path: root/src/soc/intel/common/block/uart/uart.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <acpi/acpi.h>
#include <acpi/acpigen.h>
#include <acpi/acpi_gnvs.h>
#include <console/uart.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <intelblocks/lpss.h>
#include <intelblocks/uart.h>
#include <soc/pci_devs.h>
#include <soc/iomap.h>
#include <soc/irq.h>
#include <soc/nvs.h>
#include "chip.h"

#define UART_PCI_ENABLE	(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER)
#define UART_CONSOLE_INVALID_INDEX	0xFF

extern const struct uart_gpio_pad_config uart_gpio_pads[];
extern const int uart_max_index;

static void uart_lpss_init(const struct device *dev, uintptr_t baseaddr)
{
	/* Ensure controller is in D0 state */
	lpss_set_power_state(dev, STATE_D0);

	/* Take UART out of reset */
	lpss_reset_release(baseaddr);

	/* Set M and N divisor inputs and enable clock */
	lpss_clk_update(baseaddr, CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL,
			CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL);
}

#if CONFIG(INTEL_LPSS_UART_FOR_CONSOLE)
uintptr_t uart_platform_base(unsigned int idx)
{
	if (idx == CONFIG_UART_FOR_CONSOLE)
		return CONFIG_CONSOLE_UART_BASE_ADDRESS;
	return 0;
}
#endif

static int uart_get_valid_index(void)
{
	int index;

	for (index = 0; index < uart_max_index; index++) {
		if (uart_gpio_pads[index].console_index ==
				CONFIG_UART_FOR_CONSOLE)
			return index;
	}
	/* For valid index, code should not reach here */
	return UART_CONSOLE_INVALID_INDEX;
}

void uart_common_init(const struct device *device, uintptr_t baseaddr)
{
#if defined(__SIMPLE_DEVICE__)
	pci_devfn_t dev = PCI_BDF(device);
#else
	const struct device *dev = device;
#endif

	/* Set UART base address */
	pci_write_config32(dev, PCI_BASE_ADDRESS_0, baseaddr);

	/* Enable memory access and bus master */
	pci_write_config16(dev, PCI_COMMAND, UART_PCI_ENABLE);

	uart_lpss_init(device, baseaddr);
}

const struct device *uart_get_device(void)
{
	/*
	 * This function will get called even if INTEL_LPSS_UART_FOR_CONSOLE
	 * config option is not selected.
	 * By default return NULL in this case to avoid compilation errors.
	 */
	if (!CONFIG(INTEL_LPSS_UART_FOR_CONSOLE))
		return NULL;

	int console_index = uart_get_valid_index();

	if (console_index != UART_CONSOLE_INVALID_INDEX)
		return soc_uart_console_to_device(CONFIG_UART_FOR_CONSOLE);
	else
		return NULL;
}

bool uart_is_controller_initialized(void)
{
	uintptr_t base;
	const struct device *dev_uart = uart_get_device();

	if (!dev_uart)
		return false;

#if defined(__SIMPLE_DEVICE__)
	pci_devfn_t dev = PCI_BDF(dev_uart);
#else
	const struct device *dev = dev_uart;
#endif

	base = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xFFF;
	if (!base)
		return false;

	if ((pci_read_config16(dev, PCI_COMMAND) & UART_PCI_ENABLE)
	    != UART_PCI_ENABLE)
		return false;

	return !lpss_is_controller_in_reset(base);
}

static void uart_configure_gpio_pads(void)
{
	int index = uart_get_valid_index();

	if (index != UART_CONSOLE_INVALID_INDEX)
		gpio_configure_pads(uart_gpio_pads[index].gpios,
				MAX_GPIO_PAD_PER_UART);
}

void uart_bootblock_init(void)
{
	const struct device *dev_uart;

	dev_uart = uart_get_device();

	if (!dev_uart)
		return;

	/* Program UART BAR0, command, reset and clock register */
	uart_common_init(dev_uart, CONFIG_CONSOLE_UART_BASE_ADDRESS);

	/* Configure the 2 pads per UART. */
	uart_configure_gpio_pads();
}

#if ENV_RAMSTAGE

static void uart_read_resources(struct device *dev)
{
	pci_dev_read_resources(dev);

