1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2009 One Laptop per Child, Association, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/io.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <pc80/mc146818rtc.h>
#include <pc80/keyboard.h>
#include <pc80/i8259.h>
#include "vx800.h"
static const unsigned char pciIrqs[4] = { 0xa, 0x9, 0xb, 0xa };
static const unsigned char vgaPins[4] = { 'A', 'B', 'C', 'D' }; //only INTA
static const unsigned char slotPins[4] = { 'A', 'A', 'A', 'A' }; //all 4
static const unsigned char usbdevicePins[4] = { 'A', 'B', 'C', 'D' }; //only INTA
static const unsigned char sdioPins[4] = { 'A', 'B', 'C', 'D' }; //only INTA
static const unsigned char sd_ms_ctrl_Pins[4] = { 'B', 'C', 'D', 'A' }; //only INTA
static const unsigned char ce_ata_nf_ctrl_Pins[4] = { 'C', 'C', 'D', 'A' }; //only INTA
static const unsigned char hdacaudioPins[4] = { 'B', 'C', 'D', 'A' }; //only INTA
static unsigned char *pin_to_irq(const unsigned char *pin)
{
static unsigned char Irqs[4];
int i;
for (i = 0; i < 4; i++)
Irqs[i] = pciIrqs[pin[i] - 'A'];
return Irqs;
}
static void pci_routing_fixup(struct device *dev)
{
printk(BIOS_INFO, "%s: dev is %p\n", __FUNCTION__, dev);
/* set up PCI IRQ routing */
pci_write_config8(dev, 0x55, pciIrqs[0] << 4);
pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4));
pci_write_config8(dev, 0x57, pciIrqs[3] << 4);
/* VGA */
printk(BIOS_INFO, "setting vga\n");
pci_assign_irqs(0, 0x1, pin_to_irq(vgaPins));
/* PCI slot */
printk(BIOS_INFO, "setting pci slot\n");
pci_assign_irqs(0, 0x08, pin_to_irq(slotPins));
/* PCI slot */
printk(BIOS_INFO, "setting USB Device Controller\n");
pci_assign_irqs(0, 0x0b, pin_to_irq(usbdevicePins));
/* PCI slot */
printk(BIOS_INFO, "setting SDIO Controller\n");
pci_assign_irqs(0, 0x0c, pin_to_irq(sdioPins));
/* PCI slot */
printk(BIOS_INFO, "setting SD $ MS Controller\n");
pci_assign_irqs(0, 0x0d, pin_to_irq(sd_ms_ctrl_Pins));
/* PCI slot */
printk(BIOS_INFO, "setting CE-ATA NF Controller(Card Boot)\n");
pci_assign_irqs(0, 0x0e, pin_to_irq(ce_ata_nf_ctrl_Pins));
/* PCI slot */
printk(BIOS_INFO, "setting ide\n");
//pci_assign_irqs(0, 0x0f, pin_to_irq(idePins));
/* Standard usb components */
printk(BIOS_INFO, "setting usb1-2\n");
// pci_assign_irqs(0, 0x10, pin_to_irq(usbPins));
/* sound hardware */
printk(BIOS_INFO, "setting hdac audio\n");
pci_assign_irqs(0, 0x14, pin_to_irq(hdacaudioPins));
printk(BIOS_SPEW, "%s: DONE\n", __FUNCTION__);
}
static void setup_pm(device_t dev)
{
u16 tmp;
/* Debounce LID and PWRBTN# Inputs for 16ms. */
pci_write_config8(dev, 0x80, 0x20);
/* Set ACPI base address to IO VX800_ACPI_IO_BASE */
pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 1);
/* set ACPI irq to 9 */
pci_write_config8(dev, 0x82, 0x49);
/* Primary interupt channel, define wake events 0=IRQ0 15=IRQ15 1=en. */
// pci_write_config16(dev, 0x84, 0x30f2);
pci_write_config16(dev, 0x84, 0x609a); // 0x609a??
/* SMI output level to low, 7.5us throttle clock */
pci_write_config8(dev, 0x8d, 0x18);
/* GP Timer Control 1s */
pci_write_config8(dev, 0x93, 0x88);
/* Power Well */
pci_write_config8(dev, 0x94, 0x20); // 0x20??
/* 7 = stp to sust delay 1msec
* 6 = SUSST# Deasserted Before PWRGD for STD
*/
pci_write_config8(dev, 0x95, 0xc0); // 0xc1??
