path: root/src/soc/intel/common/block/cse/Kconfig

config DISABLE_HECI1_AT_PRE_BOOT
	bool "Disable HECI1 at the end of boot"
	depends on SOC_INTEL_COMMON_BLOCK_CSE
	default n
	help
	  This config decides the state of HECI1(CSE) device at the end of boot.
	  Mainboard users to select this config to make HECI1 `function disable`
	  prior to handing off to payload.

config MAX_HECI_DEVICES
	int
	default 6

config SOC_INTEL_COMMON_BLOCK_CSE
	bool
	default n
	help
	  Driver for communication with Converged Security Engine (CSE)
	  over Host Embedded Controller Interface (HECI)

config SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_SBI
	bool
	default y if HECI_DISABLE_USING_SMM
	select SOC_INTEL_COMMON_BLOCK_P2SB
	help
	  Use this config to allow common CSE block to make HECI1 function disable
	  in the SMM mode. From CNL PCH onwards,`HECI1` disabling can only be done
	  using the non-posted sideband write after FSP-S sets the postboot_sai
	  attribute.

config SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PMC_IPC
	bool
	default n
	select SOC_INTEL_COMMON_BLOCK_PMC
	help
	  Use this config to allow common CSE block to make HECI1 function disable
	  using PMC IPC command `0xA9`. From TGL PCH onwards, disabling heci1
	  device using PMC IPC doesn't required to run the operation in SMM.

config SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR
	bool
	default n
	select SOC_INTEL_COMMON_BLOCK_PCR
	help
	  Use this config for SoC platform prior to CNL PCH (with postboot_sai implemented)
	  to make `HECI1` device disable using private configuration register (PCR) write.

config SOC_INTEL_STORE_CSE_FW_VERSION
	bool
	default y
	depends on SOC_INTEL_CSE_LITE_SKU
	help
	  This configuration option stores CSE RW FW version in CBMEM area.
	  This information can be used to identify if the CSE firmware update is successful
	  by comparing the currently running CSE RW firmware version against CSE version
	  belongs to the CONFIG_SOC_INTEL_CSE_RW_VERSION (decided statically while
	  building the AP FW image).

	  The way to retrieve the CSE firmware version is by sending the HECI command to
	  read the CSE Boot Partition (BP) info. The cost of sending HECI command to read
	  the CSE FW version is between 7ms-20ms (depending on the SoC architecture) hence,
	  ensure this feature is platform specific and only enabled for the platform
	  that would like to store the CSE version into the CBMEM.

config SOC_INTEL_CSE_FW_PARTITION_CMOS_OFFSET
	int
	default 68
	depends on SOC_INTEL_CSE_LITE_SKU
	help
	  This configuration option stores the starting offset of cse fw partition versions in
	  CMOS memory. The offset should be byte aligned and must leave enough memory to store
	  required firmware partition versions.

config SOC_INTEL_STORE_ISH_FW_VERSION
	bool
	default n
	depends on DRIVERS_INTEL_ISH
	help
	  This configuration option stores ISH version in CBMEM area.
	  This information can be used to identify the currently running ISH firmware
	  version.

	  ISH BUP is sitting inside the CSE firmware partition. The way to retrieve the
	  ISH version is by sending the HECI command to read the CSE FPT. The cost of sending
	  HECI command to read the CSE FPT is significant (~200ms) hence, the idea is to
	  read the CSE RW version on every cold reset (to cover the CSE update scenarios)
	  and store into CBMEM to avoid the cost of resending the HECI command in all
	  consecutive warm boots.

	  Later boot stages can just read the CBMEM ID to retrieve the ISH version.