	/* Set the configured UART base address for the debug port */
	if (CONFIG(INTEL_LPSS_UART_FOR_CONSOLE) &&
	    uart_is_debug_controller(dev)) {
		struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
		/* Need to set the base and size for the resource allocator. */
		res->base = CONFIG_CONSOLE_UART_BASE_ADDRESS;
		res->size = 0x1000;
		res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
				IORESOURCE_FIXED;
	}
}

/*
 * Check if UART debug port controller needs to be initialized on resume.
 *
 * Returns:
 * true = when SoC wants debug port initialization on resume
 * false = otherwise
 */
static bool pch_uart_init_debug_controller_on_resume(void)
{
	struct global_nvs *gnvs = acpi_get_gnvs();

	if (gnvs)
		return !!gnvs->uior;

	return false;
}

bool uart_is_debug_controller(struct device *dev)
{
	return dev == uart_get_device();
}

/*
 * This is a workaround to enable UART controller for the debug port if:
 * 1. CONSOLE_SERIAL is not enabled in coreboot, and
 * 2. This boot is S3 resume, and
 * 3. SoC wants to initialize debug UART controller.
 *
 * This workaround is required because Linux kernel hangs on resume if console
 * is not enabled in coreboot, but it is enabled in kernel and not suspended.
 */
static bool uart_controller_needs_init(struct device *dev)
{
	/*
	 * If coreboot has CONSOLE_SERIAL enabled, the skip re-initializing
	 * controller here.
	 */
	if (CONFIG(CONSOLE_SERIAL))
		return false;

	/* If this device does not correspond to debug port, then skip. */
	if (!uart_is_debug_controller(dev))
		return false;

	/* Initialize UART controller only on S3 resume. */
	if (!acpi_is_wakeup_s3())
		return false;

	/*
	 * check if SOC wants to initialize UART on resume
	 */
	return pch_uart_init_debug_controller_on_resume();
}

static void uart_common_enable_resources(struct device *dev)
{
	pci_dev_enable_resources(dev);

	if (uart_controller_needs_init(dev)) {
		uintptr_t base;

		base = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & ~0xFFF;
		if (base)
			uart_lpss_init(dev, base);
	}
}

static void uart_acpi_write_irq(const struct device *dev)
{
	struct acpi_irq irq;

	switch (dev->path.pci.devfn) {
	case PCH_DEVFN_UART0:
		irq = (struct acpi_irq)ACPI_IRQ_LEVEL_LOW(LPSS_UART0_IRQ);
		break;
	case PCH_DEVFN_UART1:
		irq = (struct acpi_irq)ACPI_IRQ_LEVEL_LOW(LPSS_UART1_IRQ);
		break;
	case PCH_DEVFN_UART2:
		irq = (struct acpi_irq)ACPI_IRQ_LEVEL_LOW(LPSS_UART2_IRQ);
		break;
	default:
		return;
	}

	acpi_device_write_interrupt(&irq);
}

/*
 * Generate an ACPI entry if the device is enabled in devicetree for the ACPI
 * LPSS driver. In this mode the device and vendor ID reads as 0xffff, but the
 * PCI device is still there.
 */
static void uart_fill_ssdt(const struct device *dev)
{
	const char *scope = acpi_device_scope(dev);
	const char *hid = acpi_device_hid(dev);
	struct resource *res;

	/* In ACPI mode the device is "invisible" */
	if (!dev->hidden)
		return;

	if (!scope || !hid)
		return;

	res = probe_resource(dev, PCI_BASE_ADDRESS_0);
	if (!res)
		return;

	/* Scope */
	acpigen_write_scope(scope);

	/* Device */
	acpigen_write_device(acpi_device_name(dev));
	acpigen_write_name_string("_HID", hid);
	/*
	 * Advertise compatibility to Sunrise Point, as the Linux kernel doesn't support
	 * CannonPoint yet...
	 */
	if (strcmp(hid, "INT34B8") == 0)
		acpigen_write_name_string("_CID", "INT3448");
	else if (strcmp(hid, "INT34B9") == 0)
		acpigen_write_name_string("_CID", "INT3449");
	else if (strcmp(hid, "INT34BA") == 0)
		acpigen_write_name_string("_CID", "INT344A");

	acpi_device_write_uid(dev);
	acpigen_write_name_string("_DDN", "LPSS ACPI UART");
	acpigen_write_STA(acpi_device_status(dev));