/* Disable GP2 & GP3 Timer */
pci_write_config8(dev, 0x98, 0);
/* GP2 Timer Counter */
pci_write_config8(dev, 0x99, 0xfb);
/* GP3 Timer Counter */
//pci_write_config8(dev, 0x9a, 0x20);
/* Multi Function Select 1 */
pci_write_config8(dev, 0xe4, 0x00);
/* Multi Function Select 2 */
pci_write_config8(dev, 0xe5, 0x41); //??
/* Enable ACPI access (and setup like award) */
pci_write_config8(dev, 0x81, 0x84);
/* Clear status events. */
outw(0xffff, VX800_ACPI_IO_BASE + 0x00);
outw(0xffff, VX800_ACPI_IO_BASE + 0x20);
outw(0xffff, VX800_ACPI_IO_BASE + 0x28);
outl(0xffffffff, VX800_ACPI_IO_BASE + 0x30);
/* Disable SCI on GPIO. */
outw(0x0, VX800_ACPI_IO_BASE + 0x22);
/* Disable SMI on GPIO. */
outw(0x0, VX800_ACPI_IO_BASE + 0x24);
/* Disable all global enable SMIs. */
outw(0x0, VX800_ACPI_IO_BASE + 0x2a);
/* All SMI off, both IDE buses ON, PSON rising edge. */
outw(0x0, VX800_ACPI_IO_BASE + 0x2c);
/* Primary activity SMI disable. */
outl(0x0, VX800_ACPI_IO_BASE + 0x34);
/* GP timer reload on none. */
outl(0x0, VX800_ACPI_IO_BASE + 0x38);
/* Disable extended IO traps. */
outb(0x0, VX800_ACPI_IO_BASE + 0x42);
tmp = inw(VX800_ACPI_IO_BASE + 0x04);
/* SCI is generated for RTC/pwrBtn/slpBtn. */
tmp |= 1;
outw(tmp, VX800_ACPI_IO_BASE + 0x04);
/* Allow SLP# signal to assert LDTSTOP_L.
* Will work for C3 and for FID/VID change.
*/
outb(0x1, VX800_ACPI_IO_BASE + 0x11);
/*
outw(0x0, 0x424);
outw(0x0, 0x42a);
outw(0x1, 0x42c);
outl(0x0, 0x434);
outl(0x01, 0x438);
outb(0x0, 0x442);
outl(0xffff7fff, 0x448);
outw(0x001, 0x404);
*/
}
static void S3_ps2_kb_ms_wakeup(struct device *dev)
{
u8 enables;
enables = pci_read_config8(dev, 0x51);
enables |= 2;
pci_write_config8(dev, 0x51, enables);
outb(0xe0, 0x2e);
outb(0x0b, 0x2f); //if 09,then only support kb wakeup
outb(0xe1, 0x2e); //set any key scan code can wakeup
outb(0x00, 0x2f);
outb(0xe9, 0x2e); //set any mouse scan code can wakeup
outb(0x00, 0x2f);
enables &= 0xd;
pci_write_config8(dev, 0x51, enables);
outb(inb(VX800_ACPI_IO_BASE + 0x02) | 0x20, VX800_ACPI_IO_BASE + 0x02); //ACPI golabe enable for sci smi trigger
outw(inw(VX800_ACPI_IO_BASE + 0x22) | 0x204, VX800_ACPI_IO_BASE + 0x22); //ACPI SCI on Internal KBC PME and mouse PME
}
static void S3_usb_wakeup(struct device *dev)
{
outw(inw(VX800_ACPI_IO_BASE + 0x22) | 0x4000, VX800_ACPI_IO_BASE + 0x22); //SCI on USB PME
}
static void S3_lid_wakeup(struct device *dev)
{
outw(inw(VX800_ACPI_IO_BASE + 0x22) | 0x800, VX800_ACPI_IO_BASE + 0x22); //SCI on LID PME
}
/* This looks good enough to work, maybe */
static void vx800_sb_init(struct device *dev)
{
unsigned char enables;
// enable the internal I/O decode
enables = pci_read_config8(dev, 0x6C);
enables |= 0x80;
pci_write_config8(dev, 0x6C, enables);
// Map 4MB of FLASH into the address space
// pci_write_config8(dev, 0x41, 0x7f);
// Set bit 6 of 0x40, because Award does it (IO recovery time)
// IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
// interrupts can be properly marked as level triggered.
