1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _PLATFORM_CFG_H_
#define _PLATFORM_CFG_H_
/**
* @def BIOS_SIZE
* BIOS_SIZE_{1,2,4,8,16}M
*
* In SB800, default ROM size is 1M Bytes, if your platform ROM
* bigger than 1M you have to set the ROM size outside CIMx module and
* before AGESA module get call.
*/
#ifndef BIOS_SIZE
#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1)
#endif /* BIOS_SIZE */
/**
* @def SPREAD_SPECTRUM
* @brief
* 0 - Disable Spread Spectrum function
* 1 - Enable Spread Spectrum function
*/
#define SPREAD_SPECTRUM 0
/**
* @def SB_HPET_TIMER
* @brief
* 0 - Disable hpet
* 1 - Enable hpet
*/
#define HPET_TIMER 1
/**
* @def USB_CONFIG
* @brief bit[0-6] used to control USB
* 0 - Disable
* 1 - Enable
* Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0
* Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1
* Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2
* Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3
* Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4
* Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5
* Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6
*/
#define USB_CONFIG 0x0F
/**
* @def PCI_CLOCK_CTRL
* @brief bit[0-4] used for PCI Slots Clock Control,
* 0 - disable
* 1 - enable
* PCI SLOT 0 define at BIT0
* PCI SLOT 1 define at BIT1
* PCI SLOT 2 define at BIT2
* PCI SLOT 3 define at BIT3
* PCI SLOT 4 define at BIT4
*/
#define PCI_CLOCK_CTRL 0x1E
/**
* @def SATA_CONTROLLER
* @brief INCHIP Sata Controller
*/
#define SATA_CONTROLLER CIMX_OPTION_ENABLED
/**
* @def SATA_MODE
* @brief INCHIP Sata Controller Mode
* NOTE: DO NOT ALLOW SATA & IDE use same mode
*/
#define SATA_MODE CONFIG_SB800_SATA_MODE
/**
* @brief INCHIP Sata IDE Controller Mode
*/
#define IDE_LEGACY_MODE 0
#define IDE_NATIVE_MODE 1
/**
* @def SATA_IDE_MODE
* @brief INCHIP Sata IDE Controller Mode
* NOTE: DO NOT ALLOW SATA & IDE use same mode
*/
#define SATA_IDE_MODE IDE_LEGACY_MODE
/**
* @def EXTERNAL_CLOCK
* @brief 00/10: Reference clock from crystal oscillator via
* PAD_XTALI and PAD_XTALO
*
* @def INTERNAL_CLOCK
* @brief 01/11: Reference clock from internal clock through
* CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
*/
#define EXTERNAL_CLOCK 0x00
#define INTERNAL_CLOCK 0x01
/* NOTE: inagua have to using internal clock,
* otherwise can not detect sata drive
*/
#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
/**
* @def SATA_PORT_MULT_CAP_RESERVED
* @brief 1 ON, 0 0FF
*/
#define SATA_PORT_MULT_CAP_RESERVED 1
/**
* @def AZALIA_AUTO
* @brief Detect Azalia controller automatically.
*
* @def AZALIA_DISABLE
* @brief Disable Azalia controller.
* @def AZALIA_ENABLE
* @brief Enable Azalia controller.
*/
#define AZALIA_AUTO 0
#define AZALIA_DISABLE 1
#define AZALIA_ENABLE 2
/**
* @brief INCHIP HDA controller
*/
#define AZALIA_CONTROLLER AZALIA_AUTO
/**
* @def AZALIA_PIN_CONFIG
* @brief
* 0 - disable
* 1 - enable
*/
#define AZALIA_PIN_CONFIG 1
/**
* @def AZALIA_SDIN_PIN
* @brief
* SDIN0 is define at BIT0 & BIT1
* 00 - GPIO PIN
* 01 - Reserved
* 10 - As a Azalia SDIN pin
* SDIN1 is define at BIT2 & BIT3
* SDIN2 is define at BIT4 & BIT5
* SDIN3 is define at BIT6 & BIT7
*/
#define AZALIA_SDIN_PIN 0x2A
/**
* @def GPP_CONTROLLER
*/
#define GPP_CONTROLLER CIMX_OPTION_ENABLED
/**
* @def GPP_CFGMODE
* @brief GPP Link Configuration
* four possible configuration:
* GPP_CFGMODE_X4000
* GPP_CFGMODE_X2200
* GPP_CFGMODE_X2110
* GPP_CFGMODE_X1111
*/
#define GPP_CFGMODE GPP_CFGMODE_X1111
/**
* @def NB_SB_GEN2
* 0 - Disable
* 1 - Enable
*/
#define NB_SB_GEN2 TRUE
/**
* @def SB_GPP_GEN2
* 0 - Disable
* 1 - Enable
*/
#define SB_GPP_GEN2 TRUE
/**
* @def SB_GPP_UNHIDE_PORTS
* TRUE - ports visible always, even port empty
* FALSE - ports invisible if port empty
*/
#define SB_GPP_UNHIDE_PORTS FALSE
/**
* @def GEC_CONFIG
* 0 - Enable
* 1 - Disable
*/
#define GEC_CONFIG 1
static const CODECENTRY sample_codec_alc886[] = /* Realtek ALC886/8 */
{
/* NID, PinConfig (Verbs 71F..C) */
{0x11, 0x411111F0}, /* NPC */
{0x12, 0x411111F0}, /* DMIC */
{0x14, 0x01214110}, /* FRONT (Port-D) */
{0x15, 0x01011112}, /* SURR (Port-A) */
{0x16, 0x01016111}, /* CEN/LFE (Port-G) */
{0x17, 0x411111F0}, /* SIDESURR (Port-H) */
{0x18, 0x01A19930}, /* MIC1 (Port-B) */
{0x19, 0x411111F0}, /* MIC2 (Port-F) */
{0x1A, 0x0181313F}, /* LINE1 (Port-C) */
{0x1B, 0x411111F0}, /* LINE2 (Port-E) */
{0x1C, 0x411111F0}, /* CD-IN */
{0x1D, 0x40132601}, /* BEEP-IN */
{0x1E, 0x01441120}, /* S/PDIF-OUT */
{0x1F, 0x01C46140}, /* S/PDIF-IN */
{0xff, 0xffffffff} /* end of table */
};
static const CODECTBLLIST codec_tablelist[] =
{
{0x10ec0888, (CODECENTRY*)&sample_codec_alc886[0]},
{0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL}
};
/**
* @def AZALIA_OEM_VERB_TABLE
* Mainboard specific codec verb table list
*/
#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0])
/* set up an ACPI preferred power management profile */
/* from acpi.h
* PM_UNSPECIFIED = 0,
* PM_DESKTOP = 1,
* PM_MOBILE = 2,
* PM_WORKSTATION = 3,
* PM_ENTERPRISE_SERVER = 4,
* PM_SOHO_SERVER = 5,
* PM_APPLIANCE_PC = 6,
* PM_PERFORMANCE_SERVER = 7,
* PM_TABLET = 8
*/
#define FADT_PM_PROFILE 1
#endif
|
