1) */
pci_write_config32(uart_dev, PCI_BASE_ADDRESS_1,
CONFIG_CONSOLE_UART_BASE_ADDRESS +
SIZE_OF_HSUART_RES * func);
#endif
/* Enable memory/io space and allow to initiate
* a transaction as a master
*/
pci_write_config16(uart_dev, PCI_COMMAND,
pci_read_config16(uart_dev, PCI_COMMAND) |
#if (CONFIG(NON_LEGACY_UART_MODE))
PCI_COMMAND_MEMORY |
#endif
PCI_COMMAND_MASTER | PCI_COMMAND_IO);
#if (CONFIG(CONSOLE_SERIAL_230400))
/* Change the highest speed to 230400 */
uint32_t *psr_reg =
(uint32_t *)(CONFIG_CONSOLE_UART_BASE_ADDRESS +
SIZE_OF_HSUART_RES * func + PSR_OFFSET);
*psr_reg >>= 1;
#endif
}
static void early_config_gpio(void)
{
uint32_t reg32;
// HSUART0:
// UART0_RXD
reg32 = read32(
(void *)PCH_PCR_ADDRESS(PID_GPIOCOM1, R_PAD_CFG_DW0_UART0_RXD));
if (((reg32 & B_PCH_GPIO_PAD_MODE) >> N_PCH_GPIO_PAD_MODE) !=
V_PCH_GPIO_PAD_MODE_NAT_1) {
reg32 &= ~B_PCH_GPIO_PAD_MODE;
reg32 |= (UINT32)(V_PCH_GPIO_PAD_MODE_NAT_1
<< N_PCH_GPIO_PAD_MODE);
write32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_UART0_RXD),
reg32);
}
// UART0_TXD
reg32 = read32(
(void *)PCH_PCR_ADDRESS(PID_GPIOCOM1, R_PAD_CFG_DW0_UART0_TXD));
if (((reg32 & B_PCH_GPIO_PAD_MODE) >> N_PCH_GPIO_PAD_MODE) !=
V_PCH_GPIO_PAD_MODE_NAT_1) {
reg32 &= ~B_PCH_GPIO_PAD_MODE;
reg32 |= (UINT32)(V_PCH_GPIO_PAD_MODE_NAT_1
<< N_PCH_GPIO_PAD_MODE);
write32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_UART0_TXD),
reg32);
}
// UART0_CTS
reg32 = read32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_SMB3_CLTT_CLK));
if (((reg32 & B_PCH_GPIO_PAD_MODE) >> N_PCH_GPIO_PAD_MODE) !=
V_PCH_GPIO_PAD_MODE_NAT_2) {
reg32 &= ~B_PCH_GPIO_PAD_MODE;
reg32 |= (UINT32)(V_PCH_GPIO_PAD_MODE_NAT_2
<< N_PCH_GPIO_PAD_MODE);
write32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_SMB3_CLTT_CLK),
reg32);
}
// UART0_RTS
reg32 = read32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_PCIE_CLKREQ5_N));
if (((reg32 & B_PCH_GPIO_PAD_MODE) >> N_PCH_GPIO_PAD_MODE) !=
V_PCH_GPIO_PAD_MODE_NAT_3) {
reg32 &= ~B_PCH_GPIO_PAD_MODE;
reg32 |= (UINT32)(V_PCH_GPIO_PAD_MODE_NAT_3
<< N_PCH_GPIO_PAD_MODE);
write32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_PCIE_CLKREQ5_N),
reg32);
}
// HSUART1:
// UART1_RXD
reg32 = read32(
(void *)PCH_PCR_ADDRESS(PID_GPIOCOM1, R_PAD_CFG_DW0_UART1_RXD));
if (((reg32 & B_PCH_GPIO_PAD_MODE) >> N_PCH_GPIO_PAD_MODE) !=
V_PCH_GPIO_PAD_MODE_NAT_1) {
reg32 &= ~B_PCH_GPIO_PAD_MODE;
reg32 |= (UINT32)(V_PCH_GPIO_PAD_MODE_NAT_1
<< N_PCH_GPIO_PAD_MODE);
write32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_UART1_RXD),
reg32);
}
// UART1_TXD
reg32 = read32(
(void *)PCH_PCR_ADDRESS(PID_GPIOCOM1, R_PAD_CFG_DW0_UART1_TXD));
if (((reg32 & B_PCH_GPIO_PAD_MODE) >> N_PCH_GPIO_PAD_MODE) !=
V_PCH_GPIO_PAD_MODE_NAT_1) {
reg32 &= ~B_PCH_GPIO_PAD_MODE;
reg32 |= (UINT32)(V_PCH_GPIO_PAD_MODE_NAT_1
<< N_PCH_GPIO_PAD_MODE);
write32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_UART1_TXD),
reg32);
}
// UART1_CTS
reg32 = read32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_SATA1_SDOUT));
if (((reg32 & B_PCH_GPIO_PAD_MODE) >> N_PCH_GPIO_PAD_MODE) !=
V_PCH_GPIO_PAD_MODE_NAT_1) {
reg32 &= ~B_PCH_GPIO_PAD_MODE;
reg32 |= (UINT32)(V_PCH_GPIO_PAD_MODE_NAT_1
<< N_PCH_GPIO_PAD_MODE);
write32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_SATA1_SDOUT),
reg32);
}
// UART1_RTS
reg32 = read32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_SATA0_SDOUT));
if (((reg32 & B_PCH_GPIO_PAD_MODE) >> N_PCH_GPIO_PAD_MODE) !=
V_PCH_GPIO_PAD_MODE_NAT_1) {
reg32 &= ~B_PCH_GPIO_PAD_MODE;
reg32 |= (UINT32)(V_PCH_GPIO_PAD_MODE_NAT_1
<< N_PCH_GPIO_PAD_MODE);
write32((void *)PCH_PCR_ADDRESS(PID_GPIOCOM1,
R_PAD_CFG_DW0_SATA0_SDOUT),
reg32);
}
}
void early_uart_init(void)
{
register int i;
/* Check: do we have enough elements to init. ? */
BUILD_BUG_ON(DENVERTON_UARTS_TO_INI > ELEM_OF_UART_TAB);
/* HSUART(B0:D26:0-1) GPIO init. */
early_config_gpio();
for (i = DENVERTON_UARTS_TO_INI - 1; i >= 0; --i) {
pci_early_hsuart_device_probe(0, CONFIG_HSUART_DEV, i,
legacy_uart_ioadr_tab[i]);
}
}
|
