1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* This file is created based on Intel Alder Lake Processor PCH Datasheet
* Document number: 621483
* Chapter number: 2, 3, 4, 27, 28
*/
#include <device/mmio.h>
#include <device/device.h>
#include <device/pci_ops.h>
#include <intelblocks/fast_spi.h>
#include <intelblocks/gspi.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/p2sb.h>
#include <intelblocks/pcr.h>
#include <intelblocks/pmclib.h>
#include <intelblocks/rtc.h>
#include <soc/bootblock.h>
#include <soc/soc_chip.h>
#include <soc/espi.h>
#include <soc/iomap.h>
#include <soc/p2sb.h>
#include <soc/pci_devs.h>
#include <soc/pcr_ids.h>
#include <soc/pm.h>
#if CONFIG(SOC_INTEL_ALDERLAKE_PCH_N)
#define PCR_PSF3_TO_SHDW_PMC_REG_BASE 0x1080
#else
#define PCR_PSF3_TO_SHDW_PMC_REG_BASE 0x1100
#endif
#define PCR_PSFX_TO_SHDW_BAR0 0
#define PCR_PSFX_TO_SHDW_BAR1 0x4
#define PCR_PSFX_TO_SHDW_BAR2 0x8
#define PCR_PSFX_TO_SHDW_BAR3 0xC
#define PCR_PSFX_TO_SHDW_BAR4 0x10
#define PCR_PSFX_TO_SHDW_PCIEN_IOEN 0x01
#define PCR_PSFX_T0_SHDW_PCIEN 0x1C
static void soc_config_pwrmbase(void)
{
/*
* Assign Resources to PWRMBASE
* Clear BIT 1-2 Command Register
*/
pci_and_config16(PCH_DEV_PMC, PCI_COMMAND, ~(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
/* Program PWRM Base */
pci_write_config32(PCH_DEV_PMC, PWRMBASE, PCH_PWRM_BASE_ADDRESS);
/* Enable Bus Master and MMIO Space */
pci_or_config16(PCH_DEV_PMC, PCI_COMMAND, (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
/* Enable PWRM in PMC */
setbits32((void *) PCH_PWRM_BASE_ADDRESS + ACTL, PWRM_EN);
}
void bootblock_pch_early_init(void)
{
/*
* Perform P2SB configuration before any another controller initialization as the
* controller might want to perform PCR settings.
*/
p2sb_enable_bar();
p2sb_configure_hpet();
fast_spi_early_init(SPI_BASE_ADDRESS);
gspi_early_bar_init();
/*
* Enabling PWRM Base for accessing
* Global Reset Cause Register.
*/
soc_config_pwrmbase();
}
static void soc_config_acpibase(void)
{
uint32_t pmc_reg_value;
uint32_t pmc_base_reg = PCR_PSF3_TO_SHDW_PMC_REG_BASE;
pmc_reg_value = pcr_read32(PID_PSF3, pmc_base_reg + PCR_PSFX_TO_SHDW_BAR4);
if (pmc_reg_value != 0xffffffff) {
/* Disable Io Space before changing the address */
pcr_rmw32(PID_PSF3, pmc_base_reg + PCR_PSFX_T0_SHDW_PCIEN,
~PCR_PSFX_TO_SHDW_PCIEN_IOEN, 0);
/* Program ABASE in PSF3 PMC space BAR4*/
pcr_write32(PID_PSF3, pmc_base_reg + PCR_PSFX_TO_SHDW_BAR4,
ACPI_BASE_ADDRESS);
/* Enable IO Space */
pcr_rmw32(PID_PSF3, pmc_base_reg + PCR_PSFX_T0_SHDW_PCIEN,
~0, PCR_PSFX_TO_SHDW_PCIEN_IOEN);
}
}
void pch_early_iorange_init(void)
{
uint16_t io_enables = LPC_IOE_COMA_EN | LPC_IOE_COMB_EN |
LPC_IOE_LPT_EN | LPC_IOE_FDD_EN |
LPC_IOE_LGE_200 | LPC_IOE_HGE_208 |
LPC_IOE_KBC_60_64 | LPC_IOE_EC_62_66 |
LPC_IOE_SUPERIO_2E_2F | LPC_IOE_EC_4E_4F;
/* IO Decode Range */
if (CONFIG(DRIVERS_UART_8250IO))
lpc_io_setup_comm_a_b();
/* IO Decode Enable */
lpc_enable_fixed_io_ranges(io_enables);
/* Program generic IO Decode Range */
pch_enable_lpc();
}
void bootblock_pch_init(void)
{
/*
* Enabling ABASE for accessing PM1_STS, PM1_EN, PM1_CNT,
* GPE0_STS, GPE0_EN registers.
*/
soc_config_acpibase();
/* Set up GPE configuration */
pmc_gpe_init();
enable_rtc_upper_bank();
}
|
