1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/*
* This file is part of the coreboot project.
*
* Copyright 2017-present Facebook, Inc.
* Copyright 2003-2017 Cavium Inc. <support@cavium.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This file consists of data imported from bdk-config.c
*/
// coreboot
#include <string.h>
#include <assert.h>
#include <device/i2c.h>
#include <device/i2c_simple.h>
#include <endian.h>
#include <arch/io.h>
#include <delay.h>
#include <reset.h>
#include <soc/timer.h>
// BDK
#include <libbdk-arch/bdk-numa.h>
#include <libbdk-hal/bdk-config.h>
#include <libbdk-hal/bdk-twsi.h>
#include <libbdk-boot/bdk-watchdog.h>
/**
* Do a twsi read from a 7 bit device address using an (optional)
* internal address. Up to 4 bytes can be read at a time.
*
* @param twsi_id which TWSI bus to use
* @param dev_addr Device address (7 bit)
* @param internal_addr
* Internal address. Can be 0, 1 or 2 bytes in width
* @param num_bytes Number of data bytes to read (1-4)
* @param ia_width_bytes
* Internal address size in bytes (0, 1, or 2)
*
* @return Read data, or -1 on failure
*/
int64_t bdk_twsix_read_ia(bdk_node_t node, int twsi_id, uint8_t dev_addr,
uint16_t internal_addr, int num_bytes,
int ia_width_bytes)
{
struct i2c_msg seg[2];
u32 buf;
assert (num_bytes < 5);
assert (ia_width_bytes < 3);
seg[0].flags = 0;
seg[0].slave = dev_addr;
seg[0].buf = (u8 *)&internal_addr;
seg[0].len = ia_width_bytes;
seg[1].flags = I2C_M_RD;
seg[1].slave = dev_addr;
seg[1].buf = (u8 *)&buf;
seg[1].len = num_bytes;
if (i2c_transfer(twsi_id, seg, ARRAY_SIZE(seg)) < 0)
return -1;
return cpu_to_be32(buf);
}
/**
* Write 1-8 bytes to a TWSI device using an internal address.
*
* @param twsi_id which TWSI interface to use
* @param dev_addr TWSI device address (7 bit only)
* @param internal_addr
* TWSI internal address (0, 8, or 16 bits)
* @param num_bytes Number of bytes to write (1-8)
* @param ia_width_bytes
* internal address width, in bytes (0, 1, 2)
* @param data Data to write. Data is written MSB first on the twsi bus, and
* only the lower num_bytes bytes of the argument are valid. (If
* a 2 byte write is done, only the low 2 bytes of the argument is
* used.
*
* @return Zero on success, -1 on error
*/
int bdk_twsix_write_ia(bdk_node_t node, int twsi_id, uint8_t dev_addr,
uint16_t internal_addr, int num_bytes,
int ia_width_bytes, uint64_t data)
{
struct i2c_msg seg;
u8 buf[10];
assert (num_bytes <= 8);
assert (ia_width_bytes < 3);
memcpy(buf, &internal_addr, ia_width_bytes);
memcpy(&buf[ia_width_bytes], &data, num_bytes);
seg.flags = 0;
seg.slave = dev_addr;
seg.buf = buf;
seg.len = num_bytes + ia_width_bytes;
return platform_i2c_transfer(twsi_id, &seg, 1);
}
void bdk_watchdog_set(unsigned int timeout_ms)
{
watchdog_set(0, timeout_ms);
}
void bdk_watchdog_poke(void)
{
watchdog_poke(0);
}
void bdk_watchdog_disable(void)
{
watchdog_disable(0);
}
int bdk_watchdog_is_running(void)
{
return watchdog_is_running(0);
}
|