	/* Resources */
	acpigen_write_name("_CRS");
	acpigen_write_resourcetemplate_header();

	uart_acpi_write_irq(dev);
	acpigen_write_mem32fixed(1, res->base, res->size);

	acpigen_write_resourcetemplate_footer();

	acpigen_pop_len(); /* Device */
	acpigen_pop_len(); /* Scope */
}

static const char *uart_acpi_hid(const struct device *dev)
{
	switch (dev->device) {
	case PCI_DEVICE_ID_INTEL_APL_UART0:
		return "80865abc";
	case PCI_DEVICE_ID_INTEL_APL_UART1:
		return "80865abe";
	case PCI_DEVICE_ID_INTEL_APL_UART2:
		return "80865ac0";
	case PCI_DEVICE_ID_INTEL_GLK_UART0:
		return  "808631bc";
	case PCI_DEVICE_ID_INTEL_GLK_UART1:
		return  "808631be";
	case PCI_DEVICE_ID_INTEL_GLK_UART2:
		return  "808631c0";
	case PCI_DEVICE_ID_INTEL_GLK_UART3:
		return  "808631ee";
	case PCI_DEVICE_ID_INTEL_SPT_UART0:
	case PCI_DEVICE_ID_INTEL_SPT_H_UART0:
		return "INT3448";
	case PCI_DEVICE_ID_INTEL_SPT_UART1:
	case PCI_DEVICE_ID_INTEL_SPT_H_UART1:
		return "INT3449";
	case PCI_DEVICE_ID_INTEL_SPT_UART2:
	case PCI_DEVICE_ID_INTEL_SPT_H_UART2:
		return "INT344A";
	case PCI_DEVICE_ID_INTEL_CNP_H_UART0:
		return "INT34B8";
	case PCI_DEVICE_ID_INTEL_CNP_H_UART1:
		return "INT34B9";
	case PCI_DEVICE_ID_INTEL_CNP_H_UART2:
		return "INT34BA";
	default:
		return NULL;
	}
}

static const char *uart_acpi_name(const struct device *dev)
{
	switch (dev->device) {
	case PCI_DEVICE_ID_INTEL_APL_UART0:
	case PCI_DEVICE_ID_INTEL_GLK_UART0:
	case PCI_DEVICE_ID_INTEL_SPT_UART0:
	case PCI_DEVICE_ID_INTEL_SPT_H_UART0:
	case PCI_DEVICE_ID_INTEL_CNP_H_UART0:
		return "UAR0";
	case PCI_DEVICE_ID_INTEL_APL_UART1:
	case PCI_DEVICE_ID_INTEL_GLK_UART1:
	case PCI_DEVICE_ID_INTEL_SPT_UART1:
	case PCI_DEVICE_ID_INTEL_SPT_H_UART1:
	case PCI_DEVICE_ID_INTEL_CNP_H_UART1:
		return "UAR1";
	case PCI_DEVICE_ID_INTEL_APL_UART2:
	case PCI_DEVICE_ID_INTEL_GLK_UART2:
	case PCI_DEVICE_ID_INTEL_SPT_UART2:
	case PCI_DEVICE_ID_INTEL_SPT_H_UART2:
	case PCI_DEVICE_ID_INTEL_CNP_H_UART2:
		return "UAR2";
	case PCI_DEVICE_ID_INTEL_GLK_UART3:
		return "UAR3";
	default:
		return NULL;
	}
}

static struct device_operations device_ops = {
	.read_resources		= uart_read_resources,
	.set_resources		= pci_dev_set_resources,
	.enable_resources	= uart_common_enable_resources,
	.ops_pci		= &pci_dev_ops_pci,
	.acpi_fill_ssdt		= uart_fill_ssdt,
	.acpi_hid		= uart_acpi_hid,
	.acpi_name		= uart_acpi_name,
};

