1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <device/azalia_device.h>
#include <device/mmio.h>
#include <delay.h>
#include "hda_verb.h"
static int set_bits(void *port, u32 mask, u32 val)
{
u32 reg32;
int count;
/* Write (val & mask) to port */
val &= mask;
reg32 = read32(port);
reg32 &= ~mask;
reg32 |= val;
write32(port, reg32);
/* Wait for readback of register to match what was just written to it */
count = 50;
do {
/* Wait 1ms based on BKDG wait time */
mdelay(1);
reg32 = read32(port);
reg32 &= mask;
} while ((reg32 != val) && --count);
/* Timeout occurred */
if (!count)
return -1;
return 0;
}
int hda_codec_detect(u8 *base)
{
u8 reg8;
/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0)
goto no_codec;
/* Write back the value once reset bit is set. */
write16(base + HDA_GCAP_REG, read16(base + HDA_GCAP_REG));
/* Clear the "State Change Status Register" STATESTS bits
* for each of the "SDIN Stat Change Status Flag"
*/
write8(base + HDA_STATESTS_REG, 0xf);
/* Turn off the link and poll RESET# bit until it reads back as 0 */
if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, ~HDA_GCTL_CRST) < 0)
goto no_codec;
/* Turn on the link and poll RESET# bit until it reads back as 1 */
if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0)
goto no_codec;
/* Read in Codec location (BAR + 0xe)[2..0]*/
reg8 = read8(base + HDA_STATESTS_REG);
reg8 &= 0x0f;
if (!reg8)
goto no_codec;
return reg8;
no_codec:
/* Codec Not found */
/* Put HDA back in reset (BAR + 0x8) [0] */
set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0);
printk(BIOS_DEBUG, "HDA: No codec!\n");
return 0;
}
/*
* Wait 50usec for the codec to indicate it is ready.
* No response would imply that the codec is non-operative.
*/
static int hda_wait_for_ready(u8 *base)
{
/* Use a 50 usec timeout - the Linux kernel uses the same duration */
int timeout = 50;
while (timeout--) {
u32 reg32 = read32(base + HDA_ICII_REG);
if (!(reg32 & HDA_ICII_BUSY))
return 0;
udelay(1);
}
return -1;
}
/*
* Wait 50usec for the codec to indicate that it accepted the previous command.
* No response would imply that the code is non-operative.
*/
static int hda_wait_for_valid(u8 *base)
{
u32 reg32;
/* Use a 50 usec timeout - the Linux kernel uses the same duration */
int timeout = 50;
/* Send the verb to the codec */
reg32 = read32(base + HDA_ICII_REG);
reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
write32(base + HDA_ICII_REG, reg32);
while (timeout--) {
reg32 = read32(base + HDA_ICII_REG);
if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID)
return 0;
udelay(1);
}
return -1;
}
/*
* Find a specific entry within a verb table
*
* @param verb_table_bytes: verb table size in bytes
* @param verb_table_data: verb table data
* @param viddid: vendor/device to search for
* @param verb: pointer to entry within table
*
* Returns size of the entry within the verb table,
* Returns 0 if the entry is not found
*
* The HDA verb table is composed of dwords. A set of 4 dwords is
* grouped together to form a "jack" descriptor.
* Bits 31:28 - Codec Address
* Bits 27:20 - NID
* Bits 19:8 - Verb ID
* Bits 7:0 - Payload
*
* coreboot groups different codec verb tables into a single table
* and prefixes each with a specific header consisting of 3
* dword entries:
* 1 - Codec Vendor/Device ID
* 2 - Subsystem ID
* 3 - Number of jacks (groups of 4 dwords) for this codec
*/
static u32 hda_find_verb(u32 verb_table_bytes,
const u32 *verb_table_data,
u32 viddid, const u32 **verb)
{
int idx = 0;
while (idx < (verb_table_bytes / sizeof(u32))) {
u32 verb_size = 4 * verb_table_data[idx+2]; // in u32
if (verb_table_data[idx] != viddid) {
idx += verb_size + 3; // skip verb + header
continue;
}
*verb = &verb_table_data[idx+3];
return verb_size;
}
/* Not all codecs need to load another verb */
return 0;
}
int hda_codec_write(u8 *base, u32 size, const u32 *data)
{
int i;
for (i = 0; i < size; i++) {
if (hda_wait_for_ready(base) < 0)
return -1;
write32(base + HDA_IC_REG, data[i]);
if (hda_wait_for_valid(base) < 0)
return -1;
}
return 0;
}
int hda_codec_init(u8 *base, int addr, int verb_size, const u32 *verb_data)
{
const u32 *verb;
u32 reg32, size;
int rc;
printk(BIOS_DEBUG, "HDA: Initializing codec #%d\n", addr);
if (!verb_size || !verb_data) {
printk(BIOS_DEBUG, "HDA: No verb list!\n");
return -1;
}
/* 1 */
if (hda_wait_for_ready(base) < 0) {
printk(BIOS_DEBUG, " codec not ready.\n");
return -1;
}
reg32 = (addr << 28) | 0x000f0000;
write32(base + HDA_IC_REG, reg32);
if (hda_wait_for_valid(base) < 0) {
printk(BIOS_DEBUG, " codec not valid.\n");
return -1;
}
/* 2 */
reg32 = read32(base + HDA_IR_REG);
printk(BIOS_DEBUG, "HDA: codec viddid: %08x\n", reg32);
size = hda_find_verb(verb_size, verb_data, reg32, &verb);
if (!size) {
printk(BIOS_DEBUG, "HDA: No verb table entry found\n");
return -1;
}
/* 3 */
rc = hda_codec_write(base, size, verb);
if (rc < 0)
printk(BIOS_DEBUG, "HDA: verb not loaded\n");
else
printk(BIOS_DEBUG, "HDA: verb loaded.\n");
return rc;
}
|
