1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <console/console.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <northbridge/intel/pineview/pineview.h>
#include <northbridge/intel/pineview/chip.h>
#include <option.h>
#include <types.h>
#define LPC_DEV PCI_DEV(0, 0x1f, 0)
#define CRCLK_PINEVIEW 0x02
#define CDCLK_PINEVIEW 0x10
static void early_graphics_setup(void)
{
u8 reg8;
u16 reg16;
u32 reg32;
const struct device *d0f0 = pcidev_on_root(0, 0);
const struct northbridge_intel_pineview_config *config = d0f0->chip_info;
pci_write_config8(HOST_BRIDGE, DEVEN, BOARD_DEVEN);
/* Fetch VRAM size from CMOS option */
reg8 = get_uint_option("gfx_uma_size", 0); /* 0 for 8MB */
/* Ensure the setting is valid */
if (reg8 > 6)
reg8 = 0;
/* Select 1M GTT */
pci_write_config16(HOST_BRIDGE, GGC, (1 << 8) | ((reg8 + 3) << 4));
printk(BIOS_SPEW, "Set GFX clocks...");
reg16 = mchbar_read16(MCH_GCFGC);
mchbar_write16(MCH_GCFGC, reg16 | 1 << 9);
reg16 &= ~0x7f;
reg16 |= CDCLK_PINEVIEW | CRCLK_PINEVIEW;
reg16 &= ~(1 << 9);
mchbar_write16(MCH_GCFGC, reg16);
/* Graphics core */
reg8 = mchbar_read8(HPLLVCO);
reg8 &= 0x7;
reg16 = pci_read_config16(GMCH_IGD, 0xcc) & ~0x1ff;
if (reg8 == 0x4) {
/* 2666MHz */
reg16 |= 0xad;
} else if (reg8 == 0) {
/* 3200MHz */
reg16 |= 0xa0;
} else if (reg8 == 1) {
/* 4000MHz */
reg16 |= 0xad;
}
pci_write_config16(GMCH_IGD, 0xcc, reg16);
pci_and_config8(GMCH_IGD, 0x62, ~0x3);
pci_or_config8(GMCH_IGD, 0x62, 2);
if (config->use_crt) {
/* Enable VGA */
mchbar_setbits32(DACGIOCTRL1, 1 << 15);
} else {
/* Disable VGA */
mchbar_clrbits32(DACGIOCTRL1, 1 << 15);
}
if (config->use_lvds) {
/* Enable LVDS */
reg32 = mchbar_read32(LVDSICR2);
reg32 &= ~0xf1000000;
reg32 |= 0x90000000;
mchbar_write32(LVDSICR2, reg32);
mchbar_setbits32(IOCKTRR1, 1 << 9);
} else {
/* Disable LVDS */
mchbar_setbits32(DACGIOCTRL1, 3 << 25);
}
mchbar_write32(CICTRL, 0xc6db8b5f);
mchbar_write16(CISDCTRL, 0x024f);
mchbar_clrbits32(DACGIOCTRL1, 0xff);
mchbar_setbits32(DACGIOCTRL1, 1 << 5);
/* Legacy backlight control */
pci_write_config8(GMCH_IGD, 0xf4, 0x4c);
}
static void early_misc_setup(void)
{
mchbar_read32(HIT0);
mchbar_write32(HIT0, 0x00021800);
dmibar_write32(0x2c, 0x86000040);
pci_write_config32(PCI_DEV(0, 0x1e, 0), 0x18, 0x00020200);
pci_write_config32(PCI_DEV(0, 0x1e, 0), 0x18, 0x00000000);
early_graphics_setup();
mchbar_read32(HIT4);
mchbar_write32(HIT4, 0);
mchbar_read32(HIT4);
mchbar_write32(HIT4, 1 << 3);
pci_write_config8(LPC_DEV, 0x08, 0x1d);
pci_write_config8(LPC_DEV, 0x08, 0x00);
RCBA32(0x3410) = 0x00020465;
pci_write_config32(PCI_DEV(0, 0x1d, 0), 0xca, 0x1);
pci_write_config32(PCI_DEV(0, 0x1d, 1), 0xca, 0x1);
pci_write_config32(PCI_DEV(0, 0x1d, 2), 0xca, 0x1);
pci_write_config32(PCI_DEV(0, 0x1d, 3), 0xca, 0x1);
RCBA32(0x3100) = 0x00042210;
RCBA32(0x3108) = 0x10004321;
RCBA32(0x310c) = 0x00214321;
RCBA32(0x3110) = 1;
RCBA32(0x3140) = 0x01460132;
RCBA32(0x3142) = 0x02370146;
RCBA32(0x3144) = 0x32010237;
RCBA32(0x3146) = 0x01463201;
RCBA32(0x3148) = 0x00000146;
}
static void pineview_setup_bars(void)
{
printk(BIOS_DEBUG, "Setting up static northbridge registers...");
pci_write_config8(HOST_BRIDGE, 0x08, 0x69);
/* Set up all hardcoded northbridge BARs */
pci_write_config32(HOST_BRIDGE, EPBAR, CONFIG_FIXED_EPBAR_MMIO_BASE | 1);
pci_write_config32(HOST_BRIDGE, MCHBAR, CONFIG_FIXED_MCHBAR_MMIO_BASE | 1);
pci_write_config32(HOST_BRIDGE, DMIBAR, CONFIG_FIXED_DMIBAR_MMIO_BASE | 1);
pci_write_config32(HOST_BRIDGE, PMIOBAR, DEFAULT_PMIOBAR | 1);
/* Set C0000-FFFFF to access RAM on both reads and writes */
pci_write_config8(HOST_BRIDGE, PAM0, 0x30);
pci_write_config8(HOST_BRIDGE, PAM1, 0x33);
pci_write_config8(HOST_BRIDGE, PAM2, 0x33);
pci_write_config8(HOST_BRIDGE, PAM3, 0x33);
pci_write_config8(HOST_BRIDGE, PAM4, 0x33);
pci_write_config8(HOST_BRIDGE, PAM5, 0x33);
pci_write_config8(HOST_BRIDGE, PAM6, 0x33);
printk(BIOS_DEBUG, " done.\n");
}
void pineview_early_init(void)
{
/* Print some chipset specific information */
printk(BIOS_DEBUG, "Intel Pineview northbridge\n");
/* Setup all BARs required for early PCIe and raminit */
pineview_setup_bars();
/* Miscellaneous setup */
early_misc_setup();
/* Route port80 to LPC */
RCBA32(GCS) &= (~0x04);
RCBA32(0x2010) |= (1 << 10);
}
|
