blob: 01329bf9b1199510fce3357ec1c26f440df5ab1a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bootblock_common.h>
#include <cpu/x86/mtrr.h>
#include <intelblocks/fast_spi.h>
#include <intelblocks/gpio.h>
#include <intelblocks/gspi.h>
#include <intelblocks/systemagent.h>
#include <intelblocks/tco.h>
#include <intelblocks/uart.h>
#include <soc/bootblock.h>
#include <soc/iomap.h>
#include <soc/pch.h>
#if CONFIG(FSP_CAR)
#include <FsptUpd.h>
const FSPT_UPD temp_ram_init_params = {
.FspUpdHeader = {
.Signature = 0x545F4450554C4643ULL, /* 'CFLUPD_T' */
.Revision = 1,
.Reserved = {0},
},
.FsptCoreUpd = {
/*
* It is a requirement for firmware to have Firmware Interface Table
* (FIT), which contains pointers to each microcode update.
* The microcode update is loaded for all logical processors before
* cpu reset vector.
*
* All SoC since Gen-4 has above mechanism in place to load microcode
* even before hitting CPU reset vector. Hence skipping FSP-T loading
* microcode after CPU reset by passing '0' value to
* FSPT_UPD.MicrocodeRegionBase and FSPT_UPD.MicrocodeRegionSize.
*
* Note: CodeRegionSize must be smaller than or equal to 16MiB to not
* overlap with LAPIC or the CAR area at 0xfef00000.
*/
.MicrocodeRegionBase = 0,
.MicrocodeRegionSize = 0,
.CodeRegionBase = (uint32_t)0x100000000ULL - CACHE_ROM_SIZE,
.CodeRegionSize = (uint32_t)CACHE_ROM_SIZE,
},
};
#endif
asmlinkage void bootblock_c_entry(uint64_t base_timestamp)
{
/* Call lib/bootblock.c main */
bootblock_main_with_basetime(base_timestamp);
}
void bootblock_soc_early_init(void)
{
bootblock_systemagent_early_init();
bootblock_pch_early_init();
fast_spi_cache_bios_region();
pch_early_iorange_init();
if (CONFIG(INTEL_LPSS_UART_FOR_CONSOLE))
uart_bootblock_init();
}
void bootblock_soc_init(void)
{
report_platform_info();
bootblock_pch_init();
/* Program TCO_BASE_ADDRESS and TCO Timer Halt */
tco_configure();
}
|
