summaryrefslogtreecommitdiff
path: root/src/mainboard/system76/adl/variants/gaze17-3060-b/overridetree.cb
blob: 213fa64b3e5ea2e4818c923a6f4759e26922c544 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
chip soc/intel/alderlake
	# FIVR configuration
	#   Read EXT_RAIL_CONFIG to determine bitmaps
	#     sudo devmem2 0xfe0011b8
	#     0x0
	#   Read EXT_V1P05_VR_CONFIG
	#     sudo devmem2 0xfe0011c0
	#     0x1a42000
	#   Read EXT_VNN_VR_CONFIG0
	#     sudo devmem2 0xfe0011c4
	#     0x1a42000
	# TODO: v1p05 voltage and vnn icc max?
	register "ext_fivr_settings" = "{
		.configure_ext_fivr = 1,
		.v1p05_enable_bitmap = 0,
		.vnn_enable_bitmap = 0,
		.v1p05_supported_voltage_bitmap = 0,
		.vnn_supported_voltage_bitmap = 0,
		.v1p05_icc_max_ma = 500,
		.vnn_sx_voltage_mv = 1050,
	}"

	# Thermal
	register "tcc_offset" = "10"

	# GPE configuration
	register "pmc_gpe0_dw0" = "PMC_GPP_R"
	register "pmc_gpe0_dw1" = "PMC_GPP_B"
	register "pmc_gpe0_dw2" = "PMC_GPP_D"

	device domain 0 on
		subsystemid 0x1558 0x867c inherit

		device ref pcie5_0 on
			# PCIe PEG2 x8, Clock 3 (DGPU)
			register "cpu_pcie_rp[CPU_RP(2)]" = "{
				.clk_src = 3,
				.clk_req = 3,
				.flags = PCIE_RP_LTR,
			}"
		end
		device ref igpu on
			# DDIA is eDP
			register "ddi_portA_config" = "1"
			register "ddi_ports_config[DDI_PORT_A]" = "DDI_ENABLE_HPD"

			register "gfx" = "GMA_DEFAULT_PANEL(0)"
		end
		device ref pcie4_0 on
			# PCIe PEG0 x4, Clock 0 (SSD2)
			register "cpu_pcie_rp[CPU_RP(1)]" = "{
				.clk_src = 0,
				.clk_req = 0,
				.flags = PCIE_RP_LTR,
			}"
		end
		device ref i2c0 on
			# Touchpad I2C bus
			register "serial_io_i2c_mode[PchSerialIoIndexI2C0]" = "PchSerialIoPci"
			chip drivers/i2c/hid
				register "generic.hid" = ""ELAN0412""
				register "generic.desc" = ""ELAN Touchpad""
				register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A17)"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 15 on end
			end
			chip drivers/i2c/hid
				register "generic.hid" = ""FTCS1000""
				register "generic.desc" = ""FocalTech Touchpad""
				register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A17)"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 38 on end
			end
		end
		device ref i2c1 off end
		device ref tcss_xhci on
			register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
			device ref tcss_root_hub on
				device ref tcss_usb3_port1 on end
			end
		end
		device ref tcss_dma0 on end
		device ref xhci on
			# USB2
			register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.2 Type-A audio board
			register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB 3.2 Type-C
			register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # USB 2.0 Type-A audio board
			register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint
			register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Camera
			register "usb2_ports[8]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Thunderbolt Type-C
			register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
			# USB3
			register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.2 Type-A audio board
			register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.2 Type-C side A
			register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.2 Type-C side B
		end
		device ref pcie_rp5 on
			# PCIe root port #5 x1, Clock 2 (WLAN)
			register "pch_pcie_rp[PCH_RP(5)]" = "{
				.clk_src = 2,
				.clk_req = 2,
				.flags = PCIE_RP_LTR,
			}"
		end
		device ref pcie_rp6 on
			# PCIe root port #6 x1, Clock 5 (CARD)
			register "pch_pcie_rp[PCH_RP(6)]" = "{
				.clk_src = 5,
				.clk_req = 5,
				.flags = PCIE_RP_LTR,
			}"
		end
		device ref pcie_rp7 on
			# PCIe root port #7 x1, Clock 6 (GLAN)
			# Clock source is shared with LAN and hence marked as free running.
			register "pch_pcie_rp[PCH_RP(7)]" = "{
				.clk_src = 6,
				.clk_req = 6,
				.flags = PCIE_RP_LTR | PCIE_RP_CLK_SRC_UNUSED,
			}"
			register "pcie_clk_config_flag[6]" = "PCIE_CLK_FREE_RUNNING"
		end
		device ref pcie_rp9 on
			# PCIe root port #9 x4, Clock 1 (SSD1)
			register "pch_pcie_rp[PCH_RP(9)]" = "{
				.clk_src = 1,
				.clk_req = 1,
				.flags = PCIE_RP_LTR,
			}"
		end
		device ref gbe on end
	end
end