1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
chip soc/intel/skylake
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
register "gen1_dec" = "0x007c0a01" # Super IO SWC
register "gen2_dec" = "0x000c0ca1" # IPMI KCS
# Additional FSP Configuration
# This board has an IGD with no output.
register "PrimaryDisplay" = "Display_Auto"
# NB: Overcurrent OCx values untested
register "usb2_ports" = "{
[0] = USB2_PORT_MID(OC3), /* USB 6 (3.0) */
[1] = USB2_PORT_MID(OC3), /* USB 7 (3.0) */
[2] = USB2_PORT_MID(OC2), /* USB 0 */
[3] = USB2_PORT_MID(OC2), /* USB 1 */
[4] = USB2_PORT_MID(OC1), /* USB 4 */
[5] = USB2_PORT_MID(OC1), /* USB 5 */
[8] = USB2_PORT_MID(OC0), /* USB 2 */
[9] = USB2_PORT_MID(OC0), /* USB 3 */
[10] = USB2_PORT_MID(OC5), /* USB 9 (3.0) */
[11] = USB2_PORT_MID(OC5), /* USB 10 (3.0) */
[12] = USB2_PORT_MID(OC4), /* USB 8 (3.0) */
[13] = USB2_PORT_MID(OC_SKIP), /* IPMI USB hub */
[14] = USB2_PORT_MID(OC0), /* Unknown */
[15] = USB2_PORT_MID(OC0), /* Unknown */
}"
register "usb3_ports" = "{
[0] = USB3_PORT_DEFAULT(OC3), /* USB 6 */
[1] = USB3_PORT_DEFAULT(OC3), /* USB 7 */
[2] = USB3_PORT_DEFAULT(OC4), /* USB 8 */
[3] = USB3_PORT_DEFAULT(OC5), /* USB 9 */
[4] = USB3_PORT_DEFAULT(OC5), /* USB 10 */
}"
device domain 0 on
device ref peg0 on
# Slot JSXB1B
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong" "CPU SLOT1 PCI-E 3.0 X16" "SlotDataBusWidth16X"
end
device ref pcie_rp1 on
register "PcieRpEnable[0]" = "1"
device pci 00.0 on end # GbE
end
device ref pcie_rp2 on
register "PcieRpEnable[1]" = "1"
device pci 00.0 on end # GbE
end
device ref pcie_rp5 on
register "PcieRpEnable[4]" = "1"
smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2 2280" "SlotDataBusWidth4X"
end
device ref pcie_rp9 on
# Slot JSXB2
register "PcieRpEnable[8]" = "1"
smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthShort" "PCH SLOT2 PCI-E 3.0 X4(IN X8)" "SlotDataBusWidth4X"
end
device ref pcie_rp13 on
register "PcieRpEnable[12]" = "1"
device pci 00.0 on # Aspeed PCI Bridge
device pci 00.0 on end # Aspeed 2400 VGA
end
end
device ref lpc_espi on
chip drivers/ipmi
# On cold boot it takes a while for the BMC to start the IPMI service
register "wait_for_bmc" = "1"
register "bmc_boot_timeout" = "60"
device pnp ca2.0 on end # IPMI KCS
end
chip superio/common
device pnp 2e.0 on
chip superio/aspeed/ast2400
device pnp 2e.2 on # SUART1
io 0x60 = 0x3f8
irq 0x70 = 4
drq 0xf0 = 0x00
end
device pnp 2e.3 on # SUART2
io 0x60 = 0x2f8
irq 0x70 = 3
drq 0xf0 = 0x00
end
device pnp 2e.4 on # SWC
io 0x60 = 0xa00
io 0x62 = 0xa10
io 0x64 = 0xa20
io 0x66 = 0xa30
irq 0x70 = 0x00
end
device pnp 2e.5 off end # KBC
device pnp 2e.7 on # GPIO
irq 0x70 = 0x00
end
device pnp 2e.b off end # SUART3
device pnp 2e.c off end # SUART4
device pnp 2e.d on # iLPC2AHB
irq 0x70 = 0x00
end
device pnp 2e.e on # Mailbox
io 0x60 = 0xa40
irq 0x70 = 0x00
end
end
end
end
end
end
end
|
