1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <acpi/acpi_gnvs.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <device/mmio.h>
#include <soc/adsp.h>
#include <soc/device_nvs.h>
#include <soc/pch.h>
#include <soc/rcba.h>
#include <soc/intel/broadwell/pch/chip.h>
#include <southbridge/intel/lynxpoint/iobp.h>
static void adsp_init(struct device *dev)
{
const struct soc_intel_broadwell_pch_config *config = config_of(dev);
struct resource *bar0, *bar1;
u32 tmp32;
/* Ensure memory and bus master are enabled */
pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
/* Find BAR0 and BAR1 */
bar0 = probe_resource(dev, PCI_BASE_ADDRESS_0);
if (!bar0)
return;
bar1 = probe_resource(dev, PCI_BASE_ADDRESS_1);
if (!bar1)
return;
/*
* Set LTR value in DSP shim LTR control register to 3ms
* SNOOP_REQ[13]=1b SNOOP_SCALE[12:10]=100b (1ms) SNOOP_VAL[9:0]=3h
*/
tmp32 = pch_is_wpt() ? ADSP_SHIM_BASE_WPT : ADSP_SHIM_BASE_LPT;
write32(res2mmio(bar0, tmp32 + ADSP_SHIM_LTRC, 0),
ADSP_SHIM_LTRC_VALUE);
/* Program VDRTCTL2 D19:F0:A8[31:0] = 0x00000fff */
pci_write_config32(dev, ADSP_PCI_VDRTCTL2, ADSP_VDRTCTL2_VALUE);
/* Program ADSP IOBP VDLDAT1 to 0x040100 */
pch_iobp_write(ADSP_IOBP_VDLDAT1, ADSP_VDLDAT1_VALUE);
/* Set D3 Power Gating Enable in D19:F0:A0 based on PCH type */
tmp32 = pci_read_config32(dev, ADSP_PCI_VDRTCTL0);
if (pch_is_wpt()) {
if (config->adsp_d3_pg_enable) {
tmp32 &= ~ADSP_VDRTCTL0_D3PGD_WPT;
if (config->adsp_sram_pg_enable)
tmp32 &= ~ADSP_VDRTCTL0_D3SRAMPGD_WPT;
else
tmp32 |= ADSP_VDRTCTL0_D3SRAMPGD_WPT;
} else {
tmp32 |= ADSP_VDRTCTL0_D3PGD_WPT;
}
} else {
if (config->adsp_d3_pg_enable) {
tmp32 &= ~ADSP_VDRTCTL0_D3PGD_LPT;
if (config->adsp_sram_pg_enable)
tmp32 &= ~ADSP_VDRTCTL0_D3SRAMPGD_LPT;
else
tmp32 |= ADSP_VDRTCTL0_D3SRAMPGD_LPT;
} else {
tmp32 |= ADSP_VDRTCTL0_D3PGD_LPT;
}
}
pci_write_config32(dev, ADSP_PCI_VDRTCTL0, tmp32);
/* Set PSF Snoop to SA, RCBA+0x3350[10]=1b */
RCBA32_OR(0x3350, (1 << 10));
/* Set DSP IOBP PMCTL 0x1e0=0x3f */
pch_iobp_write(ADSP_IOBP_PMCTL, ADSP_PMCTL_VALUE);
if (config->sio_acpi_mode) {
struct device_nvs *dev_nvs = acpi_get_device_nvs();
/* Configure for ACPI mode */
printk(BIOS_INFO, "ADSP: Enable ACPI Mode IRQ3\n");
/* Save BAR0 and BAR1 to ACPI NVS */
dev_nvs->bar0[SIO_NVS_ADSP] = (u32)bar0->base;
dev_nvs->bar1[SIO_NVS_ADSP] = (u32)bar1->base;
dev_nvs->enable[SIO_NVS_ADSP] = 1;
/* Set PCI Config Disable Bit */
pch_iobp_update(ADSP_IOBP_PCICFGCTL, ~0, ADSP_PCICFGCTL_PCICD);
/* Set interrupt de-assert/assert opcode override to IRQ3 */
pch_iobp_write(ADSP_IOBP_VDLDAT2, ADSP_IOBP_ACPI_IRQ3);
/* Enable IRQ3 in RCBA */
RCBA32_OR(ACPIIRQEN, ADSP_ACPI_IRQEN);
/* Set ACPI Interrupt Enable Bit */
pch_iobp_update(ADSP_IOBP_PCICFGCTL, ~ADSP_PCICFGCTL_SPCBAD,
ADSP_PCICFGCTL_ACPIIE);
/* Put ADSP in D3hot */
tmp32 = read32(res2mmio(bar1, PCH_PCS, 0));
tmp32 |= PCH_PCS_PS_D3HOT;
write32(res2mmio(bar1, PCH_PCS, 0), tmp32);
} else {
printk(BIOS_INFO, "ADSP: Enable PCI Mode IRQ23\n");
/* Configure for PCI mode */
pci_write_config8(dev, PCI_INTERRUPT_LINE, ADSP_PCI_IRQ);
/* Clear ACPI Interrupt Enable Bit */
pch_iobp_update(ADSP_IOBP_PCICFGCTL,
~(ADSP_PCICFGCTL_SPCBAD | ADSP_PCICFGCTL_ACPIIE), 0);
}
}
static struct device_operations adsp_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = adsp_init,
.ops_pci = &pci_dev_ops_pci,
};
static const unsigned short pci_device_ids[] = {
0x9c36, /* LynxPoint */
0x9cb6, /* WildcatPoint */
0
};
static const struct pci_driver pch_adsp __pci_driver = {
.ops = &adsp_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.devices = pci_device_ids,
};
|
