1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 secunet Security Networks AG
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <bootblock_common.h>
#include <arch/io.h>
#include <device/pnp_ops.h>
#include <superio/smsc/lpc47n227/lpc47n227.h>
#define SERIAL_DEV PNP_DEV(0x2e, LPC47N227_SP1)
void bootblock_mainboard_early_init(void)
{
/* Original settings:
idx 30 31 32 33 34 35 36 37 38 39
val 60 00 00 40 00 ff 00 e0 00 80
def 00 00 00 00 00 00 00 00 00 80
Values:
GP1 GP2 GP3 GP4
fd 17 88 14
*/
const pnp_devfn_t sio = PNP_DEV(0x2e, 0);
/* Enter super-io's configuration state. */
pnp_enter_conf_state(sio);
/* Set lpc47n227's runtime register block's base address. */
pnp_write_config(sio, 0x30, 0x600 >> 4);
/* Set GP23 to alternate function. */
pnp_write_config(sio, 0x33, 0x40);
/* Set GP30 - GP37 to output mode: COM control */
pnp_write_config(sio, 0x35, 0xff);
/* Set GP45 - GP47 to output mode. */
pnp_write_config(sio, 0x37, 0xe0);
/* Set nIO_PME to open drain. */
pnp_write_config(sio, 0x39, 0x80);
/* Exit configuration state. */
pnp_exit_conf_state(sio);
/* Set GPIO output values: */
outb(0x88, 0x600 + 0xb + 3); /* GP30 - GP37 */
outb(0x10, 0x600 + 0xb + 4); /* GP40 - GP47 */
lpc47n227_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
|
