1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
|
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define ASSEMBLY 1
#include <stdint.h>
#include <spd.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "cpu/x86/bist.h"
#include "cpu/x86/msr.h"
#include <cpu/amd/lxdef.h>
#include <cpu/amd/geode_post_code.h>
#include "southbridge/amd/cs5536/cs5536.h"
#define POST_CODE(x) outb(x, 0x80)
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
/* The alix1c has no SMBUS; the setup is hard-wired. */
void cs5536_enable_smbus(void)
{
}
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
/* the part is a hynix hy5du121622ctp-d43
* HY 5D U 12 16 2 2 C <blank> T <blank> P D43
* Hynix
* DDR SDRAM (5D)
* VDD 2.5 VDDQ 2.5 (U)
* 512M 8K REFRESH (12)
* x16 (16)
* 4banks (2)
* SSTL_2 (2)
* 4th GEN die (C)
* Normal Power Consumption (<blank> )
* TSOP (T)
* Single Die (<blank>)
* Lead Free (P)
* DDR400 3-3-3 (D43)
*/
/* spd array */
static u8 spdbytes[] = {
[SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10,
[SPD_BANK_DENSITY] = 0x40,
[SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff,
[SPD_MEMORY_TYPE] = 7,
[SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* This is a guess for tRAC value */
[SPD_MODULE_ATTRIBUTES] = 0xff, /* fix me later when we figure out */
[SPD_NUM_BANKS_PER_SDRAM] = 4,
[SPD_PRIMARY_SDRAM_WIDTH] = 8,
/* alix1c is 1 bank. */
[SPD_NUM_DIMM_BANKS] = 1,
[SPD_NUM_COLUMNS] = 0xa,
[SPD_NUM_ROWS] = 3,
[SPD_REFRESH] = 0x3a,
[SPD_SDRAM_CYCLE_TIME_2ND] = 60,
[SPD_SDRAM_CYCLE_TIME_3RD] = 75,
[SPD_tRAS] = 40,
[SPD_tRCD] = 15,
[SPD_tRFC] = 70,
[SPD_tRP] = 15,
[SPD_tRRD] = 10,
};
static u8 spd_read_byte(u8 device, u8 address)
{
print_debug("spd_read_byte dev ");
print_debug_hex8(device);
if (device != (0x50<<1)){
print_debug(" returns 0xff\n");
return 0xff;
}
print_debug(" addr ");
print_debug_hex8(address);
print_debug(" returns ");
print_debug_hex8(spdbytes[address]);
print_debug("\r\n");
return spdbytes[address];
}
#define ManualConf 0 /* Do automatic strapped PLL config */
#define PLLMSRhi 0x00001490 /* manual settings for the PLL */
#define PLLMSRlo 0x02000030
#define DIMM0 0xA0
#define DIMM1 0xA2
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
#include "sdram/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
static void msr_init(void)
{
msr_t msr;
/* Setup access to the MC for under 1MB. Note MC not setup yet. */
msr.hi = 0x24fffc02;
msr.lo = 0x10010000;
wrmsr(CPU_RCONF_DEFAULT, msr);
msr.hi = 0x20000000;
msr.lo = 0xfff00;
wrmsr(MSR_GLIU0 + 0x20, msr);
msr.hi = 0x20000000;
msr.lo = 0xfff00;
wrmsr(MSR_GLIU1 + 0x20, msr);
}
static void mb_gpio_init(void)
{
/* Early mainboard specific GPIO setup */
}
void cache_as_ram_main(void)
{
static const struct mem_controller memctrl[] = {
{.channel0 = {0x50}},
};
extern void RestartCAR();
POST_CODE(0x01);
SystemPreInit();
msr_init();
cs5536_early_setup();
/* NOTE: must do this AFTER the early_setup!
* it is counting on some early MSR setup
* for cs5536
*/
cs5536_disable_internal_uart();
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
mb_gpio_init();
uart_init();
console_init();
pll_reset(ManualConf);
cpuRegInit();
sdram_initialize(1, memctrl);
/* Check memory */
/* enable this only if you are having questions */
/* ram_check(0x00000000, 640 * 1024);*/
/* Switch from Cache as RAM to real RAM
* There are two ways we could think about this.
*
* 1. If we are using the auto.inc ROMCC way, the stack is
* going to be re-setup in the code following this code. Just
* wbinvd the stack to clear the cache tags. We don't care
* where the stack used to be.
*
* 2. This file is built as a normal .c -> .o and linked in
* etc. The stack might be used to return etc. That means we
* care about what is in the stack. If we are smart we set
* the CAR stack to the same location as the rest of
* LinuxBIOS. If that is the case we can just do a wbinvd.
* The stack will be written into real RAM that is now setup
* and we continue like nothing happened. If the stack is
* located somewhere other than where LB would like it, you
* need to write some code to do a copy from cache to RAM
*
* We use method 1 on Norwich and on this board too.
*/
POST_CODE(0x02);
print_err("POST 02\n");
__asm__("wbinvd\n");
print_err("Past wbinvd\n");
/* we are finding the return does not work on this
* board. Explicitly call the label that is after the call to
* us. This is gross, but sometimes at this level it is the
* only way out
*/
done_cache_as_ram_main();
}
|