1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <arch/io.h>
#include <soc/gpio.h>
#include <soc/pm.h>
#include <device/mmio.h>
#include <soc/iomap.h>
#define SUSPEND_CYCLE 1
#define RESUME_CYCLE 0
#define LPC_FAMILY_NUMBER(gpio_pad) (gpio_pad / MAX_FAMILY_PAD_GPIO_NO)
#define LPC_INTERNAL_PAD_NUM(gpio_pad) (gpio_pad % MAX_FAMILY_PAD_GPIO_NO)
#define LPC_GPIO_OFFSET(gpio_pad) (FAMILY_PAD_REGS_OFF \
+ (FAMILY_PAD_REGS_SIZE * LPC_FAMILY_NUMBER(gpio_pad) \
+ (GPIO_REGS_SIZE * LPC_INTERNAL_PAD_NUM(gpio_pad))))
#define LPC_AD2_MMIO_OFFSET LPC_GPIO_OFFSET(45)
#define LPC_CLKRUN_MMIO_OFFSET LPC_GPIO_OFFSET(46)
#define LPC_AD0_MMIO_OFFSET LPC_GPIO_OFFSET(47)
#define LPC_FRAME_MMIO_OFFSET LPC_GPIO_OFFSET(48)
#define LPC_AD3_MMIO_OFFSET LPC_GPIO_OFFSET(50)
#define LPC_AD1_MMIO_OFFSET LPC_GPIO_OFFSET(52)
/* Value written into pad control reg 0 in early init */
#define PAD_CFG0_NATIVE(mode, term, inv_rx_tx) (PAD_GPIO_DISABLE \
| PAD_GPIOFG_HI_Z \
| PAD_MODE_SELECTION(mode) | PAD_PULL(term))
#define PAD_CFG0_NATIVE_PU20K(mode) PAD_CFG0_NATIVE(mode, 9, 0) /* PU 20K */
#define PAD_CFG0_NATIVE_PD20K(mode) PAD_CFG0_NATIVE(mode, 1, 0) /* PD 20K */
#define PAD_CFG0_NATIVE_M1 PAD_CFG0_NATIVE(1, 0, 0) /* no pull */
/*
* Configure value in LPC GPIO PADCFG0 registers. This function would be called
* to configure for low power/restore LPC GPIO lines
*/
static void lpc_gpio_config(u32 cycle)
{
if (cycle == SUSPEND_CYCLE) { /* Suspend cycle */
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_FRAME_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_AD0_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_AD1_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_AD2_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_AD3_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_CLKRUN_MMIO_OFFSET),
PAD_CFG0_NATIVE_PD20K(1));
} else { /* Resume cycle */
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_FRAME_MMIO_OFFSET),
PAD_CFG0_NATIVE_M1);
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_AD0_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_AD1_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_AD2_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_AD3_MMIO_OFFSET),
PAD_CFG0_NATIVE_PU20K(1));
write32((void *)(COMMUNITY_GPSOUTHEAST_BASE + LPC_CLKRUN_MMIO_OFFSET),
PAD_CFG0_NATIVE_M1);
}
}
/*
* Configure LPC GPIO lines for low power
*/
void lpc_set_low_power(void)
{
lpc_gpio_config(SUSPEND_CYCLE);
}
/*
* Configure GPIO lines early during romstage.
*/
void lpc_init(void)
{
uint16_t pm1_sts;
uint32_t pm1_cnt;
int slp_type = 0;
/*
* On S3 resume re-initialize GPIO lines which were
* configured for low power during S3 entry.
*/
pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS);
pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT);
if (pm1_sts & WAK_STS)
slp_type = acpi_sleep_from_pm1(pm1_cnt);
if ((slp_type == ACPI_S3) || (slp_type == ACPI_S5))
lpc_gpio_config(RESUME_CYCLE);
}
|
