1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012-2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <arch/io.h>
#include <arch/pirq_routing.h>
#include <console/console.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <pc80/i8259.h>
#include <pc80/mc146818rtc.h>
#include <drivers/generic/ioapic/chip.h>
#include "vx900.h"
#include "chip.h"
/**
* @file lpc.c
*
* STATUS:
* We do a fair bit of setup, and most of it seems to work fairly well. There
* are still a few FIXME items here and there, but overall, this code hasn't
* been touched much from its initial 2012 version to 2013, when it was revived.
*
* We do the IOAPIC setup with the assumption that it is declared in the
* mainboard's devicetree.cb. We cannot use the IOAPIC however. The interrupts
* do not make it to the CPU. This issue is still under investigation.
*
* We also route PIRQs with CONFIG_PIRQ_ROUTE. This is currently the only way to
* get interrupts working.
*
* On the VX900, the keyboard can be connected directly to the chipset
* (referenced as "internal keyboard" in the documents). As long as that is the
* case (not connected to the superIO), and we disable the superIO keyboard LDN,
* it will work, but perhaps this should be more configurable.
*/
static void vx900_lpc_misc_stuff(device_t dev)
{
char extint;
u8 val;
struct northbridge_via_vx900_config *nb = (void *)dev->chip_info;
/* GPIO 11,10 to SATALED [1,0] */
pci_mod_config8(dev, 0xe4, 0, 1 << 0);
/* Route the external interrupt line */
extint = nb->ext_int_route_to_pirq;
if (extint < 'A' || extint > 'H') {
printk(BIOS_WARNING, "Invalid PIRQ%c for external interrupt\n",
extint);
} else {
printk(BIOS_INFO, "Routing external interrupt to PIRQ%c\n",
extint);
val = extint - 'A';
val |= (1 << 3); /* bit3 enables the external int */
pci_mod_config8(dev, 0x55, 0xf, val);
}
}
static void vx900_lpc_dma_setup(device_t dev)
{
/* These are the steps recommended by VIA in order to get DMA running */
/* Enable Positive South Module PCI Cycle Decoding */
/* FIXME: Setting this seems to hang our system */
//pci_mod_config8(dev, 0x58, 0, 1<<4);
/* Positive decoding for ROM + APIC + On-board IO ports */
pci_mod_config8(dev, 0x6c, 0, (1 << 2) | (1 << 3) | (1 << 7));
/* Enable DMA channels. BIOS guide recommends DMA channel 2 off */
pci_write_config8(dev, 0x53, 0xfb);
/* Disable PCI/DMA Memory Cycles Output to PCI Bus */
pci_mod_config8(dev, 0x5b, (1 << 5), 0);
/* DMA bandwidth control - Improved bandwidth */
pci_write_config8(dev, 0x53, 0xff);
/* ISA Positive Decoding control */
pci_write_config8(dev, 0x6d, 0xdf);
pci_write_config8(dev, 0x6e, 0x98);
pci_write_config8(dev, 0x6f, 0x30);
}
/**
*\brief VX900: Set up the south module IOAPIC (for the ISA/LPC bus)
*
* Enable the IOAPIC in the south module, and properly set it up.
* \n
* This is the hardware specific initialization for the IOAPIC, and complements
* the setup done by the generic IOAPIC driver. In order for the IOAPIC to work
* properly, it _must_ be declared in devicetree.cb .
* \n
* We are assuming this is called before the drivers/generic/ioapic code,
* which should be the case if devicetree.cb is set up properly.