static const unsigned short pci_device_ids[] = {
	PCI_DEVICE_ID_INTEL_SPT_UART0,
	PCI_DEVICE_ID_INTEL_SPT_UART1,
	PCI_DEVICE_ID_INTEL_SPT_UART2,
	PCI_DEVICE_ID_INTEL_SPT_H_UART0,
	PCI_DEVICE_ID_INTEL_SPT_H_UART1,
	PCI_DEVICE_ID_INTEL_SPT_H_UART2,
	PCI_DEVICE_ID_INTEL_KBP_H_UART0,
	PCI_DEVICE_ID_INTEL_KBP_H_UART1,
	PCI_DEVICE_ID_INTEL_KBP_H_UART2,
	PCI_DEVICE_ID_INTEL_APL_UART0,
	PCI_DEVICE_ID_INTEL_APL_UART1,
	PCI_DEVICE_ID_INTEL_APL_UART2,
	PCI_DEVICE_ID_INTEL_APL_UART3,
	PCI_DEVICE_ID_INTEL_CNL_UART0,
	PCI_DEVICE_ID_INTEL_CNL_UART1,
	PCI_DEVICE_ID_INTEL_CNL_UART2,
	PCI_DEVICE_ID_INTEL_GLK_UART0,
	PCI_DEVICE_ID_INTEL_GLK_UART1,
	PCI_DEVICE_ID_INTEL_GLK_UART2,
	PCI_DEVICE_ID_INTEL_GLK_UART3,
	PCI_DEVICE_ID_INTEL_CNP_H_UART0,
	PCI_DEVICE_ID_INTEL_CNP_H_UART1,
	PCI_DEVICE_ID_INTEL_CNP_H_UART2,
	PCI_DEVICE_ID_INTEL_ICP_UART0,
	PCI_DEVICE_ID_INTEL_ICP_UART1,
	PCI_DEVICE_ID_INTEL_ICP_UART2,
	PCI_DEVICE_ID_INTEL_CMP_UART0,
	PCI_DEVICE_ID_INTEL_CMP_UART1,
	PCI_DEVICE_ID_INTEL_CMP_UART2,
	PCI_DEVICE_ID_INTEL_CMP_H_UART0,
	PCI_DEVICE_ID_INTEL_CMP_H_UART1,
	PCI_DEVICE_ID_INTEL_CMP_H_UART2,
	PCI_DEVICE_ID_INTEL_TGP_UART0,
	PCI_DEVICE_ID_INTEL_TGP_UART1,
	PCI_DEVICE_ID_INTEL_TGP_UART2,
	PCI_DEVICE_ID_INTEL_MCC_UART0,
	PCI_DEVICE_ID_INTEL_MCC_UART1,
	PCI_DEVICE_ID_INTEL_MCC_UART2,
	PCI_DEVICE_ID_INTEL_JSP_UART0,
	PCI_DEVICE_ID_INTEL_JSP_UART1,
	PCI_DEVICE_ID_INTEL_JSP_UART2,
	PCI_DEVICE_ID_INTEL_ADP_S_UART0,
	PCI_DEVICE_ID_INTEL_ADP_S_UART1,
	PCI_DEVICE_ID_INTEL_ADP_S_UART2,
	PCI_DEVICE_ID_INTEL_ADP_S_UART3,
	PCI_DEVICE_ID_INTEL_ADP_S_UART4,
	PCI_DEVICE_ID_INTEL_ADP_S_UART5,
	PCI_DEVICE_ID_INTEL_ADP_S_UART6,
	PCI_DEVICE_ID_INTEL_ADP_P_UART0,
	PCI_DEVICE_ID_INTEL_ADP_P_UART1,
	PCI_DEVICE_ID_INTEL_ADP_P_UART2,
	PCI_DEVICE_ID_INTEL_ADP_P_UART3,
	PCI_DEVICE_ID_INTEL_ADP_P_UART4,
	PCI_DEVICE_ID_INTEL_ADP_P_UART5,
	PCI_DEVICE_ID_INTEL_ADP_P_UART6,
	0,
};

static const struct pci_driver pch_uart __pci_driver = {
	.ops		= &device_ops,
	.vendor		= PCI_VENDOR_ID_INTEL,
	.devices	= pci_device_ids,
};

static void uart_enable(struct device *dev)
{
	struct soc_intel_common_block_uart_config *conf = dev->chip_info;
	dev->ops = &device_ops;
	dev->device = conf ? conf->devid : 0;
}

struct chip_operations soc_intel_common_block_uart_ops = {
	CHIP_NAME("LPSS UART in ACPI mode")
	.enable_dev = uart_enable
};

#endif /* ENV_RAMSTAGE */