1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Advanced Micro Devices, Inc.
* Copyright (C) 2010 Nils Jacobs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <cpu/x86/tsc.h>
#define CLOCK_TICK_RATE 1193180U /* Underlying HZ */
#define CALIBRATE_INTERVAL ((20*CLOCK_TICK_RATE)/1000) /* 20ms */
#define CALIBRATE_DIVISOR (20*1000) /* 20ms / 20000 == 1usec */
/* spll_raw_clk = SYSREF * FbDIV,
* GLIU Clock = spll_raw_clk / MDIV
* CPU Clock = spll_raw_clk / VDIV
*/
/* table for Feedback divisor to FbDiv register value */
static const unsigned char plldiv2fbdiv[] = {
0, 0, 0, 0, 0, 0, 15, 7, 3, 1, 0, 32, 16, 40, 20, 42, /* pll div 0 - 15 */
21, 10, 37, 50, 25, 12, 38, 19, 9, 4, 34, 17, 8, 36, 18, 41, /* pll div 16 - 31 */
52, 26, 45, 54, 27, 13, 6, 35, 49, 56, 28, 46, 23, 11, 05, 02, /* pll div 32 - 47 */
33, 48, 24, 44, 22, 43, 53, 58, 29, 14, 39, 51, 57, 60, 30, 47, /* pll div 48 - 63 */
};
/* table for FbDiv register value to Feedback divisor */
static const unsigned char fbdiv2plldiv[] = {
10, 9, 47, 8, 25, 46, 38, 7, 28, 24, 17, 45, 21, 37, 57, 6,
12, 27, 30, 23, 14, 16, 52, 44, 50, 20, 33, 36, 42, 56, 0, 0,
11, 48, 26, 39, 29, 18, 22, 58, 13, 31, 15, 53, 51, 34, 43, 0,
49, 40, 19, 59, 32, 54, 35, 0, 41, 60, 55, 0, 61, 0, 0, 0
};
/* FbDIV VDIV MDIV CPU/GeodeLink */
/* 12 2 3 200/133 */
/* 16 2 3 266/177 */
/* 18 2 3 300/200 */
/* 20 2 3 333/222 */
/* 22 2 3 366/244 */
/* 24 2 3 400/266 */
/* 26 2 3 433/289 */
/* PLLCHECK_COMPLETED is the "we've already done this" flag */
#define PLLCHECK_COMPLETED (1 << RSTPLL_LOWER_SWFLAGS_SHIFT)
#ifndef RSTPPL_LOWER_BYPASS_SET
#define RSTPPL_LOWER_BYPASS_SET (1 << GLCP_SYS_RSTPLL_BYPASS)
#endif // RSTPPL_LOWER_BYPASS_SET
#define DEFAULT_MDIV 3
#define DEFAULT_VDIV 2
static void pll_reset(void)
{
msr_t msrGlcpSysRstpll;
unsigned MDIV_VDIV_FBDIV;
unsigned SyncBits; /* store the sync bits in up ebx */
unsigned DEFAULT_FBDIV;
if (CONFIG_GX2_PROCESSOR_MHZ == 400) {
DEFAULT_FBDIV = 24;
} else if (CONFIG_GX2_PROCESSOR_MHZ == 366) {
DEFAULT_FBDIV = 22;
} else if (CONFIG_GX2_PROCESSOR_MHZ == 300) {
DEFAULT_FBDIV = 18;
} else {
printk(BIOS_ERR, "Unsupported GX2_PROCESSOR_MHZ setting!\n");
post_code(POST_PLL_CPU_VER_FAIL);
__asm__ __volatile__("hlt\n");
}
/* clear the Bypass bit */
/* If the straps say we are in bypass and the syspll is not AND there are no software */
/* bits set then FS2 or something set up the PLL and we should not change it. */
msrGlcpSysRstpll = rdmsr(GLCP_SYS_RSTPLL);
msrGlcpSysRstpll.lo &= ~RSTPPL_LOWER_BYPASS_SET;
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
/* If the "we've already been here" flag is set, don't reconfigure the pll */
if ( !(msrGlcpSysRstpll.lo & PLLCHECK_COMPLETED ) )
{ /* we haven't configured the PLL; do it now */
/* Store PCI33(0)/66(1), SDR(0)/DDR(1), and CRT(0)/TFT(1) in upper esi to get to the */
/* correct Strap Table. */
post_code(POST_PLL_INIT);
/* configure for DDR */
msrGlcpSysRstpll.lo &= ~(1 << RSTPPL_LOWER_SDRMODE_SHIFT);
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
/* Use Manual settings */
/* UseManual: */