*/
static void vx900_lpc_ioapic_setup(device_t dev)
{
/* Find the IOAPIC, and make sure it's set up correctly in devicetree.cb
* If it's not, then the generic ioapic driver will not set it up
* correctly, and the MP table will not be correctly generated */
device_t ioapic;
for (ioapic = dev->next; ioapic; ioapic = ioapic->next) {
if (ioapic->path.type == DEVICE_PATH_IOAPIC)
break;
}
/* You did put an IOAPIC in devicetree.cb, didn't you? */
if (ioapic == 0) {
/* We don't have enough info to set up the IOAPIC */
printk(BIOS_ERR, "ERROR: South module IOAPIC not found. "
"Check your devicetree.cb\n");
return;
}
/* Found an IOAPIC, now we need to make sure it's the right one */
ioapic_config_t *config = (ioapic_config_t *) ioapic->chip_info;
if (!config->have_isa_interrupts) {
/* Umh, is this the right IOAPIC ? */
printk(BIOS_ERR, "ERROR: South module IOAPIC not carrying ISA "
"interrupts. Check your devicetree.cb\n");
printk(BIOS_ERR, "Will not initialize this IOAPIC.\n");
return;
}
/* The base address of this IOAPIC _must_ be at 0xfec00000.
* Don't move this value to a #define, as people might think it's
* configurable. It is not. */
const u32 base = config->base;
if (base != 0xfec00000) {
printk(BIOS_ERR, "ERROR: South module IOAPIC base should be at "
"0xfec00000\n but we found it at 0x%.8x\n", base);
return;
}
print_debug("VX900 LPC: Setting up the south module IOAPIC.\n");
/* Enable IOAPIC
* So much work for one line of code. Talk about bloat :)
* The 8259 PIC should still work even if the IOAPIC is enabled, so
* there's no crime in enabling the IOAPIC here. */
pci_mod_config8(dev, 0x58, 0, 1 << 6);
}
static void vx900_lpc_interrupt_stuff(device_t dev)
{
/* Enable setting trigger mode through 0x4d0, and 0x4d1 ports
* And enable I/O recovery time */
pci_mod_config8(dev, 0x40, 0, (1 << 2) | (1 << 6));
/* Set serial IRQ frame width to 6 PCI cycles (recommended by VIA)
* And enable serial IRQ */
pci_mod_config8(dev, 0x52, 3 << 0, (1 << 3) | (1 << 0));
/* Disable IRQ12 storm FIXME: bad comment */
pci_mod_config8(dev, 0x51, (1 << 2), 0);
pci_write_config8(dev, 0x4c, (1 << 6));
/* FIXME: Do we really need this? SeaBIOS/linux runs fine without it.
* Is this something the payload/OS should do, or is it safe for us to
* do it? */
/* Get the IRQs up and running */
setup_i8259();
vx900_lpc_dma_setup(dev);
/* The IOAPIC is special, and we treat it separately */
vx900_lpc_ioapic_setup(dev);
}
static void vx900_lpc_init(device_t dev)
{
vx900_lpc_interrupt_stuff(dev);
vx900_lpc_misc_stuff(dev);
dump_pci_device(dev);
}
static struct device_operations vx900_lpc_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = vx900_lpc_init,
.scan_bus = scan_static_bus,
};
static const struct pci_driver lpc_driver __pci_driver = {
.ops = &vx900_lpc_ops,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_VX900_LPC,
};
#if CONFIG_PIRQ_ROUTE
void pirq_assign_irqs(const u8 * pirq)
{
device_t lpc;
lpc = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VX900_LPC, 0);
/* Take care of INTA -> INTD */
pci_mod_config8(lpc, 0x55, (0xf << 4), pirq[0] << 4);
pci_write_config8(lpc, 0x56, pirq[1] | (pirq[2] << 4));
pci_write_config8(lpc, 0x57, pirq[3] << 4);
/* Enable INTE -> INTH to be on separate IRQs */
pci_mod_config8(lpc, 0x46, 0, 1 << 4);
/* Now do INTE -> INTH */
pci_write_config8(lpc, 0x44, pirq[4] | (pirq[5] << 4));
pci_write_config8(lpc, 0x45, pirq[6] | (pirq[7] << 4));
}
#endif
|