	  Additionally, ensure this feature is platform specific hence, only enabled
	  for the platform that would like to store the ISH version into the CBMEM and
	  parse to perform some additional work.

config SOC_INTEL_CSE_SEND_EOP_EARLY
	bool "CSE send EOP early"
	depends on SOC_INTEL_COMMON_BLOCK_CSE
	help
	  Use this config to send End Of Post (EOP) earlier through SoC code in order to
	  reduce time required to send EOP and getting CSE response.
	  In later stages, CSE might be busy and might require more time to process EOP command.
	  SoC can use this Kconfig to send EOP earlier by itself.

config SOC_INTEL_CSE_SEND_EOP_LATE
	bool
	depends on SOC_INTEL_COMMON_BLOCK_CSE
	help
	  Use this config to send End Of Post (EOP) late (even after CSE `final` operation)
	  using boot state either `BS_PAYLOAD_BOOT` or `BS_PAYLOAD_LOAD` from common code
	  in order to reduce time required to send EOP and getting CSE response.
	  It has been observed that CSE might be busy and might require more time to
	  process the EOP command.
	  SoC can use this Kconfig to send EOP later by itself.
	  Starting with Jasper Lake, coreboot sends EOP before loading payload hence, this
	  config is applicable for those platforms.

config SOC_INTEL_CSE_SEND_EOP_ASYNC
	bool
	depends on SOC_INTEL_COMMON_BLOCK_CSE
	depends on !SOC_INTEL_CSE_SEND_EOP_LATE
	depends on !SOC_INTEL_CSE_SEND_EOP_EARLY
	help
	  Use this config to handle End Of Post (EOP) completion
	  asynchronously. The EOP command is sent first and the result
	  is checked later leaving time to CSE to complete the
	  operation while coreboot perform other activities.
	  Performing EOP asynchronously reduces the time spent
	  actively waiting for command completion which can have a
	  significant impact on boot time.

	  Using this asynchronous approach comes with the limitation
	  that no HECI command should be sent between the time the EOP
	  request is posted (at CSE .final device operation) and the
	  time coreboot check for its completion (BS_PAYLOAD_LOAD).

config SOC_INTEL_CSE_LITE_SKU
	bool
	default n
	help
	 Enables CSE Lite SKU

config SOC_INTEL_CSE_LITE_PSR
	bool
	default n
	depends on SOC_INTEL_CSE_LITE_SKU
	help
	 Select this config if Platform Service Record(PSR) is supported by the platform. This
	 config is applicable only for Lite SKU, where PSR data backup is required prior to a
	 CSE firmware downgrade during which CSE data is cleared.

config SOC_INTEL_CSE_SERVER_SKU
	bool
	default n
	help
	  Enables CSE Server SKU

config SOC_INTEL_CSE_RW_UPDATE
	bool "Enable the CSE RW Update Feature"
	default n
	depends on SOC_INTEL_CSE_LITE_SKU
	help
	 This config will enable CSE RW firmware update feature and also will be used ensure
	 all the required configs are provided by mainboard.

config SOC_INTEL_CSE_FMAP_NAME
	string "Name of CSE Region in FMAP" if SOC_INTEL_CSE_RW_UPDATE
	default "SI_ME"
	help
	 Name of CSE region in FMAP

config SOC_INTEL_CSE_RW_A_FMAP_NAME
	string "Location of CSE RW A in FMAP" if SOC_INTEL_CSE_RW_UPDATE
	default "ME_RW_A"
	help
	 Name of CSE RW A region in FMAP

config SOC_INTEL_CSE_RW_B_FMAP_NAME
	string "Location of CSE RW B in FMAP" if SOC_INTEL_CSE_RW_UPDATE
	default "ME_RW_B"
	help
	 Name of CSE RW B region in FMAP

config SOC_INTEL_CSE_RW_CBFS_NAME
	string "CBFS entry name for CSE RW blob" if SOC_INTEL_CSE_RW_UPDATE
	default "me_rw"
	help
	 CBFS entry name for Intel CSE CBFS RW blob

config SOC_INTEL_CSE_RW_HASH_CBFS_NAME
	string "CBFS name for CSE RW hash file" if SOC_INTEL_CSE_RW_UPDATE
	default "me_rw.hash"
	help
	 CBFS name for Intel CSE CBFS RW hash file

config SOC_INTEL_CSE_RW_VERSION_CBFS_NAME
	string "CBFS name for CSE RW version file" if SOC_INTEL_CSE_RW_UPDATE
	default "me_rw.version"
	help
	 CBFS name for Intel CSE CBFS RW version file