post_code(POST_PLL_MANUAL);
/* DIV settings manually entered. */
/* ax = VDIV, upper eax = MDIV, upper ecx = FbDIV */
/* use gs and fs since we don't need them. */
/* ProgramClocks: */
/* ax = VDIV, upper eax = MDIV, upper ecx = FbDIV */
/* move everything into ebx */
/* VDIV */
MDIV_VDIV_FBDIV = ((DEFAULT_VDIV - 2) << RSTPLL_UPPER_VDIV_SHIFT);
/* MDIV */
MDIV_VDIV_FBDIV |= ((DEFAULT_MDIV - 2) << RSTPLL_UPPER_MDIV_SHIFT);
/* FbDIV */
MDIV_VDIV_FBDIV |= (plldiv2fbdiv[DEFAULT_FBDIV] << RSTPLL_UPPER_FBDIV_SHIFT);
/* write GLCP_SYS_RSTPPL (GLCP reg 0x14) with clock values */
msrGlcpSysRstpll.lo &= ~(1 << RSTPPL_LOWER_SDRMODE_SHIFT);
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
msrGlcpSysRstpll.hi = MDIV_VDIV_FBDIV;
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
/* Set Reset, LockWait, and SW flag */
/* DoReset: */
/* CheckSemiSync proc */
/* Check for Semi-Sync in GeodeLink and CPU. */
/* We need to do this here since the strap settings don't account for these bits. */
SyncBits = 0; /* store the sync bits in up ebx */
/* Check for Bypass mode. */
if (msrGlcpSysRstpll.lo & RSTPPL_LOWER_BYPASS_SET)
{
/* If we are in BYPASS PCI may or may not be sync'd but CPU and GeodeLink will. */
SyncBits |= RSTPPL_LOWER_CPU_SEMI_SYNC_SET;
}
else
{
/* CheckPCIsync: */
/* If FBdiv/Mdiv is evenly divisible then set the PCI semi-sync. FB is always greater */
/* look up the real divider... if we get a 0 we have serious problems */
if ( !(fbdiv2plldiv[((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_FBDIV_SHIFT) & 0x3f)] %
(((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_MDIV_SHIFT) & 0x0F) + 2)) )
{
SyncBits |= RSTPPL_LOWER_PCI_SEMI_SYNC_SET;
}
/* CheckCPUSync: */
/* If Vdiv/Mdiv is evenly divisible then set the CPU semi-sync. */
/* CPU is always greater or equal. */
if (!((((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_MDIV_SHIFT) & 0x07) + 2) %
(((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_VDIV_SHIFT) & 0x0F) + 2)))
{
SyncBits |= RSTPPL_LOWER_CPU_SEMI_SYNC_SET;
}
}
/* SetSync: */
msrGlcpSysRstpll.lo &= ~(RSTPPL_LOWER_PCI_SEMI_SYNC_SET | RSTPPL_LOWER_CPU_SEMI_SYNC_SET);
msrGlcpSysRstpll.lo |= SyncBits;
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
/* CheckSemiSync endp */
/* now we do the reset */
/* Set hold count to 99 (063h) */
msrGlcpSysRstpll.lo &= ~(0x0FF << RSTPPL_LOWER_HOLD_COUNT_SHIFT);
msrGlcpSysRstpll.lo |= (0x0DE << RSTPPL_LOWER_HOLD_COUNT_SHIFT);
msrGlcpSysRstpll.lo |= PLLCHECK_COMPLETED; // Say we are done
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
/* Don't want to use LOCKWAIT */
msrGlcpSysRstpll.lo |= (RSTPPL_LOWER_PLL_RESET_SET + RSTPPL_LOWER_PD_SET);
msrGlcpSysRstpll.lo |= RSTPPL_LOWER_CHIP_RESET_SET;
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
/* You should never get here..... The chip has reset. */
post_code(POST_PLL_RESET_FAIL);
while (1);
} /* we haven't configured the PLL; do it now */
}
static unsigned int GeodeLinkSpeed(void)
{
unsigned geodelinkspeed;
geodelinkspeed = ((CONFIG_GX2_PROCESSOR_MHZ * DEFAULT_VDIV) / DEFAULT_MDIV);
return (geodelinkspeed);
}
|