1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
chip soc/intel/cannonlake
# Lock Down
register "common_soc_config" = "{
.i2c[0] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 80,
.fall_time_ns = 110,
},
}"
# CPU (soc/intel/cannonlake/cpu.c)
# Power limit
register "power_limits_config" = "{
.tdp_pl1_override = 20,
.tdp_pl2_override = 30,
}"
# Enable Enhanced Intel SpeedStep
register "eist_enable" = "1"
# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
register "SaGv" = "SaGv_Enabled"
register "enable_c6dram" = "1"
# FSP Silicon (soc/intel/cannonlake/fsp_params.c)
# Serial I/O
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexUART2] = PchSerialIoPci,
}"
# Misc
register "AcousticNoiseMitigation" = "1"
# Power
register "PchPmSlpS3MinAssert" = "3" # 50ms
register "PchPmSlpS4MinAssert" = "1" # 1s
register "PchPmSlpSusMinAssert" = "2" # 500ms
register "PchPmSlpAMinAssert" = "4" # 2s
# Thermal
register "tcc_offset" = "12"
# Serial IRQ Continuous
register "serirq_mode" = "SERIRQ_CONTINUOUS"
# PM Util (soc/intel/cannonlake/pmutil.c)
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "PMC_GPP_C"
register "gpe0_dw1" = "PMC_GPP_D"
register "gpe0_dw2" = "PMC_GPP_E"
# Actual device tree
device cpu_cluster 0 on end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on # Integrated Graphics Device
register "gfx" = "GMA_STATIC_DISPLAYS(0)"
end
device pci 04.0 on # SA Thermal device
register "Device4Enable" = "1"
end
device pci 12.0 on end # Thermal Subsystem
device pci 12.5 off end # UFS SCS
device pci 12.6 off end # GSPI #2
device pci 13.0 off end # Integrated Sensor Hub
device pci 14.0 on # USB xHCI
register "usb2_ports" = "{
[0] = USB2_PORT_MID(OC_SKIP), /* USB-A */
[1] = USB2_PORT_MID(OC_SKIP), /* 3G / LTE */
[2] = USB2_PORT_TYPE_C(OC_SKIP), /* USB-C */
[3] = USB2_PORT_MID(OC_SKIP), /* USB-A */
[6] = USB2_PORT_MAX(OC_SKIP), /* Camera */
[9] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */
}"
register "usb3_ports" = "{
[0] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-A */
[1] = USB3_PORT_DEFAULT(OC_SKIP), /* 4G on galp3-c, NC on darp5 */
[2] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-C */
[3] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-A */
[4] = USB3_PORT_EMPTY, /* Used by TBT */
[5] = USB3_PORT_EMPTY, /* Used by TBT */
}"
end
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.3 on # CNVi wifi
chip drivers/wifi/generic
register "wake" = "PME_B0_EN_BIT"
device generic 0 on end
end
end
device pci 14.5 off end # SDCard
device pci 15.0 on end # I2C #0
device pci 15.1 off end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 16.5 off end # Management Engine Interface 4
device pci 17.0 on # SATA
register "SataPortsEnable" = "{
[0] = 1,
[2] = 1,
}"
end
device pci 19.0 off end # I2C #4
device pci 19.1 off end # I2C #5
device pci 19.2 on end # UART #2
device pci 1a.0 off end # eMMC
device pci 1c.0 on end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 on # PCI Express Port 5
# PCI Express Root port #5 x4, Clock 4 (TBT)
register "PcieRpEnable[4]" = "1"
register "PcieRpLtrEnable[4]" = "1"
register "PcieRpHotPlug[4]" = "1"
register "PcieClkSrcUsage[4]" = "4"
register "PcieClkSrcClkReq[4]" = "4"
end
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 on # PCI Express Port 9
# PCI Express Root port #9 x1, Clock 3 (LAN)
register "PcieRpEnable[8]" = "1"
register "PcieRpLtrEnable[8]" = "1"
register "PcieClkSrcUsage[3]" = "8"
register "PcieClkSrcClkReq[3]" = "3"
end
device pci 1d.1 on # PCI Express Port 10
# PCI Express Root port #10 x1, Clock 2 (WLAN)
register "PcieRpEnable[9]" = "1"
register "PcieRpLtrEnable[9]" = "0"
register "PcieClkSrcUsage[2]" = "9"
register "PcieClkSrcClkReq[2]" = "2"
end
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1d.4 on # PCI Express Port 13
# PCI Express Root port #13 x4, Clock 5 (NVMe)
register "PcieRpEnable[12]" = "1"
register "PcieRpLtrEnable[12]" = "1"
register "PcieClkSrcUsage[5]" = "12"
register "PcieClkSrcClkReq[5]" = "5"
end
device pci 1d.5 off end # PCI Express Port 14
device pci 1d.6 off end # PCI Express Port 15
device pci 1d.7 off end # PCI Express Port 16
device pci 1e.0 off end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1f.0 on # LPC Interface
register "gen1_dec" = "0x000c0081"
register "gen2_dec" = "0x00040069"
register "gen3_dec" = "0x00fc0e01"
register "gen4_dec" = "0x00fc0f01"
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
end
device pci 1f.1 off end # P2SB
device pci 1f.2 hidden end # Power Management Controller
device pci 1f.3 on # Intel HDA
register "PchHdaAudioLinkHda" = "1"
register "PchHdaAudioLinkDmic0" = "1"
register "PchHdaAudioLinkDmic1" = "1"
end
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end
|
