1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
|
/*
* This file is part of the coreboot project.
*
* Copyright 2016 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef SOC_INTEL_COMMON_LPSS_I2C_H
#define SOC_INTEL_COMMON_LPSS_I2C_H
#include <device/i2c.h>
#include <stdint.h>
/*
* Timing values are in units of clock period, with the clock speed
* provided by the SOC in CONFIG_SOC_INTEL_COMMON_LPSS_I2C_CLOCK_MHZ.
* Automatic configuration is done based on requested speed, but the
* values may need tuned depending on the board and the number of
* devices present on the bus.
*/
struct lpss_i2c_speed_config {
enum i2c_speed speed;
/* SCL high and low period count */
uint16_t scl_lcnt;
uint16_t scl_hcnt;
/*
* SDA hold time should be 300ns in standard and fast modes
* and long enough for deterministic logic level change in
* fast-plus and high speed modes.
*
* [15:0] SDA TX Hold Time
* [23:16] SDA RX Hold Time
*/
uint32_t sda_hold;
};
/*
* This I2C controller has support for 3 independent speed configs but can
* support both FAST_PLUS and HIGH speeds through the same set of speed
* config registers. These are treated separately so the speed config values
* can be provided via ACPI to the OS.
*/
#define LPSS_I2C_SPEED_CONFIG_COUNT 4
struct lpss_i2c_bus_config {
/* Bus should be enabled prior to ramstage with temporary base */
int early_init;
/* Bus speed in Hz, default is I2C_SPEED_FAST (400 KHz) */
enum i2c_speed speed;
/* If rise_time_ns is non-zero the calculations for lcnt and hcnt
* registers take into account the times of the bus. However, if
* there is a match in speed_config those register values take
* precedence. */
int rise_time_ns;
int fall_time_ns;
/* Specific bus speed configuration */
struct lpss_i2c_speed_config speed_config[LPSS_I2C_SPEED_CONFIG_COUNT];
};
#define LPSS_I2C_SPEED_CONFIG(speedval,lcnt,hcnt,hold) \
{ \
.speed = I2C_SPEED_ ## speedval, \
.scl_lcnt = (lcnt), \
.scl_hcnt = (hcnt), \
.sda_hold = (hold), \
}
/*
* Return the base address for this bus controller.
*
* This function *must* be implemented by the SOC and return the appropriate
* base address for the I2C registers that correspond to the provided bus.
*/
uintptr_t lpss_i2c_base_address(unsigned bus);
/*
* Generate I2C timing information into the SSDT for the OS driver to consume,
* optionally applying override values provided by the caller.
*/
void lpss_i2c_acpi_fill_ssdt(unsigned bus,
const struct lpss_i2c_bus_config *bcfg);
/*
* Initialize this bus controller and set the speed.
*
* The bus speed can be passed in Hz or using values from device/i2c.h and
* will default to I2C_SPEED_FAST if it is not provided.
*
* The SOC *must* define CONFIG_SOC_INTEL_COMMON_LPSS_I2C_CLOCK for the
* bus speed calculation to be correct.
*/
int lpss_i2c_init(unsigned bus, const struct lpss_i2c_bus_config *bcfg);
#endif
|
