1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2009 One Laptop per Child, Association, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
CB_STATUS DDR2_DRAM_INIT(void)
{
u8 i;
u32 RamSize;
DRAM_SYS_ATTR DramAttr;
PRINT_DEBUG_MEM("DRAM_INIT \r");
memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR));
/*Step1 DRAM Detection; DDR1 or DDR2; Get SPD Data; Rank Presence;64 or 128bit; Unbuffered or registered; 1T or 2T */
DRAMDetect(&DramAttr);
//Step2 set Frequency; calculate CL and Frequncy from SPD data; set the Frequency
DRAMFreqSetting(&DramAttr);
//Step3 Set DRAM Timing; CL, tRP, tRCD, tRAS, tRFC, tRRD, tWR, tWTR, tRTP
DRAMTimingSetting(&DramAttr);
//Step4 DRDY
DRAMDRDYSetting(&DramAttr);
//Step5 Burst length
DRAMBurstLength(&DramAttr);
//Step6 DRAM Driving Adjustment
DRAMDriving(&DramAttr);
//Step7 duty cycle control
DutyCycleCtrl(&DramAttr);
//Step8 DRAM clock phase and delay control
DRAMClkCtrl(&DramAttr);
//Step9 set register before init DRAM device
DRAMRegInitValue(&DramAttr);
//Step10 DDR and DDR2 initialize process
DRAMInitializeProc(&DramAttr);
//Step13 Interleave function in rankmap.c
DRAMBankInterleave(&DramAttr);
//Step14 Sizing
DRAMSizingMATypeM(&DramAttr);
//Step11 Search DQS and DQ output delay
DRAMDQSOutputSearch(&DramAttr);
//Step12 Search DQS input delay
DRAMDQSInputSearch(&DramAttr);
//Step15 DDR fresh counter setting
DRAMRefreshCounter(&DramAttr);
//Step16 Final register setting for improve performance
DRAMRegFinalValue(&DramAttr);
RamSize = 0;
for (i = 0; i < MAX_RANKS; i++) {
if (DramAttr.RankSize[i] == 0) {
continue;
}
RamSize += DramAttr.RankSize[i];
}
PRINT_DEBUG_MEM("RamSize=");
PRINT_DEBUG_MEM_HEX32(RamSize);
PRINT_DEBUG_MEM("\r");
DumpRegisters(0, 3);
//BOOLEAN bTest = DramBaseTest( M1, RamSize - M1 * 2,SPARE, FALSE);
/* the memory can not correct work, this is because the user set the incorrect memory
parameter from setup interface.so we must set the boot mode to recovery mode, let
the system to reset and use the spd value to initialize the memory */
SetUMARam();
return CB_SUCCESS;
}
|
