1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
/*
2005.11 yhlu add let the real sb to use small unitid
*/
// only for sb ht chain
static void enumerate_ht_chain(void)
{
#if CONFIG_HT_CHAIN_UNITID_BASE != 0
/* CONFIG_HT_CHAIN_UNITID_BASE could be 0 (only one ht device in the ht chain), if so, don't need to go through the chain */
/* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
* On most boards this just happens. If a CPU has multiple
* non Coherent links the appropriate bus registers for the
* links needs to be programed to point at bus 0.
*/
unsigned next_unitid, last_unitid;
pci_devfn_t dev;
#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
//let't record the device of last ht device, So we can set the Unitid to CONFIG_HT_CHAIN_END_UNITID_BASE
unsigned real_last_unitid = 0;
uint8_t real_last_pos = 0;
int ht_dev_num = 0; // except host_bridge
uint8_t end_used = 0;
#endif
dev = PCI_DEV(0,0,0);
next_unitid = CONFIG_HT_CHAIN_UNITID_BASE;
do {
uint32_t id;
uint8_t hdr_type, pos;
last_unitid = next_unitid;
id = pci_read_config32(dev, PCI_VENDOR_ID);
/* If the chain is enumerated quit */
if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
(((id >> 16) & 0xffff) == 0xffff) ||
(((id >> 16) & 0xffff) == 0x0000))
{
break;
}
hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE);
pos = 0;
hdr_type &= 0x7f;
if ((hdr_type == PCI_HEADER_TYPE_NORMAL) ||
(hdr_type == PCI_HEADER_TYPE_BRIDGE))
{
pos = pci_read_config8(dev, PCI_CAPABILITY_LIST);
}
while (pos != 0) {
uint8_t cap;
cap = pci_read_config8(dev, pos + PCI_CAP_LIST_ID);
if (cap == PCI_CAP_ID_HT) {
uint16_t flags;
/* Read and write and reread flags so the link
* direction bit is valid.
*/
flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
pci_write_config16(dev, pos + PCI_CAP_FLAGS, flags);
flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
if ((flags >> 13) == 0) {
unsigned count;
unsigned ctrl, ctrl_off;
pci_devfn_t devx;
#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
if (next_unitid >= 0x18) { // don't get mask out by k8, at this time BSP, RT is not enabled, it will response from 0x18,0--0x1f.
if (!end_used) {
next_unitid = CONFIG_HT_CHAIN_END_UNITID_BASE;
end_used = 1;
} else {
goto out;
}
}
real_last_unitid = next_unitid;
real_last_pos = pos;
ht_dev_num++;
#endif
flags &= ~0x1f;
flags |= next_unitid & 0x1f;
count = (flags >> 5) & 0x1f;
devx = PCI_DEV(0, next_unitid, 0);
pci_write_config16(dev, pos + PCI_CAP_FLAGS, flags);
next_unitid += count;
flags = pci_read_config16(devx, pos + PCI_CAP_FLAGS);
/* Test for end of chain */
ctrl_off = ((flags >> 10) & 1)?
PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; // another end
do {
ctrl = pci_read_config16(devx, pos + ctrl_off);
/* Is this the end of the hypertransport chain? */
if (ctrl & (1 << 6)) {
goto out;
}
if (ctrl & ((1 << 4) | (1 << 8))) {
/*
* Either the link has failed, or we have
* a CRC error.
* Sometimes this can happen due to link
* retrain, so lets knock it down and see
* if its transient
*/
ctrl |= ((1 << 4) | (1 <<8)); // Link fail + Crc
pci_write_config16(devx, pos + ctrl_off, ctrl);
ctrl = pci_read_config16(devx, pos + ctrl_off);
if (ctrl & ((1 << 4) | (1 << 8))) {
// can not clear the error
break;
}
}
} while ((ctrl & (1 << 5)) == 0);
break;
}
}
pos = pci_read_config8(dev, pos + PCI_CAP_LIST_NEXT);
}
} while (last_unitid != next_unitid);
out:
;
#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
if ((ht_dev_num > 1) && (real_last_unitid != CONFIG_HT_CHAIN_END_UNITID_BASE) && !end_used) {
uint16_t flags;
dev = PCI_DEV(0,real_last_unitid, 0);
flags = pci_read_config16(dev, real_last_pos + PCI_CAP_FLAGS);
flags &= ~0x1f;
flags |= CONFIG_HT_CHAIN_END_UNITID_BASE & 0x1f;
pci_write_config16(dev, real_last_pos + PCI_CAP_FLAGS, flags);
}
#endif
#endif
}
|
