1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <acpi/acpi_gnvs.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <reg_script.h>
#include <soc/iomap.h>
#include <soc/iosf.h>
#include <soc/lpc.h>
#include <soc/device_nvs.h>
#include <soc/pattrs.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include <soc/ramstage.h>
#include "chip.h"
/*
* The LPE audio devices needs 1MiB of memory reserved aligned to a 512MiB
* address. Just take 1MiB @ 512MiB.
*/
#define FIRMWARE_PHYS_BASE (512 << 20)
#define FIRMWARE_PHYS_LENGTH (2 << 20)
#define FIRMWARE_PCI_REG_BASE 0xa8
#define FIRMWARE_PCI_REG_LENGTH 0xac
#define FIRMWARE_REG_BASE_C0 0x144000
#define FIRMWARE_REG_LENGTH_C0 (FIRMWARE_REG_BASE_C0 + 4)
static void assign_device_nvs(struct device *dev, u32 *field,
unsigned int index)
{
struct resource *res;
res = probe_resource(dev, index);
if (res)
*field = res->base;
}
static void lpe_enable_acpi_mode(struct device *dev)
{
static const struct reg_script ops[] = {
/* Disable PCI interrupt, enable Memory and Bus Master */
REG_PCI_OR16(PCI_COMMAND,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INT_DISABLE),
/* Enable ACPI mode */
REG_IOSF_OR(IOSF_PORT_0x58, LPE_PCICFGCTR1,
LPE_PCICFGCTR1_PCI_CFG_DIS | LPE_PCICFGCTR1_ACPI_INT_EN),
REG_SCRIPT_END
};
struct device_nvs *dev_nvs = acpi_get_device_nvs();
/* Save BAR0, BAR1, and firmware base to ACPI NVS */
assign_device_nvs(dev, &dev_nvs->lpe_bar0, PCI_BASE_ADDRESS_0);
assign_device_nvs(dev, &dev_nvs->lpe_bar1, PCI_BASE_ADDRESS_2);
assign_device_nvs(dev, &dev_nvs->lpe_fw, FIRMWARE_PCI_REG_BASE);
/* Device is enabled in ACPI mode */
dev_nvs->lpe_en = 1;
/* Put device in ACPI mode */
reg_script_run_on_dev(dev, ops);
}
static void setup_codec_clock(struct device *dev)
{
uint32_t reg;
u32 *clk_reg;
struct soc_intel_braswell_config *config;
const char *freq_str;
config = config_of(dev);
switch (config->lpe_codec_clk_src) {
case LPE_CLK_SRC_XTAL:
/* XTAL driven bit2=0 */
freq_str = "19.2MHz External Crystal";
reg = CLK_SRC_XTAL;
break;
case LPE_CLK_SRC_PLL:
/* PLL driven bit2=1 */
freq_str = "19.2MHz PLL";
reg = CLK_SRC_PLL;
break;
default:
reg = CLK_SRC_XTAL;
printk(BIOS_DEBUG, "LPE codec clock default to using Crystal\n");
return;
}
/* Default to always running. */
reg |= CLK_CTL_ON;
printk(BIOS_DEBUG, "LPE Audio codec clock set to %sMHz.\n", freq_str);
clk_reg = (u32 *)(PMC_BASE_ADDRESS + PLT_CLK_CTL_0);
write32(clk_reg, (read32(clk_reg) & ~0x7) | reg);
}
static void lpe_stash_firmware_info(struct device *dev)
{
struct resource *res;
struct resource *mmio;
res = probe_resource(dev, FIRMWARE_PCI_REG_BASE);
if (res == NULL) {
printk(BIOS_DEBUG, "LPE Firmware memory not found.\n");
return;
}
printk(BIOS_DEBUG, "LPE FW Resource: 0x%08x\n", (u32) res->base);
/* Continue using old way of informing firmware address / size. */
pci_write_config32(dev, FIRMWARE_PCI_REG_BASE, res->base);
pci_write_config32(dev, FIRMWARE_PCI_REG_LENGTH, res->size);
/* Also put the address in MMIO space like on C0 BTM */
mmio = find_resource(dev, PCI_BASE_ADDRESS_0);
write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0), res->base);
write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0), res->size);
}
static void lpe_init(struct device *dev)
{
struct soc_intel_braswell_config *config = config_of(dev);
lpe_stash_firmware_info(dev);
setup_codec_clock(dev);
if (config->lpe_acpi_mode)
lpe_enable_acpi_mode(dev);
}
static void lpe_read_resources(struct device *dev)
{
struct resource *res;
pci_dev_read_resources(dev);
/*
* Allocate the BAR1 resource at index 2 to fulfill the Windows driver
* interface requirements even though the PCI device has only one BAR
*/
res = new_resource(dev, PCI_BASE_ADDRESS_2);
res->base = 0;
res->size = 0x1000;
res->limit = 0xffffffff;
res->gran = 12;
res->align = 12;
res->flags = IORESOURCE_MEM;
reserved_ram_resource_kb(dev, FIRMWARE_PCI_REG_BASE, FIRMWARE_PHYS_BASE >> 10,
FIRMWARE_PHYS_LENGTH >> 10);
}
static void lpe_set_resources(struct device *dev)
{
struct resource *res;
res = probe_resource(dev, PCI_BASE_ADDRESS_2);
if (res != NULL)
res->flags |= IORESOURCE_STORED;
pci_dev_set_resources(dev);
}
static const struct device_operations device_ops = {
.read_resources = lpe_read_resources,
.set_resources = lpe_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = lpe_init,
.ops_pci = &soc_pci_ops,
};
static const struct pci_driver southcluster __pci_driver = {
.ops = &device_ops,
.vendor = PCI_VID_INTEL,
.device = LPE_DEVID,
};
|