config SOC_INTEL_CSE_RW_FILE
	string "Intel CSE CBFS RW path and filename" if SOC_INTEL_CSE_RW_UPDATE && !STITCH_ME_BIN
	default ""
	help
	 Intel CSE CBFS RW blob path and file name

config SOC_INTEL_CSE_RW_VERSION
	string "Intel CSE RW firmware version" if SOC_INTEL_CSE_RW_UPDATE
	default ""
	help
	 This config contains the Intel CSE RW version of the blob that is provided by
	 SOC_INTEL_CSE_RW_FILE config and the version must be set in the format
	 major.minor.hotfix.build (ex: 14.0.40.1209).

config SOC_INTEL_CSE_SET_EOP
	bool
	default n
	select PMC_IPC_ACPI_INTERFACE
	help
	  This config ensures coreboot will send the CSE the End-of-POST message
	  just prior to loading the payload. This is a security feature so the
	  CSE will no longer respond to Pre-Boot commands.

config SOC_INTEL_CSE_SUB_PART_UPDATE
	bool "Enable the CSE sub-partition update Feature"
	default n
	depends on SOC_INTEL_CSE_LITE_SKU
	help
	 This config will enable CSE sub-partition firmware update feature and also will be used ensure
	 all the required configs are provided by mainboard.

config SOC_INTEL_CSE_IOM_CBFS_NAME
	string "CBFS name for CSE sub-partition IOM binary" if SOC_INTEL_CSE_SUB_PART_UPDATE
	default "cse_iom"
	help
	 CBFS entry name for Intel CSE sub-partition IOM binary

config SOC_INTEL_CSE_IOM_CBFS_FILE
	string "Intel CBFS path and file name for CSE sub-partition IOM binary" if SOC_INTEL_CSE_SUB_PART_UPDATE
	default ""
	help
	 CBFS path and file name for Intel CSE sub-partition IOM binary

config SOC_INTEL_CSE_NPHY_CBFS_NAME
	string "CBFS name for CSE sub-partition NPHY binary" if SOC_INTEL_CSE_SUB_PART_UPDATE
	default "cse_nphy"
	help
	 CBFS entry name for Intel CSE sub-partition NPHY binary

config SOC_INTEL_CSE_NPHY_CBFS_FILE
	string "Intel CBFS path and file name for CSE sub-partition NPHY binary" if SOC_INTEL_CSE_SUB_PART_UPDATE
	default ""
	help
	 CBFS path and file name for Intel CSE sub-partition NPHY binary

config SOC_INTEL_CSE_LITE_COMPRESS_ME_RW
	bool
	default n
	depends on SOC_INTEL_CSE_LITE_SKU
	select CBFS_ALLOW_UNVERIFIED_DECOMPRESSION if CBFS_VERIFICATION && !VBOOT_CBFS_INTEGRATION
	help
	 Enable compression on Intel CSE CBFS RW blob

config SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY
	def_bool n
	depends on SOC_INTEL_CSE_LITE_SKU
	help
	  Mainboard user to select this Kconfig in order to capture pre-cpu
	  reset boot performance telemetry data.

config SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY_V1
	bool
	select SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY
	help
	  This config will make mainboard use version 1 of the CSE timestamp
	  definitions, it can be used for Alder Lake and Raptor Lake (all SKUs).

config SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY_V2
	bool
	select SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY
	help
	  This config will make mainboard use version 2 of the CSE timestamp
	  definitions, it can be used for Meteor Lake M/P.

config SOC_INTEL_CSE_LITE_SYNC_IN_ROMSTAGE
	bool
	default !SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE
	depends on SOC_INTEL_CSE_LITE_SKU && !SOC_INTEL_CSE_LITE_COMPRESS_ME_RW
	help
	 Use default flow of CSE FW Update in romstage when uncompressed ME_RW blobs are used.

config SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE
	bool
	default n
	help
	 Use this option if CSE RW update needs to be triggered during RAMSTAGE.

