1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <arch/bootblock.h>
#include <device/pci_ops.h>
#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/pci_devs.h>
#include <soc/rcba.h>
#include <soc/spi.h>
#include <reg_script.h>
#include <soc/pm.h>
#include <soc/romstage.h>
#include <southbridge/intel/common/early_spi.h>
static void map_rcba(void)
{
pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1);
}
static void enable_port80_on_lpc(void)
{
/* Enable port 80 POST on LPC. The chipset does this by default,
* but it doesn't appear to hurt anything. */
u32 gcs = RCBA32(GCS);
gcs = gcs & ~0x4;
RCBA32(GCS) = gcs;
}
static void set_spi_speed(void)
{
u32 fdod;
u8 ssfc;
/* Observe SPI Descriptor Component Section 0 */
SPIBAR32(SPIBAR_FDOC) = 0x1000;
/* Extract the Write/Erase SPI Frequency from descriptor */
fdod = SPIBAR32(SPIBAR_FDOD);
fdod >>= 24;
fdod &= 7;
/* Set Software Sequence frequency to match */
ssfc = SPIBAR8(SPIBAR_SSFC + 2);
ssfc &= ~7;
ssfc |= fdod;
SPIBAR8(SPIBAR_SSFC + 2) = ssfc;
}
const struct reg_script pch_early_init_script[] = {
/* Setup southbridge BARs */
REG_PCI_WRITE32(RCBA, RCBA_BASE_ADDRESS | 1),
REG_PCI_WRITE32(PMBASE, ACPI_BASE_ADDRESS | 1),
REG_PCI_WRITE8(ACPI_CNTL, ACPI_EN),
REG_PCI_WRITE32(GPIO_BASE, GPIO_BASE_ADDRESS | 1),
REG_PCI_WRITE8(GPIO_CNTL, GPIO_EN),
/* Set COM1/COM2 decode range */
REG_PCI_WRITE16(LPC_IO_DEC, 0x0010),
/* Enable legacy decode ranges */
REG_PCI_WRITE16(LPC_EN, CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN |
COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN),
/* Enable IOAPIC */
REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + OIC, 0x0100),
/* Read back for posted write */
REG_MMIO_READ16(RCBA_BASE_ADDRESS + OIC),
/* Set HPET address and enable it */
REG_MMIO_RMW32(RCBA_BASE_ADDRESS + HPTC, ~3, (1 << 7)),
/* Read back for posted write */
REG_MMIO_READ32(RCBA_BASE_ADDRESS + HPTC),
/* Enable HPET to start counter */
REG_MMIO_OR32(HPET_BASE_ADDRESS + 0x10, (1 << 0)),
/* Disable reset */
REG_MMIO_OR32(RCBA_BASE_ADDRESS + GCS, (1 << 5)),
/* TCO timer halt */
REG_IO_OR16(ACPI_BASE_ADDRESS + TCO1_CNT, TCO_TMR_HLT),
/* Enable upper 128 bytes of CMOS */
REG_MMIO_OR32(RCBA_BASE_ADDRESS + RC, (1 << 2)),
/* Disable unused device (always) */
REG_MMIO_OR32(RCBA_BASE_ADDRESS + FD, PCH_DISABLE_ALWAYS),
REG_SCRIPT_END
};
static void pch_early_lpc(void)
{
reg_script_run_on_dev(PCH_DEV_LPC, pch_early_init_script);
}
void bootblock_early_southbridge_init(void)
{
map_rcba();
enable_spi_prefetching_and_caching();
enable_port80_on_lpc();
set_spi_speed();
pch_early_lpc();
}
|
