blob: f559410c57fc688b2f66a4cc0ad10a00940cf748 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef _SOC_INTEL_BROADWELL_CHIP_H_
#define _SOC_INTEL_BROADWELL_CHIP_H_
#include <drivers/intel/gma/i915.h>
#include <intelblocks/cfg.h>
#include <stdint.h>
struct soc_intel_broadwell_config {
/* GPE configuration */
uint32_t gpe0_en_1;
uint32_t gpe0_en_2;
uint32_t gpe0_en_3;
uint32_t gpe0_en_4;
/* GPIO SMI configuration */
uint32_t alt_gp_smi_en;
/* IDE configuration */
uint8_t sata_port_map;
uint32_t sata_port0_gen3_tx;
uint32_t sata_port1_gen3_tx;
uint32_t sata_port2_gen3_tx;
uint32_t sata_port3_gen3_tx;
uint32_t sata_port0_gen3_dtle;
uint32_t sata_port1_gen3_dtle;
uint32_t sata_port2_gen3_dtle;
uint32_t sata_port3_gen3_dtle;
/*
* SATA DEVSLP Mux
* 0 = port 0 DEVSLP on DEVSLP0/GPIO33
* 1 = port 3 DEVSLP on DEVSLP0/GPIO33
*/
uint8_t sata_devslp_mux;
/*
* DEVSLP Disable
* 0: DEVSLP is enabled
* 1: DEVSLP is disabled
*/
uint8_t sata_devslp_disable;
/* Generic IO decode ranges */
uint32_t gen1_dec;
uint32_t gen2_dec;
uint32_t gen3_dec;
uint32_t gen4_dec;
/* Enable linear PCIe Root Port function numbers starting at zero */
uint8_t pcie_port_coalesce;
/* Force root port ASPM configuration with port bitmap */
uint8_t pcie_port_force_aspm;
/* Put SerialIO devices into ACPI mode instead of a PCI device */
uint8_t sio_acpi_mode;
/* I2C voltage select: 0=3.3V 1=1.8V */
uint8_t sio_i2c0_voltage;
uint8_t sio_i2c1_voltage;
/* Enable ADSP power gating features */
uint8_t adsp_d3_pg_enable;
uint8_t adsp_sram_pg_enable;
/*
* Clock Disable Map:
* [21:16] = CLKOUT_PCIE# 5-0
* [24] = CLKOUT_ITPXDP
*/
uint32_t icc_clock_disable;
/*
* Digital Port Hotplug Enable:
* 0x04 = Enabled, 2ms short pulse
* 0x05 = Enabled, 4.5ms short pulse
* 0x06 = Enabled, 6ms short pulse
* 0x07 = Enabled, 100ms short pulse
*/
u8 gpu_dp_b_hotplug;
u8 gpu_dp_c_hotplug;
u8 gpu_dp_d_hotplug;
/* Panel power sequence timings */
u8 gpu_panel_power_cycle_delay;
u16 gpu_panel_power_up_delay;
u16 gpu_panel_power_down_delay;
u16 gpu_panel_power_backlight_on_delay;
u16 gpu_panel_power_backlight_off_delay;
/* Panel backlight settings */
unsigned int gpu_pch_backlight_pwm_hz;
enum {
GPU_BACKLIGHT_POLARITY_HIGH = 0,
GPU_BACKLIGHT_POLARITY_LOW,
} gpu_pch_backlight_polarity;
/*
* Graphics CD Clock Frequency
* 0 = 337.5MHz
* 1 = 450MHz
* 2 = 540MHz
* 3 = 675MHz
*/
int cdclk;
struct i915_gpu_controller_info gfx;
/* Enable S0iX support */
int s0ix_enable;
/*
* Minimum voltage for C6/C7 state:
* 0x67 = 1.6V (full swing)
* ...
* 0x79 = 1.7V
* ...
* 0x83 = 1.8V (no swing)
*/
int vr_cpu_min_vid;
/*
* Set slow VR ramp rate on C-state exit:
* 0 = Fast VR ramp rate / 2
* 1 = Fast VR ramp rate / 4
* 2 = Fast VR ramp rate / 8
* 3 = Fast VR ramp rate / 16
*/
int vr_slow_ramp_rate_set;
/* Enable slow VR ramp rate */
int vr_slow_ramp_rate_enable;
/* Deep SX enable */
int deep_sx_enable_ac;
int deep_sx_enable_dc;
/* TCC activation offset */
int tcc_offset;
};
typedef struct soc_intel_broadwell_config config_t;
#endif
|
