1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/bootblock.h>
#include <device/pci_ops.h>
#include <soc/iosf.h>
#include <soc/iomap.h>
#include <soc/gpio.h>
#include <soc/lpc.h>
#include <soc/spi.h>
#include <soc/pmc.h>
static void setup_mmconfig(void)
{
uint32_t reg;
/* Set up the MMCONF range. The register lives in the BUNIT. The
* IO variant of the config access needs to be used initially to
* properly configure as the IOSF access registers live in PCI
* config space. */
reg = 0;
/* Clear the extended register. */
pci_io_write_config32(IOSF_PCI_DEV, MCRX_REG, reg);
reg = CONFIG_MMCONF_BASE_ADDRESS | 1;
pci_io_write_config32(IOSF_PCI_DEV, MDR_REG, reg);
reg = IOSF_OPCODE(IOSF_OP_WRITE_BUNIT) | IOSF_PORT(IOSF_PORT_BUNIT) |
IOSF_REG(BUNIT_MMCONF_REG) | IOSF_BYTE_EN;
pci_io_write_config32(IOSF_PCI_DEV, MCR_REG, reg);
}
static void program_base_addresses(void)
{
uint32_t reg;
const uint32_t lpc_dev = PCI_DEV(0, LPC_DEV, LPC_FUNC);
/* Memory Mapped IO registers. */
reg = PMC_BASE_ADDRESS | 2;
pci_write_config32(lpc_dev, PBASE, reg);
reg = IO_BASE_ADDRESS | 2;
pci_write_config32(lpc_dev, IOBASE, reg);
reg = ILB_BASE_ADDRESS | 2;
pci_write_config32(lpc_dev, IBASE, reg);
reg = SPI_BASE_ADDRESS | 2;
pci_write_config32(lpc_dev, SBASE, reg);
reg = MPHY_BASE_ADDRESS | 2;
pci_write_config32(lpc_dev, MPBASE, reg);
reg = PUNIT_BASE_ADDRESS | 2;
pci_write_config32(lpc_dev, PUBASE, reg);
reg = RCBA_BASE_ADDRESS | 1;
pci_write_config32(lpc_dev, RCBA, reg);
/* IO Port Registers. */
reg = ACPI_BASE_ADDRESS | 2;
pci_write_config32(lpc_dev, ABASE, reg);
reg = GPIO_BASE_ADDRESS | 2;
pci_write_config32(lpc_dev, GBASE, reg);
}
static void spi_init(void)
{
u32 *scs = (u32 *)(SPI_BASE_ADDRESS + SCS);
u32 *bcr = (u32 *)(SPI_BASE_ADDRESS + BCR);
uint32_t reg;
/* Disable generating SMI when setting WPD bit. */
write32(scs, read32(scs) & ~SMIWPEN);
/*
* Enable caching and prefetching in the SPI controller. Disable
* the SMM-only BIOS write and set WPD bit.
*/
reg = (read32(bcr) & ~SRC_MASK) | SRC_CACHE_PREFETCH | BCR_WPD;
reg &= ~EISS;
write32(bcr, reg);
}
static void tco_disable(void)
{
uint32_t reg;
reg = inl(ACPI_BASE_ADDRESS + TCO1_CNT);
reg |= TCO_TMR_HALT;
outl(reg, ACPI_BASE_ADDRESS + TCO1_CNT);
}
static void byt_config_com1_and_enable(void)
{
uint32_t reg;
/* Enable the UART hardware for COM1. */
reg = 1;
pci_write_config32(PCI_DEV(0, LPC_DEV, 0), UART_CONT, reg);
/* Set up the pads to select the UART function */
score_select_func(UART_RXD_PAD, 1);
score_select_func(UART_TXD_PAD, 1);
}
/* The distinction between nb/sb/cpu is not applicable here so
just pick the one that is called first. */
void bootblock_early_northbridge_init(void)
{
/* Allow memory-mapped PCI config access. */
setup_mmconfig();
program_base_addresses();
tco_disable();
if (CONFIG(ENABLE_BUILTIN_COM1))
byt_config_com1_and_enable();
spi_init();
}
|
