1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2003 Eric Biederman
* Copyright (C) 2006-2010 coresystems GmbH
* Copyright (C) 2014 Imagination Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/mmio.h>
#include <boot/coreboot_tables.h>
#include <console/uart.h>
#include <device/device.h>
#include <delay.h>
#include <drivers/uart/uart8250reg.h>
/* Should support 8250, 16450, 16550, 16550A type UARTs */
/* Expected character delay at 1200bps is 9ms for a working UART
* and no flow-control. Assume UART as stuck if shift register
* or FIFO takes more than 50ms per character to appear empty.
*/
#define SINGLE_CHAR_TIMEOUT (50 * 1000)
#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT)
#define UART_SHIFT 2
#define GEN_ACCESSOR(name, idx) \
static inline uint8_t read_##name(unsigned int base_port) \
{ \
return read8((void *)(base_port + (idx << UART_SHIFT))); \
} \
\
static inline void write_##name(unsigned int base_port, uint8_t val) \
{ \
write8((void *)(base_port + (idx << UART_SHIFT)), val); \
}
GEN_ACCESSOR(rbr, UART8250_RBR)
GEN_ACCESSOR(tbr, UART8250_TBR)
GEN_ACCESSOR(ier, UART8250_IER)
GEN_ACCESSOR(fcr, UART8250_FCR)
GEN_ACCESSOR(lcr, UART8250_LCR)
GEN_ACCESSOR(mcr, UART8250_MCR)
GEN_ACCESSOR(lsr, UART8250_LSR)
GEN_ACCESSOR(dll, UART8250_DLL)
GEN_ACCESSOR(dlm, UART8250_DLM)
static int uart8250_mem_can_tx_byte(unsigned int base_port)
{
return read_lsr(base_port) & UART8250_LSR_THRE;
}
static void uart8250_mem_tx_byte(unsigned int base_port, unsigned char data)
{
unsigned long int i = SINGLE_CHAR_TIMEOUT;
while (i-- && !uart8250_mem_can_tx_byte(base_port))
udelay(1);
write_tbr(base_port, data);
}
static void uart8250_mem_tx_flush(unsigned int base_port)
{
unsigned long int i = FIFO_TIMEOUT;
while (i-- && !(read_lsr(base_port) & UART8250_LSR_TEMT))
udelay(1);
}
static int uart8250_mem_can_rx_byte(unsigned int base_port)
{
return read_lsr(base_port) & UART8250_LSR_DR;
}
static unsigned char uart8250_mem_rx_byte(unsigned int base_port)
{
unsigned long int i = SINGLE_CHAR_TIMEOUT;
while (i-- && !uart8250_mem_can_rx_byte(base_port))
udelay(1);
if (i)
return read_rbr(base_port);
else
return 0x0;
}
static void uart8250_mem_init(unsigned int base_port, unsigned int divisor)
{
/* Disable interrupts */
write_ier(base_port, 0x0);
/* Enable FIFOs */
write_fcr(base_port, UART8250_FCR_FIFO_EN);
/* Assert DTR and RTS so the other end is happy */
write_mcr(base_port, UART8250_MCR_DTR | UART8250_MCR_RTS);
/* DLAB on */
write_lcr(base_port, UART8250_LCR_DLAB | CONFIG_TTYS0_LCS);
write_dll(base_port, divisor & 0xFF);
write_dlm(base_port, (divisor >> 8) & 0xFF);
/* Set to 3 for 8N1 */
write_lcr(base_port, CONFIG_TTYS0_LCS);
}
unsigned int uart_platform_refclk(void)
{
/* 1.8433179 MHz */
return 1843318;
}
void uart_init(int idx)
{
u32 base = CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
if (!base)
return;
unsigned int div;
div = uart_baudrate_divisor(get_uart_baudrate(),
uart_platform_refclk(), 16);
uart8250_mem_init(base, div);
}
void uart_tx_byte(int idx, unsigned char data)
{
uart8250_mem_tx_byte(CONFIG_CONSOLE_SERIAL_UART_ADDRESS, data);
}
unsigned char uart_rx_byte(int idx)
{
return uart8250_mem_rx_byte(CONFIG_CONSOLE_SERIAL_UART_ADDRESS);
}
void uart_tx_flush(int idx)
{
uart8250_mem_tx_flush(CONFIG_CONSOLE_SERIAL_UART_ADDRESS);
}
void uart_fill_lb(void *data)
{
struct lb_serial serial;
serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED;
serial.baseaddr = CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
serial.baud = get_uart_baudrate();
serial.regwidth = 1 << UART_SHIFT;
serial.input_hertz = uart_platform_refclk();
serial.uart_pci_addr = CONFIG_UART_PCI_ADDR;
lb_add_serial(&serial, data);
lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data);
}
|
