1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <device/pci_def.h>
#include <device/device.h>
#include <stdlib.h>
#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
/* warning: Porting.h includes an open #pragma pack(1) */
#include "Porting.h"
#include "AGESA.h"
#include "amdlib.h"
#include "dimmSpd.h"
#include "chip.h"
/* uncomment for source level debug - GDB gets really confused otherwise. */
//#pragma optimize ("", off)
/**
* Read a single SPD byte. If the first byte is being read, set up the
* address and offset. Following bytes auto increment.
*/
static UINT8 readSmbusByte(UINT16 iobase, UINT8 address, char *buffer,
int offset, int initial_offset)
{
unsigned int status = -1;
UINT64 time_limit;
/* clear status register */
__outbyte(iobase + SMBUS_STATUS_REG, 0xFF);
__outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x1F);
if (offset == initial_offset) {
/* Set offset, set slave address and start reading */
__outbyte(iobase + SMBUS_CONTROL_REG, offset);
__outbyte(iobase + SMBUS_HOST_CMD_REG, address | READ_BIT);
__outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_BYTE_COMMAND);
} else {
/* Issue read command - auto increments to next byte */
__outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_COMMAND);
}
/* time limit to avoid hanging for unexpected error status */
time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
while (__rdtsc() <= time_limit) {
status = __inbyte(iobase + SMBUS_STATUS_REG);
if ((status & SMBUS_INTERRUPT_MASK) == 0)
continue; /* SMBusInterrupt not set, keep waiting */
if ((status & HOSTBUSY_MASK) != 0)
continue; /* HostBusy set, keep waiting */
break;
}
if (status != STATUS__COMPLETED_SUCCESSFULLY)
return AGESA_ERROR;
buffer[0] = __inbyte(iobase + SMBUS_DATA0_REG);
return AGESA_SUCCESS;
}
/**
* Write a single smbus byte.
*/
UINT8 writeSmbusByte(UINT16 iobase, UINT8 address, UINT8 buffer,
int offset)
{
unsigned int status = -1;
UINT64 time_limit;
/* clear status register */
__outbyte(iobase + SMBUS_STATUS_REG, 0xFF);
__outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x1F);
/* set offset, set slave address, set data and start writing */
__outbyte(iobase + SMBUS_CONTROL_REG, offset);
__outbyte(iobase + SMBUS_HOST_CMD_REG, address & (~READ_BIT));
__outbyte(iobase + SMBUS_DATA0_REG, buffer);
__outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_WRITE_BYTE_COMMAND);
/* time limit to avoid hanging for unexpected error status */
time_limit = __rdtsc() + MAX_READ_TSC_COUNT;
while (__rdtsc() <= time_limit) {
status = __inbyte(iobase + SMBUS_STATUS_REG);
if ((status & SMBUS_INTERRUPT_MASK) == 0)
continue; /* SMBusInterrupt not set, keep waiting */
if ((status & HOSTBUSY_MASK) != 0)
continue; /* HostBusy set, keep waiting */
break;
}
if (status != STATUS__COMPLETED_SUCCESSFULLY)
return AGESA_ERROR;
return AGESA_SUCCESS;
}
static void setupFch(UINT16 ioBase)
{
AMD_CONFIG_PARAMS StdHeader;
UINT32 PciData32;
UINT8 PciData8;
PCI_ADDR PciAddress;
/* Set SMBus MMIO. */
PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0x90);
PciData32 = (ioBase & 0xFFFFFFF0) | BIT0;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData32, &StdHeader);
/* Enable SMBus MMIO. */
PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0xD2);
LibAmdPciRead(AccessWidth8, PciAddress, &PciData8, &StdHeader); ;
PciData8 |= BIT0;
LibAmdPciWrite(AccessWidth8, PciAddress, &PciData8, &StdHeader);
/* Set SMBus clock to 400 KHz */
__outbyte(ioBase + SMBUS_CLOCK_REG, SMBUS_FREQUENCY_CONST / 400000);
}
/**
* Read one or more SPD bytes from a DIMM.
* Start with offset zero and read sequentially.
* Reads 128 bytes in 7-8 ms at 400 KHz.
*/
static UINT8 readspd(UINT16 iobase, UINT8 SmbusSlaveAddress, char *buffer,
UINT16 count)
{
UINT16 index;
UINT8 status;
UINT8 initial_offset = 0;
setupFch(iobase);
for (index = initial_offset; index < count; index++) {
status = readSmbusByte(iobase, SmbusSlaveAddress, &buffer[index], index,
initial_offset);
if (status != AGESA_SUCCESS)
return status;
}
return status;
}
/**
* Gets the SMBus address for an SPD from the array in devicetree.cb
* then read the SPD into the supplied buffer.
*/
AGESA_STATUS agesa_ReadSPD(UINT32 unused1, UINT32 unused2, void *infoptr)
{
UINT8 spdAddress;
AGESA_READ_SPD_PARAMS *info = infoptr;
ROMSTAGE_CONST struct device *dev = dev_find_slot(0, PCI_DEVFN(0x18, 2));
ROMSTAGE_CONST struct northbridge_amd_agesa_family15_config *config = NULL;
if ((dev == 0) || (dev->chip_info == 0))
return AGESA_ERROR;
config = dev->chip_info;
if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup))
return AGESA_ERROR;
if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0]))
return AGESA_ERROR;
if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0]))
return AGESA_ERROR;
spdAddress = config->spdAddrLookup
[info->SocketId][info->MemChannelId][info->DimmId];
if (spdAddress == 0)
return AGESA_ERROR;
return readspd(SMBUS0_BASE_ADDRESS, spdAddress, (void *)info->Buffer, 256);
}
|