config SOC_INTEL_CSE_HAVE_SPEC_SUPPORT
	bool
	depends on SOC_INTEL_COMMON_BLOCK_CSE
	default n
	help
	 This option config will allow SoC platform to use applicable ME specification.
	 The version based CSE measured ME specification data structures are defined at
	 common code. Enabling this option will use those CSE defined ME specification
	 for the SoC. User should select pertinent ME spec version along with this option.

config SOC_INTEL_COMMON_BLOCK_ME_SPEC_12
	bool
	select SOC_INTEL_CSE_HAVE_SPEC_SUPPORT
	help
	  This config will enable 'ME specification version 12'. It will ensure ME specific
	  declaration and uses of required data structures for Host firmware status registers.

config SOC_INTEL_COMMON_BLOCK_ME_SPEC_13
	bool
	select SOC_INTEL_CSE_HAVE_SPEC_SUPPORT
	help
	  This config will enable 'ME specification version 13'. It will ensure ME specific
	  declaration and uses of required data structures for Host firmware status registers.

config SOC_INTEL_COMMON_BLOCK_ME_SPEC_15
	bool
	select SOC_INTEL_CSE_HAVE_SPEC_SUPPORT
	help
	  This config will enable 'ME specification version 15'. It will ensure ME specific
	  declaration and uses of required data structures for Host firmware status registers.

config SOC_INTEL_COMMON_BLOCK_ME_SPEC_16
	bool
	select SOC_INTEL_CSE_HAVE_SPEC_SUPPORT
	help
	  This config will enable 'ME specification version 16'. It will ensure ME specific
	  declaration and uses of required data structures for Host firmware status registers.

config SOC_INTEL_COMMON_BLOCK_ME_SPEC_18
	bool
	select SOC_INTEL_CSE_HAVE_SPEC_SUPPORT
	help
	  This config will enable 'ME specification version 18'. It will ensure ME specific
	  declaration and uses of required data structures for Host firmware status registers.

if SOC_INTEL_CSE_HAVE_SPEC_SUPPORT

config ME_SPEC
	int
	default 12 if SOC_INTEL_COMMON_BLOCK_ME_SPEC_12
	default 13 if SOC_INTEL_COMMON_BLOCK_ME_SPEC_13
	default 15 if SOC_INTEL_COMMON_BLOCK_ME_SPEC_15
	default 16 if SOC_INTEL_COMMON_BLOCK_ME_SPEC_16
	default 18 if SOC_INTEL_COMMON_BLOCK_ME_SPEC_18
	help
	  This config holds the ME spec version if defined.

endif # SOC_INTEL_CSE_HAVE_SPEC_SUPPORT

if STITCH_ME_BIN

config CSE_COMPONENTS_PATH
	string "Path to directory containing all CSE input components to stitch"
	default "3rdparty/blobs/mainboard/\$(CONFIG_MAINBOARD_DIR)/firmware"
	help
	  This is the file path containing all the input CSE component files.
	  These will be used by cse_serger tool to stitch CSE image.

config CSE_FPT_FILE
	string "Name of CSE FPT file"
	default "cse_fpt.bin"
	help
	  This file is the CSE input binary as released by Intel in a CSE kit.

config CSE_DATA_FILE
	string "Name of CSE data file"
	default "cse_data.bin"
	help
	  This file is the CSE data binary typically generated by Intel FIT tool.

config CSE_NPHY_FILE
	string "Name of NPHY file"
	default "nphy.bin"
	help
	  This file is the NPHY input binary as released by Intel in a CSE kit.

config CSE_BPDT_VERSION
	string
	help
	  This config indicates the BPDT version used by CSE for a given SoC.

endif

config CSE_RESET_CLEAR_EC_AP_IDLE_FLAG
	bool
	default y if !SYSTEM_TYPE_LAPTOP
	help
	  Select this if the variant is a Chromebox/base. This allows AP to direct EC
	  to clear AP_IDLE flag before triggering reset to make sure AP can boot up
	  after reset.