1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
/* IDE specific bits */
#define IDE_MODE_REG 0x09
#define IDE0_NATIVE_MODE (1 << 0)
#define IDE1_NATIVE_MODE (1 << 2)
/* These are default addresses */
#define IDE0_DATA_ADDR 0x1f0
#define IDE0_CONTROL_ADDR 0x3f4
#define IDE1_DATA_ADDR 0x170
#define IDE1_CONTROL_ADDR 0x370
#define BUS_MASTER_ADDR 0xfc00
#define CHANNEL_ENABLE_REG 0x40
#define ENABLE_IDE0 (1 << 0)
#define ENABLE_IDE1 (1 << 1)
/* TODO: better user configuration */
#define DISABLE_SATA 0
static void sata_init(struct device *dev)
{
u8 reg8;
printk(BIOS_DEBUG, "Configuring VIA SATA & EIDE Controller\n");
/* Class IDE Disk, instead of RAID controller */
reg8 = pci_read_config8(dev, 0x45);
reg8 &= 0x7f; /* Sub Class Write Protect off */
pci_write_config8(dev, 0x45, reg8);
pci_write_config8(dev, 0x0a, 0x01);
reg8 |= 0x80; /* Sub Class Write Protect on */
pci_write_config8(dev, 0x45, reg8);
#if defined(DISABLE_SATA) && (DISABLE_SATA == 1)
printk(BIOS_INFO, "Disabling SATA (Primary Channel)\n");
/* Disable SATA channels */
pci_write_config8(dev, 0x40, 0x00);
#else
pci_write_config8(dev, 0x40, 0x43);
#endif
reg8 = pci_read_config8(dev, 0x6a);
reg8 |= 0x8; /* Mode Select set to Manual Mode */
reg8 &= ~7;
reg8 |= 0x2; /* Manual setting to 50 ohm */
pci_write_config8(dev, 0x6a, reg8);
reg8 = pci_read_config8(dev, 0x6b);
reg8 &= ~7;
reg8 |= 0x01; /* Autocomp of Termination */
pci_write_config8(dev, 0x6b, reg8);
/* Enable EIDE (secondary channel) even if SATA disabled */
reg8 = pci_read_config8(dev, 0xc0);
reg8 |= 0x1;
pci_write_config8(dev, 0xc0, reg8);
// Enable bus mastering, memory space acces, io space access
pci_write_config16(dev, 0x04, 0x0007);
/* Set SATA base ports. */
pci_write_config32(dev, 0x10, 0x01f1);
pci_write_config32(dev, 0x14, 0x03f5);
/* Set EIDE base ports. */
pci_write_config32(dev, 0x18, 0x0171);
pci_write_config32(dev, 0x1c, 0x0375);
/* SATA/EIDE Bus Master mode base address */
pci_write_config32(dev, 0x20, BUS_MASTER_ADDR | 1);
/* Enable read/write prefetch buffers */
reg8 = pci_read_config8(dev, 0xc1);
reg8 |= 0x30;
pci_write_config8(dev, 0xc1, reg8);
/* Set FIFO thresholds like */
pci_write_config8(dev, 0xc3, 0x1); /* FIFO flushed when 1/2 full */
/* EIDE Sector Size */
pci_write_config16(dev, 0xe8, 0x200);
/* Some Miscellaneous Control */
pci_write_config8(dev, 0x44, 0x7);
pci_write_config8(dev, 0x45, 0xaf);
pci_write_config8(dev, 0x46, 0x8);
/* EIDE Configuration */
reg8 = pci_read_config8(dev, 0xc4);
reg8 |= 0x10;
pci_write_config8(dev, 0xc4, reg8);
pci_write_config8(dev, 0xc5, 0xc);
/* Interrupt Line */
reg8 = pci_read_config8(dev, 0x45);
reg8 &= ~(1 << 4); /* Interrupt Line Write Protect off */
pci_write_config8(dev, 0x45, reg8);
pci_write_config8(dev, 0x3c, 0x0e); /* Interrupt */
/* Set the drive timing control */
pci_write_config16(dev, 0x48, 0x5d5d);
/* Enable only compatibility mode. */
reg8 = pci_read_config8(dev, 0x42);
reg8 &= ~0xa0;
pci_write_config8(dev, 0x42, reg8);
reg8 = pci_read_config8(dev, 0x42);
printk(BIOS_DEBUG, "Reg 0x42 read back as 0x%x\n", reg8);
/* Support Staggered Spin-Up */
reg8 = pci_read_config8(dev, 0xb9);
if ((reg8 & 0x8) == 0) {
printk(BIOS_DEBUG, "start OOB sequence on both drives\n");
reg8 |= 0x30;
pci_write_config8(dev, 0xb9, reg8);
}
}
static struct device_operations sata_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = sata_init,
.enable = 0,
.ops_pci = 0,
};
/* When the SATA controller is in IDE mode, the Device ID is 0x5324 */
static const struct pci_driver northbridge_driver __pci_driver = {
.ops = &sata_ops,
.vendor = PCI_VENDOR_ID_VIA,
.device = 0x5324,
};
|
