1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
|
#include <console/console.h>
#include <arch/io.h>
#include <stdint.h>
#include <mem.h>
#include <part/sizeram.h>
#include <device/device.h>
#include <device/pci.h>
#include <stdlib.h>
#include <string.h>
#include <bitops.h>
#include "chip.h"
struct mem_range *sizeram(void)
{
static struct mem_range mem[4];
/* the units of tolm are 64 KB */
/* the units of drb16 are 64 MB */
uint16_t tolm, remapbase, remaplimit, drb16;
uint16_t tolm_r, remapbase_r, remaplimit_r;
uint8_t drb;
int remap_high;
device_t dev;
dev = dev_find_slot(0, 0); // d0f0
if (!dev) {
printk_err("Cannot find PCI: 0:0\n");
return 0;
}
/* Calculate and report the top of low memory and
* any remapping.
*/
/* Test if the remap memory high option is set */
remap_high = 0;
// if(get_option(&remap_high, "remap_memory_high")){
// remap_high = 0;
// }
printk_debug("remap_high is %d\n", remap_high);
/* get out the value of the highest DRB. This tells the end of
* physical memory. The units are ticks of 64 MB i.e. 1 means
* 64 MB.
*/
drb = pci_read_config8(dev, 0x67);
drb16 = (uint16_t)drb;
if(remap_high && (drb16 > 0x08)) {
/* We only come here if we have at least 512MB of memory,
* so it is safe to hard code tolm.
* 0x2000 means 512MB
*/
tolm = 0x2000;
/* i.e 0x40 * 0x40 is 0x1000 which is 4 GB */
if(drb16 > 0x0040) {
/* There is more than 4GB of memory put
* the remap window at the end of ram.
*/
remapbase = drb16;
remaplimit = remapbase + 0x38;
}
else {
remapbase = 0x0040;
remaplimit = remapbase + (drb16-8);
}
}
else {
tolm = (uint16_t)((dev_root.resource[1].base >> 16)&0x0f800);
if((tolm>>8) >= (drb16<<2)) {
tolm = (drb16<<10);
remapbase = 0x3ff;
remaplimit = 0;
}
else {
remapbase = drb16;
remaplimit = remapbase + ((0x0040-(tolm>>10))-1);
}
}
/* Write the ram configruation registers,
* preserving the reserved bits.
*/
tolm_r = pci_read_config16(dev, 0xc4);
tolm |= (tolm_r & 0x7ff);
pci_write_config16(dev, 0xc4, tolm);
remapbase_r = pci_read_config16(dev, 0xc6);
remapbase |= (remapbase_r & 0xfc00);
pci_write_config16(dev, 0xc6, remapbase);
remaplimit_r = pci_read_config16(dev, 0xc8);
remaplimit |= (remaplimit_r & 0xfc00);
pci_write_config16(dev, 0xc8, remaplimit);
#if 0
printk_debug("mem info tolm = %x, drb = %x, pci_memory_base = %x, remap = %x-%x\n",tolm,drb,pci_memory_base,remapbase,remaplimit);
#endif
mem[0].basek = 0;
mem[0].sizek = 640;
mem[1].basek = 768;
/* Convert size in 64K bytes to size in K bytes */
mem[1].sizek = (tolm << 6) - mem[1].basek;
mem[2].basek = 0;
mem[2].sizek = 0;
if ((drb << 16) > (tolm << 6)) {
/* We don't need to consider the remap window
* here because we put it immediately after the
* rest of ram.
* All we must do is calculate the amount
* of unused memory and report it at 4GB.
*/
mem[2].basek = 4096*1024;
mem[2].sizek = (drb << 16) - (tolm << 6);
}
mem[3].basek = 0;
mem[3].sizek = 0;
return mem;
}
static void enumerate(struct chip *chip)
{
extern struct device_operations default_pci_ops_bus;
chip_enumerate(chip);
chip->dev->ops = &default_pci_ops_bus;
}
#if 0
static void northbridge_init(struct chip *chip, enum chip_pass pass)
{
struct northbridge_intel_855pm_config *conf =
(struct northbridge_intel_855pm_config *)chip->chip_info;
switch (pass) {
case CONF_PASS_PRE_PCI:
break;
case CONF_PASS_POST_PCI:
break;
case CONF_PASS_PRE_BOOT:
break;
default:
/* nothing yet */
break;
}
}
#endif
struct chip_control northbridge_intel_855pm_control = {
.enumerate = enumerate,
// .enable = northbridge_init,
.name = "intel E7501 Northbridge",
};
|