enables = pci_read_config8(dev, 0x40);
enables |= 0x44;
pci_write_config8(dev, 0x40, enables);
/* DMA Line buffer control */
enables = pci_read_config8(dev, 0x42);
enables |= 0xf0;
pci_write_config8(dev, 0x42, enables);
/* I/O recovery time */
pci_write_config8(dev, 0x4c, 0x44);
/* ROM memory cycles go to LPC. */
pci_write_config8(dev, 0x59, 0x80);
/* Set 0x5b to 0x01 to match Award */
//pci_write_config8(dev, 0x5b, 0x01);
enables = pci_read_config8(dev, 0x5b);
enables |= 0x01;
pci_write_config8(dev, 0x5b, enables);
/* Set Read Pass Write Control Enable */
pci_write_config8(dev, 0x48, 0x0c);
/* Set 0x58 to 0x42 APIC and RTC. */
//pci_write_config8(dev, 0x58, 0x42); this cmd cause the irq0 can not be triggerd,since bit 5 was set to 0.
enables = pci_read_config8(dev, 0x58);
enables |= 0x41; //
pci_write_config8(dev, 0x58, enables);
/* Set bit 3 of 0x4f to match award (use INIT# as cpu reset) */
enables = pci_read_config8(dev, 0x4f);
enables |= 0x08;
pci_write_config8(dev, 0x4f, enables);
/* enable serial irq */
pci_write_config8(dev, 0x52, 0x9);
/* dma */
pci_write_config8(dev, 0x53, 0x00);
// Power management setup
setup_pm(dev);
/* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
pci_write_config8(dev, 0x40, 0x54);
// Start the rtc
cmos_init(0);
}
/* total kludge to get lxb to call our childrens set/enable functions - these are
not called unless this device has a resource to set - so set a dummy one */
static void vx800_read_resources(device_t dev)
{
struct resource *resource;
pci_dev_read_resources(dev);
resource = new_resource(dev, 1);
resource->flags |=
IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO |
IORESOURCE_STORED;
resource->size = 2;
resource->base = 0x2e;
}
static void vx800_set_resources(device_t dev)
{
struct resource *resource;
resource = find_resource(dev, 1);
resource->flags |= IORESOURCE_STORED;
pci_dev_set_resources(dev);
}
static void southbridge_init(struct device *dev)
{
printk(BIOS_DEBUG, "vx800 sb init\n");
vx800_sb_init(dev);
pci_routing_fixup(dev);
setup_i8259(); // make sure interupt controller is configured before keyboard init
/* turn on keyboard and RTC, no need to visit this reg twice */
pc_keyboard_init();
printk(BIOS_DEBUG, "ps2 usb lid, you set who can wakeup system from s3 sleep\n");
S3_ps2_kb_ms_wakeup(dev);
S3_usb_wakeup(dev);
S3_lid_wakeup(dev);
/* enable acpi cpu c3 state. (c2 state need not do anything.)
#1
fadt->pm2_cnt_blk = 0x22;//to support cpu-c3
fadt->p_lvl2_lat = 0x50; //this is the coreboot source
fadt->p_lvl3_lat = 0x320;//
fadt->pm2_cnt_len = 1;//to support cpu-c3
#2
ssdt? ->every cpu has a P_BLK address. set it to 0x10 (so that "Read Processor Level3 register(PMIORx15<7:0>) to enter C3 state"---VIA vx800 P SPEC )
#3 write 0x17 in to PMIO=VX800_ACPI_IO_BASE + 0x26, following the describtion in the P-spec.
1 enable SLP# asserts in C3 state PMIORx26<1> =1
2 enable CPUSTP# asserts in C3 state; PMIORx26<2> =1
3 CLKRUN# is always asserted PMIORx26<3> =0
4 Disable PCISTP# When CLKRUN# is asserted
1: PCISTP# will not assert When CLKRUN# is asserted
PMIORx26<4> =1
5 This bit controls whether the CPU voltage is lowered when in C3/S1 state.
VRDSLP will be active in either this bit set in C3 or LVL4 register read
PMIORx26<0> =0
6 Read Processor Level3 register(PMIORx15<7:0>) to enter C3 state PMIORx15
*/
outb(0x17, VX800_ACPI_IO_BASE + 0x26);
}
static struct device_operations vx800_lpc_ops = {
.read_resources = vx800_read_resources,
.set_resources = vx800_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = southbridge_init,
.scan_bus = scan_static_bus,
};
static const struct pci_driver lpc_driver __pci_driver = {
.ops = &vx800_lpc_ops,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_VX855_LPC,
};
|
